net: stmmac: add clocks management for gmac driver

This patch intends to add clocks management for stmmac driver:

If CONFIG_PM enabled:
1. Keep clocks disabled after driver probed.
2. Enable clocks when up the net device, and disable clocks when down
the net device.

If CONFIG_PM disabled:
Keep clocks always enabled after driver probed.

Note:
1. It is fine for ethtool, since the way of implementing ethtool_ops::begin
in stmmac is only can be accessed when interface is enabled, so the clocks
are ticked.
2. The MDIO bus has a different life cycle to the MAC, need ensure
clocks are enabled when _mdio_read/write() need clocks, because these
functions can be called while the interface it not opened.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>

drivers/net/ethernet/stmicro/stmmac/stmmac.h

@@ -272,6 +272,7 @@ void stmmac_disable_eee_mode(struct stmmac_priv *priv);
 bool stmmac_eee_init(struct stmmac_priv *priv);
 int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt);
 int stmmac_reinit_ringparam(struct net_device *dev, u32 rx_size, u32 tx_size);
+int stmmac_bus_clks_config(struct stmmac_priv *priv, bool enabled);
 
 #if IS_ENABLED(CONFIG_STMMAC_SELFTESTS)
 void stmmac_selftest_run(struct net_device *dev,

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -28,6 +28,7 @@
 #include <linux/if_vlan.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
+#include <linux/pm_runtime.h>
 #include <linux/prefetch.h>
 #include <linux/pinctrl/consumer.h>
 #ifdef CONFIG_DEBUG_FS
@@ -113,6 +114,28 @@ static void stmmac_exit_fs(struct net_device *dev);
 
 #define STMMAC_COAL_TIMER(x) (ns_to_ktime((x) * NSEC_PER_USEC))
 
+int stmmac_bus_clks_config(struct stmmac_priv *priv, bool enabled)
+{
+	int ret = 0;
+
+	if (enabled) {
+		ret = clk_prepare_enable(priv->plat->stmmac_clk);
+		if (ret)
+			return ret;
+		ret = clk_prepare_enable(priv->plat->pclk);
+		if (ret) {
+			clk_disable_unprepare(priv->plat->stmmac_clk);
+			return ret;
+		}
+	} else {
+		clk_disable_unprepare(priv->plat->stmmac_clk);
+		clk_disable_unprepare(priv->plat->pclk);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(stmmac_bus_clks_config);
+
 /**
  * stmmac_verify_args - verify the driver parameters.
  * Description: it checks the driver parameters and set a default in case of
@@ -2800,6 +2823,12 @@ static int stmmac_open(struct net_device *dev)
 	u32 chan;
 	int ret;
 
+	ret = pm_runtime_get_sync(priv->device);
+	if (ret < 0) {
+		pm_runtime_put_noidle(priv->device);
+		return ret;
+	}
+
 	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 	    priv->hw->pcs != STMMAC_PCS_RTBI &&
 	    priv->hw->xpcs == NULL) {
@@ -2808,7 +2837,7 @@ static int stmmac_open(struct net_device *dev)
 			netdev_err(priv->dev,
 				   "%s: Cannot attach to PHY (error: %d)\n",
 				   __func__, ret);
-			return ret;
+			goto init_phy_error;
 		}
 	}
 
@@ -2924,6 +2953,8 @@ static int stmmac_open(struct net_device *dev)
 	free_dma_desc_resources(priv);
 dma_desc_error:
 	phylink_disconnect_phy(priv->phylink);
+init_phy_error:
+	pm_runtime_put(priv->device);
 	return ret;
 }
 
@@ -2974,6 +3005,8 @@ static int stmmac_release(struct net_device *dev)
 
 	stmmac_release_ptp(priv);
 
+	pm_runtime_put(priv->device);
+
 	return 0;
 }
 
@@ -4624,6 +4657,12 @@ static int stmmac_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vi
 	bool is_double = false;
 	int ret;
 
+	ret = pm_runtime_get_sync(priv->device);
+	if (ret < 0) {
+		pm_runtime_put_noidle(priv->device);
+		return ret;
+	}
+
 	if (be16_to_cpu(proto) == ETH_P_8021AD)
 		is_double = true;
 
@@ -4632,10 +4671,15 @@ static int stmmac_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vi
 	if (priv->hw->num_vlan) {
 		ret = stmmac_del_hw_vlan_rx_fltr(priv, ndev, priv->hw, proto, vid);
 		if (ret)
-			return ret;
+			goto del_vlan_error;
 	}
 
-	return stmmac_vlan_update(priv, is_double);
+	ret = stmmac_vlan_update(priv, is_double);
+
+del_vlan_error:
+	pm_runtime_put(priv->device);
+
+	return ret;
 }
 
 static const struct net_device_ops stmmac_netdev_ops = {
@@ -5074,6 +5118,10 @@ int stmmac_dvr_probe(struct device *device,
 
 	stmmac_check_pcs_mode(priv);
 
+	pm_runtime_get_noresume(device);
+	pm_runtime_set_active(device);
+	pm_runtime_enable(device);
+
 	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 	    priv->hw->pcs != STMMAC_PCS_RTBI) {
 		/* MDIO bus Registration */
@@ -5111,6 +5159,11 @@ int stmmac_dvr_probe(struct device *device,
 	stmmac_init_fs(ndev);
 #endif
 
+	/* Let pm_runtime_put() disable the clocks.
+	 * If CONFIG_PM is not enabled, the clocks will stay powered.
+	 */
+	pm_runtime_put(device);
+
 	return ret;
 
 error_serdes_powerup:
@@ -5125,6 +5178,7 @@ int stmmac_dvr_probe(struct device *device,
 	stmmac_napi_del(ndev);
 error_hw_init:
 	destroy_workqueue(priv->wq);
+	stmmac_bus_clks_config(priv, false);
 
 	return ret;
 }
@@ -5157,8 +5211,8 @@ int stmmac_dvr_remove(struct device *dev)
 	phylink_destroy(priv->phylink);
 	if (priv->plat->stmmac_rst)
 		reset_control_assert(priv->plat->stmmac_rst);
-	clk_disable_unprepare(priv->plat->pclk);
-	clk_disable_unprepare(priv->plat->stmmac_clk);
+	pm_runtime_put(dev);
+	pm_runtime_disable(dev);
 	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 	    priv->hw->pcs != STMMAC_PCS_RTBI)
 		stmmac_mdio_unregister(ndev);
@@ -5181,6 +5235,7 @@ int stmmac_suspend(struct device *dev)
 	struct net_device *ndev = dev_get_drvdata(dev);
 	struct stmmac_priv *priv = netdev_priv(ndev);
 	u32 chan;
+	int ret;
 
 	if (!ndev || !netif_running(ndev))
 		return 0;
@@ -5224,8 +5279,9 @@ int stmmac_suspend(struct device *dev)
 		pinctrl_pm_select_sleep_state(priv->device);
 		/* Disable clock in case of PWM is off */
 		clk_disable_unprepare(priv->plat->clk_ptp_ref);
-		clk_disable_unprepare(priv->plat->pclk);
-		clk_disable_unprepare(priv->plat->stmmac_clk);
+		ret = pm_runtime_force_suspend(dev);
+		if (ret)
+			return ret;
 	}
 	mutex_unlock(&priv->lock);
 
@@ -5289,8 +5345,9 @@ int stmmac_resume(struct device *dev)
 	} else {
 		pinctrl_pm_select_default_state(priv->device);
 		/* enable the clk previously disabled */
-		clk_prepare_enable(priv->plat->stmmac_clk);
-		clk_prepare_enable(priv->plat->pclk);
+		ret = pm_runtime_force_resume(dev);
+		if (ret)
+			return ret;
 		if (priv->plat->clk_ptp_ref)
 			clk_prepare_enable(priv->plat->clk_ptp_ref);
 		/* reset the phy so that it's ready */