<<<<<<< HEAD

Control-Power-Using-Haarcascade-Classifier

The purpose in this project, i want to control power in the room with human detection. If any human in the room the power will ON, but if not any human in the room the power will OFF.

I make the project with EMGUCV and C#. I also make the Graphic User Interface (GUI) to facilitate the user.

Control Power Using Haarcascade Classifier

The purpose in this project, i want to control power in the room with human detection. If any human in the room the power will ON, but if not any human in the room the power will OFF.

I make the project with EMGUCV and C#. I also make the Graphic User Interface (GUI) to facilitate the user.

How To Use

1. Put the Opencv file in Project Folder : https://drive.google.com/file/d/1KQ-S4DhkyqJS0snmQQ4_kgCZQWTAUYlH/view?usp=sharing
2. Put the this file in out Project Folder :https://drive.google.com/file/d/1g6X1dFA2LelEZRG9BwGOUH_uSfp6zS5t/view?usp=sharing
3. Connect arduino in your PC ( Check the port, if the port as different change the port like the port arduino
4. Connect the webcam in your pc
5. Run Program

The User Interface Project

The Image of the Hardware Project

a6c46bf0d11c8a36e67cdb70386e64b1048dd301