Elevator-Controller

A generic Arduino controller that manages the operations of an elevator.

Dependencies

• Proteus (for simulation)
• PlatformIO 5.1.1+ (for build/test)
• gcc/g++ 8.3.0+ (for local test)
• gnu-make 4.2.1 (for build)

$ sudo apt update &&
  sudo apt install -y g++ gcc python3-pip make &&
  sudo python3 -m pip install platformio &&
  pio update

VSCode Integration

You may install PlatformIO IDE extension for VSCode. Make sure to disable/uninstall Arduino extension before it, if you have it enabled.

Simulation

• Open proteus project file .proteus\elevator-controller.pdsprj using Proteus 8.6.
• Load the hex file ./.pio/build/default/firmware.hex which is generated after building into the Arduino Uno component.
• Download the ultrasonic sensor library from the following link, follow the instructions to place its library files in Proteus's library directory and load its hex file to the ultrasonic sensor: https://www.theengineeringprojects.com/2015/02/ultrasonic-sensor-library-proteus.html
• Run the simulation and have fun.

Make Targets

Build

make or make build

Test

make test

Clean

make clean