New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
WeAct Blackpill F411CE target #15163
Changes from all commits
File filter
Filter by extension
Conversations
Jump to
Diff view
Diff view
There are no files selected for viewing
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,16 @@ | ||
# Copyright (c) 2020 ARM Limited. All rights reserved. | ||
# SPDX-License-Identifier: Apache-2.0 | ||
|
||
add_library(mbed-weact-blackpill-f411ce INTERFACE) | ||
|
||
target_sources(mbed-weact-blackpill-f411ce | ||
INTERFACE | ||
PeripheralPins.c | ||
) | ||
|
||
target_include_directories(mbed-weact-blackpill-f411ce | ||
INTERFACE | ||
. | ||
) | ||
|
||
target_link_libraries(mbed-weact-blackpill-f411ce INTERFACE mbed-stm32f411xe) |
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,139 @@ | ||
/* mbed Microcontroller Library | ||
******************************************************************************* | ||
* Copyright (c) 2014, STMicroelectronics | ||
* All rights reserved. | ||
* | ||
* Redistribution and use in source and binary forms, with or without | ||
* modification, are permitted provided that the following conditions are met: | ||
* | ||
* 1. Redistributions of source code must retain the above copyright notice, | ||
* this list of conditions and the following disclaimer. | ||
* 2. Redistributions in binary form must reproduce the above copyright notice, | ||
* this list of conditions and the following disclaimer in the documentation | ||
* and/or other materials provided with the distribution. | ||
* 3. Neither the name of STMicroelectronics nor the names of its contributors | ||
* may be used to endorse or promote products derived from this software | ||
* without specific prior written permission. | ||
* | ||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | ||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | ||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | ||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | ||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | ||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | ||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | ||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | ||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | ||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | ||
******************************************************************************* | ||
*/ | ||
|
||
#include "PeripheralPins.h" | ||
|
||
// ===== | ||
// Note: Commented lines are alternative possibilities which are not used per default. | ||
// If you change them, you will have also to modify the corresponding xxx_api.c file | ||
// for pwmout, analogin, analogout, ... | ||
// ===== | ||
|
||
//*** ADC *** | ||
|
||
const PinMap PinMap_ADC[] = { | ||
{PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0 | ||
{PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 | ||
{PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 | ||
{PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 | ||
{PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 | ||
{PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 | ||
{PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 | ||
{PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 | ||
{PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 | ||
{PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9 | ||
{PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 | ||
{NC, NC, 0} | ||
}; | ||
|
||
const PinMap PinMap_ADC_Internal[] = { | ||
{ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // See in analogin_api.c the correct ADC channel used | ||
{ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // See in analogin_api.c the correct ADC channel used | ||
{ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // See in analogin_api.c the correct ADC channel used | ||
{NC, NC, 0} | ||
}; | ||
|
||
//*** I2C *** | ||
|
||
const PinMap PinMap_I2C_SDA[] = { | ||
{PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, | ||
{NC, NC, 0} | ||
}; | ||
|
||
const PinMap PinMap_I2C_SCL[] = { | ||
{PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, | ||
{NC, NC, 0} | ||
}; | ||
|
||
//*** PWM *** | ||
|
||
// TIM5 cannot be used because already used by the us_ticker | ||
const PinMap PinMap_PWM[] = { | ||
{PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 | ||
{PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 | ||
{PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 | ||
{PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 | ||
{PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 | ||
{PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 | ||
{PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 | ||
{PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 | ||
|
||
{PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N | ||
{PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N | ||
|
||
{PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 | ||
|
||
{NC, NC, 0} | ||
}; | ||
|
||
//*** SERIAL *** | ||
|
||
const PinMap PinMap_UART_TX[] = { | ||
{PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, | ||
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, | ||
{PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, | ||
{NC, NC, 0} | ||
}; | ||
|
||
const PinMap PinMap_UART_RX[] = { | ||
{PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, | ||
{PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, | ||
{PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, | ||
{NC, NC, 0} | ||
}; | ||
|
||
//*** SPI *** | ||
|
||
const PinMap PinMap_SPI_MOSI[] = { | ||
{PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, | ||
{PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, | ||
{PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, | ||
{NC, NC, 0} | ||
}; | ||
|
||
const PinMap PinMap_SPI_MISO[] = { | ||
{PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, | ||
{PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, | ||
{PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, | ||
{NC, NC, 0} | ||
}; | ||
|
||
const PinMap PinMap_SPI_SCLK[] = { | ||
{PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, | ||
{PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, | ||
{PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, | ||
{NC, NC, 0} | ||
}; | ||
|
||
const PinMap PinMap_SPI_SSEL[] = { | ||
{PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, | ||
{PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Warning: also on SCLK | ||
{NC, NC, 0} | ||
}; |
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,178 @@ | ||
/* mbed Microcontroller Library | ||
******************************************************************************* | ||
* Copyright (c) 2014, STMicroelectronics | ||
* All rights reserved. | ||
* | ||
* Redistribution and use in source and binary forms, with or without | ||
* modification, are permitted provided that the following conditions are met: | ||
* | ||
* 1. Redistributions of source code must retain the above copyright notice, | ||
* this list of conditions and the following disclaimer. | ||
* 2. Redistributions in binary form must reproduce the above copyright notice, | ||
* this list of conditions and the following disclaimer in the documentation | ||
* and/or other materials provided with the distribution. | ||
* 3. Neither the name of STMicroelectronics nor the names of its contributors | ||
* may be used to endorse or promote products derived from this software | ||
* without specific prior written permission. | ||
* | ||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | ||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | ||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | ||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | ||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | ||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | ||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | ||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | ||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | ||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | ||
******************************************************************************* | ||
*/ | ||
|
||
/* MBED TARGET LIST: MTS_MDOT_F411RE */ | ||
There was a problem hiding this comment. Choose a reason for hiding this commentThe reason will be displayed to describe this comment to others. Learn more. Minor comment, but wrong info |
||
|
||
#ifndef MBED_PINNAMES_H | ||
#define MBED_PINNAMES_H | ||
|
||
#include "cmsis.h" | ||
#include "PinNamesTypes.h" | ||
|
||
#ifdef __cplusplus | ||
extern "C" { | ||
#endif | ||
|
||
typedef enum { | ||
PA_0 = 0x00, | ||
PA_1 = 0x01, | ||
PA_2 = 0x02, | ||
PA_3 = 0x03, | ||
PA_4 = 0x04, | ||
PA_5 = 0x05, | ||
PA_6 = 0x06, | ||
PA_7 = 0x07, | ||
PA_8 = 0x08, | ||
PA_9 = 0x09, | ||
PA_10 = 0x0A, | ||
PA_11 = 0x0B, | ||
PA_12 = 0x0C, | ||
PA_13 = 0x0D, | ||
PA_14 = 0x0E, | ||
PA_15 = 0x0F, | ||
|
||
PB_0 = 0x10, | ||
PB_1 = 0x11, | ||
PB_2 = 0x12, | ||
PB_3 = 0x13, | ||
PB_4 = 0x14, | ||
PB_5 = 0x15, | ||
PB_6 = 0x16, | ||
PB_7 = 0x17, | ||
PB_8 = 0x18, | ||
PB_9 = 0x19, | ||
PB_10 = 0x1A, | ||
PB_11 = 0x1B, | ||
PB_12 = 0x1C, | ||
PB_13 = 0x1D, | ||
PB_14 = 0x1E, | ||
PB_15 = 0x1F, | ||
|
||
PC_0 = 0x20, | ||
PC_1 = 0x21, | ||
PC_2 = 0x22, | ||
PC_3 = 0x23, | ||
PC_4 = 0x24, | ||
PC_5 = 0x25, | ||
PC_6 = 0x26, | ||
PC_7 = 0x27, | ||
PC_8 = 0x28, | ||
PC_9 = 0x29, | ||
PC_10 = 0x2A, | ||
PC_11 = 0x2B, | ||
PC_12 = 0x2C, | ||
PC_13 = 0x2D, | ||
PC_14 = 0x2E, | ||
PC_15 = 0x2F, | ||
|
||
// ADC internal channels | ||
ADC_TEMP = 0xF0, | ||
ADC_VREF = 0xF1, | ||
ADC_VBAT = 0xF2, | ||
|
||
// DB_TX/RX, USB port on UDK board | ||
DB_TX = PA_11, | ||
DB_RX = PA_12, | ||
CONSOLE_TX = PA_11, | ||
CONSOLE_RX = PA_12, | ||
|
||
// SPI flash | ||
SPI3_MOSI = PA_7, | ||
SPI3_MISO = PA_6, | ||
SPI3_SCK = PA_5, | ||
SPI3_CS = PA_4, | ||
|
||
// Debug interface | ||
DEBUG_DIO = PA_13, | ||
DEBUG_SCK = PA_14, | ||
|
||
// Board pins | ||
A0 = PA_0, | ||
KEY = PA_0, | ||
A1 = PA_1, | ||
A2 = PA_2, | ||
A3 = PA_3, | ||
A4 = PA_4, | ||
A5 = PA_5, | ||
A6 = PA_6, | ||
A7 = PA_7, | ||
A8 = PA_8, | ||
A9 = PA_9, | ||
A10 = PA_10, | ||
A11 = PA_11, | ||
A12 = PA_12, | ||
// A13 = PA_13, | ||
DIO = PA_13, | ||
// A14 = PA_14, | ||
SCK = PA_14, | ||
A15 = PA_15, | ||
B0 = PB_0, | ||
B1 = PB_1, | ||
B2 = PB_2, | ||
B3 = PB_3, | ||
B4 = PB_4, | ||
B5 = PB_5, | ||
B6 = PB_6, | ||
B7 = PB_7, | ||
B8 = PB_8, | ||
B9 = PB_9, | ||
B10 = PB_10, | ||
B11 = PB_11, | ||
B12 = PB_12, | ||
B13 = PB_13, | ||
B14 = PB_14, | ||
B15 = PB_15, | ||
C13 = PC_13, | ||
C14 = PC_14, | ||
C15 = PC_15, | ||
|
||
// Not connected | ||
NC = (int)0xFFFFFFFF | ||
} PinName; | ||
|
||
#if defined(MBED_CONF_TARGET_STDIO_UART_TX) | ||
#define STDIO_UART_TX MBED_CONF_TARGET_STDIO_UART_TX | ||
#else | ||
#define STDIO_UART_TX PA_9 | ||
#endif | ||
#if defined(MBED_CONF_TARGET_STDIO_UART_RX) | ||
#define STDIO_UART_RX MBED_CONF_TARGET_STDIO_UART_RX | ||
#else | ||
#define STDIO_UART_RX PA_10 | ||
#endif | ||
Comment on lines
+160
to
+169
There was a problem hiding this comment. Choose a reason for hiding this commentThe reason will be displayed to describe this comment to others. Learn more. To remove I think ? |
||
|
||
// Standardized LED and button names | ||
#define LED1 PC_13 // needed for mbed to build tests | ||
There was a problem hiding this comment. Choose a reason for hiding this commentThe reason will be displayed to describe this comment to others. Learn more. Remove it if there is no LED ? |
||
|
||
#ifdef __cplusplus | ||
} | ||
#endif | ||
|
||
#endif |
Original file line number | Diff line number | Diff line change |
---|---|---|
|
@@ -1902,6 +1902,24 @@ | |
"0320" | ||
] | ||
}, | ||
"WEACT_BLACKPILL_F411CE": { | ||
"inherits": [ | ||
"MCU_STM32F411xE" | ||
], | ||
"macros_add": [ | ||
"HSE_VALUE=25000000" | ||
], | ||
"overrides": { | ||
"clock_source": "USE_PLL_HSI" | ||
}, | ||
"device_has_remove": [ | ||
"SERIAL_FC" | ||
], | ||
"device_name": "STM32F411CEUx", | ||
"detect_code": [ | ||
"1234" | ||
] | ||
Comment on lines
+1919
to
+1921
There was a problem hiding this comment. Choose a reason for hiding this commentThe reason will be displayed to describe this comment to others. Learn more. To remove |
||
}, | ||
"MCU_STM32F412xG": { | ||
"inherits": [ | ||
"MCU_STM32F4" | ||
|
There was a problem hiding this comment.
Choose a reason for hiding this comment
The reason will be displayed to describe this comment to others. Learn more.
Not sure that PC1 is available on STM32F411CE...
NB: you should use latest script
https://github.com/ARMmbed/mbed-os/tree/master/targets/TARGET_STM#board-specific-files-pinmap