staging: r8188eu: introduce new include dir for RTL8188eu driver

This patchset is split in order to keep the file sizes down. This
include directory is part of the newer/better driver from GitHub
modified by Larry Finger. Import this as the basis for all future
work going forward.

Suggested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>

drivers/staging/r8188eu/include/Hal8188EPhyCfg.h

@@ -0,0 +1,269 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __INC_HAL8188EPHYCFG_H__
+#define __INC_HAL8188EPHYCFG_H__
+
+/*--------------------------Define Parameters-------------------------------*/
+#define LOOP_LIMIT			5
+#define MAX_STALL_TIME			50		/* us */
+#define AntennaDiversityValue		0x80
+#define MAX_TXPWR_IDX_NMODE_92S		63
+#define Reset_Cnt_Limit			3
+
+#define IQK_MAC_REG_NUM			4
+#define IQK_ADDA_REG_NUM		16
+#define IQK_BB_REG_NUM			9
+#define HP_THERMAL_NUM			8
+
+#define MAX_AGGR_NUM			0x07
+
+/*--------------------------Define Parameters-------------------------------*/
+
+/*------------------------------Define structure----------------------------*/
+enum sw_chnl_cmd_id {
+	CmdID_End,
+	CmdID_SetTxPowerLevel,
+	CmdID_BBRegWrite10,
+	CmdID_WritePortUlong,
+	CmdID_WritePortUshort,
+	CmdID_WritePortUchar,
+	CmdID_RF_WriteReg,
+};
+
+/* 1. Switch channel related */
+struct sw_chnl_cmd {
+	enum sw_chnl_cmd_id CmdID;
+	u32 Para1;
+	u32 Para2;
+	u32 msDelay;
+};
+
+enum hw90_block {
+	HW90_BLOCK_MAC = 0,
+	HW90_BLOCK_PHY0 = 1,
+	HW90_BLOCK_PHY1 = 2,
+	HW90_BLOCK_RF = 3,
+	HW90_BLOCK_MAXIMUM = 4, /*  Never use this */
+};
+
+enum rf_radio_path {
+	RF_PATH_A = 0,			/* Radio Path A */
+	RF_PATH_B = 1,			/* Radio Path B */
+	RF_PATH_C = 2,			/* Radio Path C */
+	RF_PATH_D = 3,			/* Radio Path D */
+};
+
+#define MAX_PG_GROUP 13
+
+#define	RF_PATH_MAX			3
+#define		MAX_TX_COUNT		4 /* path numbers */
+
+#define CHANNEL_MAX_NUMBER		14	/*  14 is the max chnl number */
+#define MAX_CHNL_GROUP_24G		6	/*  ch1~2, ch3~5, ch6~8,
+						 *ch9~11, ch12~13, CH 14
+						 * total three groups */
+#define CHANNEL_GROUP_MAX_88E		6
+
+enum wireless_mode {
+	WIRELESS_MODE_UNKNOWN = 0x00,
+	WIRELESS_MODE_A			= BIT2,
+	WIRELESS_MODE_B			= BIT0,
+	WIRELESS_MODE_G			= BIT1,
+	WIRELESS_MODE_AUTO		= BIT5,
+	WIRELESS_MODE_N_24G		= BIT3,
+	WIRELESS_MODE_N_5G		= BIT4,
+	WIRELESS_MODE_AC		= BIT6
+};
+
+enum phy_rate_tx_offset_area {
+	RA_OFFSET_LEGACY_OFDM1,
+	RA_OFFSET_LEGACY_OFDM2,
+	RA_OFFSET_HT_OFDM1,
+	RA_OFFSET_HT_OFDM2,
+	RA_OFFSET_HT_OFDM3,
+	RA_OFFSET_HT_OFDM4,
+	RA_OFFSET_HT_CCK,
+};
+
+/* BB/RF related */
+enum RF_TYPE_8190P {
+	RF_TYPE_MIN,		/*  0 */
+	RF_8225 = 1,		/*  1 11b/g RF for verification only */
+	RF_8256 = 2,		/*  2 11b/g/n */
+	RF_8258 = 3,		/*  3 11a/b/g/n RF */
+	RF_6052 = 4,		/*  4 11b/g/n RF */
+	/*  TODO: We should remove this psudo PHY RF after we get new RF. */
+	RF_PSEUDO_11N = 5,	/*  5, It is a temporality RF. */
+};
+
+struct bb_reg_def {
+	u32 rfintfs;		/*  set software control: */
+				/*	0x870~0x877[8 bytes] */
+	u32 rfintfi;		/*  readback data: */
+				/*	0x8e0~0x8e7[8 bytes] */
+	u32 rfintfo;		/*  output data: */
+				/*	0x860~0x86f [16 bytes] */
+	u32 rfintfe;		/*  output enable: */
+				/*	0x860~0x86f [16 bytes] */
+	u32 rf3wireOffset;	/*  LSSI data: */
+				/*	0x840~0x84f [16 bytes] */
+	u32 rfLSSI_Select;	/*  BB Band Select: */
+				/*	0x878~0x87f [8 bytes] */
+	u32 rfTxGainStage;	/*  Tx gain stage: */
+				/*	0x80c~0x80f [4 bytes] */
+	u32 rfHSSIPara1;	/*  wire parameter control1 : */
+				/*	0x820~0x823,0x828~0x82b,
+				 *	0x830~0x833, 0x838~0x83b [16 bytes] */
+	u32 rfHSSIPara2;	/*  wire parameter control2 : */
+				/*	0x824~0x827,0x82c~0x82f, 0x834~0x837,
+				 *	0x83c~0x83f [16 bytes] */
+	u32 rfSwitchControl;	/* Tx Rx antenna control : */
+				/*	0x858~0x85f [16 bytes] */
+	u32 rfAGCControl1;	/* AGC parameter control1 : */
+				/*	0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63,
+				 * 0xc68~0xc6b [16 bytes] */
+	u32 rfAGCControl2;	/* AGC parameter control2 : */
+				/*	0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67,
+				 *	0xc6c~0xc6f [16 bytes] */
+	u32 rfRxIQImbalance;	/* OFDM Rx IQ imbalance matrix : */
+				/*	0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27,
+				 *	0xc2c~0xc2f [16 bytes] */
+	u32 rfRxAFE;		/* Rx IQ DC ofset and Rx digital filter,
+				 * Rx DC notch filter : */
+				/*	0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23,
+				 *	0xc28~0xc2b [16 bytes] */
+	u32 rfTxIQImbalance;	/* OFDM Tx IQ imbalance matrix */
+				/*	0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93,
+				 *	 0xc98~0xc9b [16 bytes] */
+	u32 rfTxAFE;		/* Tx IQ DC Offset and Tx DFIR type */
+				/*	0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97,
+				 *	0xc9c~0xc9f [16 bytes] */
+	u32 rfLSSIReadBack;	/* LSSI RF readback data SI mode */
+				/*	0x8a0~0x8af [16 bytes] */
+	u32 rfLSSIReadBackPi;	/* LSSI RF readback data PI mode 0x8b8-8bc for
+				 * Path A and B */
+};
+
+struct ant_sel_ofdm {
+	u32 r_tx_antenna:4;
+	u32 r_ant_l:4;
+	u32 r_ant_non_ht:4;
+	u32 r_ant_ht1:4;
+	u32 r_ant_ht2:4;
+	u32 r_ant_ht_s1:4;
+	u32 r_ant_non_ht_s1:4;
+	u32 OFDM_TXSC:2;
+	u32 reserved:2;
+};
+
+struct ant_sel_cck {
+	u8 r_cckrx_enable_2:2;
+	u8 r_cckrx_enable:2;
+	u8 r_ccktx_enable:4;
+};
+
+/*------------------------------Define structure----------------------------*/
+
+/*------------------------Export global variable----------------------------*/
+/*------------------------Export global variable----------------------------*/
+
+/*------------------------Export Marco Definition---------------------------*/
+/*------------------------Export Marco Definition---------------------------*/
+
+/*--------------------------Exported Function prototype---------------------*/
+/*  */
+/*  BB and RF register read/write */
+/*  */
+u32 rtl8188e_PHY_QueryBBReg(struct adapter *adapter, u32 regaddr, u32 mask);
+void rtl8188e_PHY_SetBBReg(struct adapter *Adapter, u32 RegAddr,
+			   u32 mask, u32 data);
+u32 rtl8188e_PHY_QueryRFReg(struct adapter *adapter, enum rf_radio_path rfpath,
+			    u32 regaddr, u32 mask);
+void rtl8188e_PHY_SetRFReg(struct adapter *adapter, enum rf_radio_path rfpath,
+			   u32 regaddr, u32 mask, u32 data);
+
+/*  Initialization related function */
+/* MAC/BB/RF HAL config */
+int PHY_MACConfig8188E(struct adapter *adapter);
+int PHY_BBConfig8188E(struct adapter *adapter);
+int PHY_RFConfig8188E(struct adapter *adapter);
+
+/* RF config */
+int rtl8188e_PHY_ConfigRFWithParaFile(struct adapter *adapter, u8 *filename,
+				      enum rf_radio_path rfpath);
+int rtl8188e_PHY_ConfigRFWithHeaderFile(struct adapter *adapter,
+					enum rf_radio_path rfpath);
+
+/* Read initi reg value for tx power setting. */
+void rtl8192c_PHY_GetHWRegOriginalValue(struct adapter *adapter);
+
+/*  BB TX Power R/W */
+void PHY_GetTxPowerLevel8188E(struct adapter *adapter, u32 *powerlevel);
+void PHY_SetTxPowerLevel8188E(struct adapter *adapter, u8 channel);
+bool PHY_UpdateTxPowerDbm8188E(struct adapter *adapter, int power);
+
+void PHY_ScanOperationBackup8188E(struct adapter *Adapter, u8 Operation);
+
+/*  Switch bandwidth for 8192S */
+void PHY_SetBWMode8188E(struct adapter *adapter,
+			enum ht_channel_width chnlwidth, unsigned char offset);
+
+/*  channel switch related funciton */
+void PHY_SwChnl8188E(struct adapter *adapter, u8 channel);
+/*  Call after initialization */
+void ChkFwCmdIoDone(struct adapter *adapter);
+
+/*  BB/MAC/RF other monitor API */
+void PHY_SetRFPathSwitch_8188E(struct adapter *adapter,	bool main);
+
+void PHY_SwitchEphyParameter(struct adapter *adapter);
+
+void PHY_EnableHostClkReq(struct adapter *adapter);
+
+bool SetAntennaConfig92C(struct adapter *adapter, u8 defaultant);
+
+void storePwrIndexDiffRateOffset(struct adapter *adapter, u32 regaddr,
+				 u32 mask, u32 data);
+/*--------------------------Exported Function prototype---------------------*/
+
+#define PHY_QueryBBReg(adapt, regaddr, mask)			\
+	 rtl8188e_PHY_QueryBBReg((adapt), (regaddr), (mask))
+#define PHY_SetBBReg(adapt, regaddr, bitmask, data)		\
+	 rtl8188e_PHY_SetBBReg((adapt), (regaddr), (bitmask), (data))
+#define PHY_QueryRFReg(adapt, rfpath, regaddr, bitmask)	\
+	rtl8188e_PHY_QueryRFReg((adapt), (rfpath), (regaddr), (bitmask))
+#define PHY_SetRFReg(adapt, rfpath, regaddr, bitmask, data)	\
+	rtl8188e_PHY_SetRFReg((adapt), (rfpath), (regaddr), (bitmask), (data))
+
+#define PHY_SetMacReg	PHY_SetBBReg
+
+#define	SIC_HW_SUPPORT			0
+
+#define	SIC_MAX_POLL_CNT		5
+
+#define	SIC_CMD_READY			0
+#define	SIC_CMD_WRITE			1
+#define	SIC_CMD_READ			2
+
+#define	SIC_CMD_REG			0x1EB		/*  1byte */
+#define	SIC_ADDR_REG			0x1E8		/*  1b9~1ba, 2 bytes */
+#define	SIC_DATA_REG			0x1EC		/*  1bc~1bf */
+
+#endif	/*  __INC_HAL8192CPHYCFG_H */