Merge pull request #13412 from mikaleppanen/wisun_radius_conf

Add support for RADIUS configuration options to Wi-SUN

features/nanostack/mbed-mesh-api/mbed-mesh-api/WisunBorderRouter.h

@@ -60,7 +60,7 @@ class WisunBorderRouter {
     /** Create WisunBorderRouter
      *
      * */
-    WisunBorderRouter() { }
+    WisunBorderRouter();
 
     /**
      * \brief Start Wi-SUN Border Router
@@ -209,9 +209,65 @@ class WisunBorderRouter {
      * */
     int routing_table_get(ws_br_route_info_t *table_ptr, uint16_t table_len);
 
+    /**
+     * \brief Set Wi-SUN RADIUS server IPv6 address.
+     *
+     * Function sets external RADIUS server IPv6 address to Border Router. Setting the address enables
+     * external RADIUS server interface on Border Router. To disable external RADIUS server interface,
+     * call the function with address set to NULL. The RADIUS shared secret must be set before address
+     * is set using set_radius_shared_secret() call.
+     *
+     * \param address Pointer to IPv6 address string or NULL to disable RADIUS. Address string format is e.g. 2001:1234::1 and it is NUL terminated.
+     * \return MESH_ERROR_NONE on success.
+     * \return MESH_ERROR_UNKNOWN in case of failure.
+     * */
+    mesh_error_t set_radius_server_ipv6_address(const char *address);
+
+    /**
+     * \brief Get Wi-SUN RADIUS server IPv6 address.
+     *
+     * Function gets external RADIUS server IPv6 address from Border Router.
+     *
+     * \param address Pointer to buffer where to write IPv6 address string. Must have space at least for 39 characters and NUL terminator.
+     * \return MESH_ERROR_NONE on success.
+     * \return error value in case of failure, e.g. if address has not been set to Border Router.
+     * */
+    mesh_error_t get_radius_server_ipv6_address(char *address);
+
+    /**
+     * \brief Set Wi-SUN RADIUS shared secret.
+     *
+     * Function sets RADIUS shared secret to Border Router. Shared secret may be an ASCII string. Check
+     * the format and length constraints for the shared secret from the documentation of RADIUS server you
+     * are connecting to.
+     *
+     * \param shared_secret_len The length of the shared secret in bytes.
+     * \param shared_secret Pointer to shared secret. Can be 8-bit ASCII string or byte array. Is not NUL terminated.
+     * \return MESH_ERROR_NONE on success.
+     * \return error value in case of failure.
+     * */
+    mesh_error_t set_radius_shared_secret(uint16_t shared_secret_len, const uint8_t *shared_secret);
+
+    /**
+     * \brief Get Wi-SUN RADIUS shared secret.
+     *
+     * Function gets RADIUS shared secret from Border Router.
+     *
+     * \param shared_secret_len On function call, is the size of the shared secret write buffer in bytes, on return is the shared secret length in bytes.
+     * \param shared_secret Pointer to buffer where to write shared secret or NULL. At maximum, bytes set by the length parameter are written. If NULL only buffer length is returned.
+     * \return MESH_ERROR_NONE on success.
+     * \return error value in case of failure.
+     * */
+    mesh_error_t get_radius_shared_secret(uint16_t *shared_secret_len, uint8_t *shared_secret);
+
 private:
+    mesh_error_t configure();
+    mesh_error_t apply_configuration(int8_t mesh_if_id);
+    mesh_error_t set_bbr_radius_address(void);
+    char _radius_ipv6_addr[40];
     int8_t _mesh_if_id = -1;
-
+    bool _radius_ipv6_addr_set = false;
+    bool _configured = false;
 };
 
 #endif

features/nanostack/mbed-mesh-api/mbed_lib.json

@@ -195,6 +195,18 @@
         "own-certificate-key-len": {
             "help": "Own certificate's key length; optional for PEM format, must be defined for DER format",
             "value": null
+        },
+        "radius-server-ipv6-address": {
+            "help": "RADIUS Server IPv6 address in string format (e.g. \"2001:1234::1\")",
+            "value": null
+        },
+        "radius-shared-secret": {
+            "help": "RADIUS shared secret; ASCII string (e.g. \"radiuspassword\") or sequence of bytes (e.g. 0x01, 0x02, 0x03, 0x04, 0x05)",
+            "value": null
+        },
+        "radius-shared-secret-len": {
+            "help": "RADIUS shared secret length; If length is not defined, strlen() is used to determine RADIUS shared secret length",
+            "value": null
         }        
     },
     "target_overrides": {

features/nanostack/mbed-mesh-api/source/WisunBorderRouter.cpp

@@ -19,13 +19,21 @@
 #include "WisunBorderRouter.h"
 #include "MeshInterfaceNanostack.h"
 #include "net_interface.h"
+#include "ip6string.h"
 
 extern "C" {
 #include "ws_bbr_api.h"
 }
 
 #define TRACE_GROUP "WSBR"
 
+
+WisunBorderRouter::WisunBorderRouter()
+{
+    // Apply mbed configuration to Wi-SUN BBR
+    configure();
+}
+
 mesh_error_t WisunBorderRouter::start(NetworkInterface *mesh_if, NetworkInterface *backbone_if)
 {
     if (mesh_if == NULL || backbone_if == NULL) {
@@ -53,6 +61,8 @@ mesh_error_t WisunBorderRouter::start(NetworkInterface *mesh_if, NetworkInterfac
         return MESH_ERROR_UNKNOWN;
     }
 
+    apply_configuration(mesh_if_id);
+
     int ret = ws_bbr_start(mesh_if_id, backbone_if_id);
     if (ret < 0) {
         return MESH_ERROR_UNKNOWN;
@@ -76,6 +86,8 @@ mesh_error_t WisunBorderRouter::start(NetworkInterface *mesh_if, OnboardNetworkS
         return MESH_ERROR_UNKNOWN;
     }
 
+    apply_configuration(mesh_if_id);
+
     int ret = ws_bbr_start(mesh_if_id, backbone_if_id);
     if (ret < 0) {
         return MESH_ERROR_UNKNOWN;
@@ -95,6 +107,55 @@ void WisunBorderRouter::stop()
     _mesh_if_id = -1;
 }
 
+mesh_error_t WisunBorderRouter::configure()
+{
+#if defined(MBED_CONF_MBED_MESH_API_RADIUS_SHARED_SECRET) || defined(MBED_CONF_MBED_MESH_API_RADIUS_SERVER_IPV6_ADDRESS)
+    mesh_error_t status;
+#endif
+
+    if (_configured) {
+        // Already configured
+        return MESH_ERROR_NONE;
+    }
+
+    _configured = true;
+
+#ifdef MBED_CONF_MBED_MESH_API_RADIUS_SHARED_SECRET
+    const char radius_shared_secret[] = {MBED_CONF_MBED_MESH_API_RADIUS_SHARED_SECRET};
+#ifdef MBED_CONF_MBED_MESH_API_RADIUS_SHARED_SECRET_LEN
+    const uint16_t radius_shared_secret_len = MBED_CONF_MBED_MESH_API_RADIUS_SHARED_SECRET_LEN;
+#else
+    uint16_t radius_shared_secret_len = strlen(radius_shared_secret);
+#endif
+    status = set_radius_shared_secret(radius_shared_secret_len, (uint8_t *) radius_shared_secret);
+    if (status != MESH_ERROR_NONE) {
+        tr_error("Failed to set RADIUS shared secret!");
+        return status;
+    }
+#endif
+
+#ifdef MBED_CONF_MBED_MESH_API_RADIUS_SERVER_IPV6_ADDRESS
+    const char radius_server_ipv6_addr[] = {MBED_CONF_MBED_MESH_API_RADIUS_SERVER_IPV6_ADDRESS};
+    status = set_radius_server_ipv6_address(radius_server_ipv6_addr);
+    if (status != MESH_ERROR_NONE) {
+        tr_error("Failed to set RADIUS server IPv6 address!");
+        return status;
+    }
+#endif
+
+    return MESH_ERROR_NONE;
+}
+
+mesh_error_t WisunBorderRouter::apply_configuration(int8_t mesh_if_id)
+{
+    mesh_error_t status = set_bbr_radius_address();
+    if (status != MESH_ERROR_NONE) {
+        tr_error("Failed to apply RADIUS server IPv6 address!");
+        return MESH_ERROR_PARAM;
+    }
+    return MESH_ERROR_NONE;
+}
+
 mesh_error_t WisunBorderRouter::set_rpl_parameters(uint8_t dio_interval_min, uint8_t dio_interval_doublings, uint8_t dio_redundancy_constant)
 {
     int status = ws_bbr_rpl_parameters_set(_mesh_if_id, dio_interval_min, dio_interval_doublings, dio_redundancy_constant);
@@ -188,3 +249,78 @@ int WisunBorderRouter::routing_table_get(ws_br_route_info_t *table_ptr, uint16_t
 
     return ws_bbr_routing_table_get(_mesh_if_id, (bbr_route_info_t *)table_ptr, table_len);
 }
+
+mesh_error_t WisunBorderRouter::set_radius_server_ipv6_address(const char *address)
+{
+    if (address) {
+        uint8_t ipv6_addr[16];
+        if (!stoip6(address, strlen(address), ipv6_addr)) {
+            return MESH_ERROR_PARAM;
+        }
+        // Stored address (returned by get) is in the format given by user of the interface
+        strcpy(_radius_ipv6_addr, address);
+        _radius_ipv6_addr_set = true;
+    } else {
+        _radius_ipv6_addr_set = false;
+    }
+
+    return set_bbr_radius_address();
+}
+
+mesh_error_t WisunBorderRouter::get_radius_server_ipv6_address(char *address)
+{
+    if (!_radius_ipv6_addr_set) {
+        return MESH_ERROR_UNKNOWN;
+    }
+    strcpy(address, _radius_ipv6_addr);
+
+    return MESH_ERROR_NONE;
+}
+
+mesh_error_t WisunBorderRouter::set_bbr_radius_address(void)
+{
+    int status;
+
+    if (_radius_ipv6_addr_set) {
+        uint8_t ipv6_addr[16];
+        if (!stoip6(_radius_ipv6_addr, strlen(_radius_ipv6_addr), ipv6_addr)) {
+            return MESH_ERROR_PARAM;
+        }
+        status = ws_bbr_radius_address_set(_mesh_if_id, ipv6_addr);
+    } else {
+        status = ws_bbr_radius_address_set(_mesh_if_id, NULL);
+    }
+    if (status != 0) {
+        return MESH_ERROR_UNKNOWN;
+    }
+
+    return MESH_ERROR_NONE;
+}
+
+mesh_error_t WisunBorderRouter::set_radius_shared_secret(uint16_t shared_secret_len, const uint8_t *shared_secret)
+{
+    if (shared_secret_len == 0 || !shared_secret) {
+        return MESH_ERROR_PARAM;
+    }
+
+    int status = ws_bbr_radius_shared_secret_set(_mesh_if_id, shared_secret_len, shared_secret);
+    if (status != 0) {
+        return MESH_ERROR_UNKNOWN;
+    }
+
+    return MESH_ERROR_NONE;
+}
+
+mesh_error_t WisunBorderRouter::get_radius_shared_secret(uint16_t *shared_secret_len, uint8_t *shared_secret)
+{
+    if (shared_secret_len == NULL) {
+        return MESH_ERROR_PARAM;
+    }
+
+    int status = ws_bbr_radius_shared_secret_get(_mesh_if_id, shared_secret_len, shared_secret);
+    if (status != 0) {
+        return MESH_ERROR_UNKNOWN;
+    }
+
+    return MESH_ERROR_NONE;
+}

features/nanostack/mbed-mesh-api/source/WisunInterface.cpp

@@ -71,7 +71,7 @@ nsapi_error_t WisunInterface::do_initialize()
 
 nsapi_error_t WisunInterface::configure()
 {
-    int status;
+    mesh_error_t status;
 
     if (_configured) {
         // Already configured
@@ -82,7 +82,7 @@ nsapi_error_t WisunInterface::configure()
 #ifdef MBED_CONF_MBED_MESH_API_WISUN_NETWORK_NAME
     char network_name[] = {MBED_CONF_MBED_MESH_API_WISUN_NETWORK_NAME};
     status = set_network_name((char *) &network_name);
-    if (status < 0) {
+    if (status != MESH_ERROR_NONE) {
         tr_error("Failed to set network name!");
         return NSAPI_ERROR_PARAMETER;
     }
@@ -92,7 +92,7 @@ nsapi_error_t WisunInterface::configure()
     status = set_network_regulatory_domain(MBED_CONF_MBED_MESH_API_WISUN_REGULATORY_DOMAIN,
                                            MBED_CONF_MBED_MESH_API_WISUN_OPERATING_CLASS,
                                            MBED_CONF_MBED_MESH_API_WISUN_OPERATING_MODE);
-    if (status < 0) {
+    if (status != MESH_ERROR_NONE) {
         tr_error("Failed to set regulatory domain!");
         return NSAPI_ERROR_PARAMETER;
     }
@@ -102,7 +102,7 @@ nsapi_error_t WisunInterface::configure()
     status = set_unicast_channel_function(static_cast<mesh_channel_function_t>(MBED_CONF_MBED_MESH_API_WISUN_UC_CHANNEL_FUNCTION),
                                           MBED_CONF_MBED_MESH_API_WISUN_UC_FIXED_CHANNEL,
                                           MBED_CONF_MBED_MESH_API_WISUN_UC_DWELL_INTERVAL);
-    if (status < 0) {
+    if (status != MESH_ERROR_NONE) {
         tr_error("Failed to set unicast channel function configuration");
         return NSAPI_ERROR_PARAMETER;
     }
@@ -113,15 +113,15 @@ nsapi_error_t WisunInterface::configure()
                                             MBED_CONF_MBED_MESH_API_WISUN_BC_FIXED_CHANNEL,
                                             MBED_CONF_MBED_MESH_API_WISUN_BC_DWELL_INTERVAL,
                                             MBED_CONF_MBED_MESH_API_WISUN_BC_INTERVAL);
-    if (status < 0) {
+    if (status != MESH_ERROR_NONE) {
         tr_error("Failed to set broadcast channel function configuration");
         return NSAPI_ERROR_PARAMETER;
     }
 #endif
 
 #ifdef MBED_CONF_MBED_MESH_API_WISUN_NETWORK_SIZE
     status = set_network_size(MBED_CONF_MBED_MESH_API_WISUN_NETWORK_SIZE);
-    if (status < 0) {
+    if (status != MESH_ERROR_NONE) {
         tr_error("Failed to set network size");
         return NSAPI_ERROR_PARAMETER;
     }