This is the short guide about how to recompile/enable --enable-ssl option in a Squid caching proxy server. The --enable-ssl option turned off by default, to be able to use SslBump feature we have to turn it on. To my own surprise Squid was compiled not only without --enable-ssl flag, but also with GnuTLS due to GPL legal reasons.
Optionally enable:
- SARG to provide detailed usage statistics, https://sourceforge.net/projects/sarg/
- SquidClamAV to scan web traffic for viruses, https://squidclamav.darold.net/
First off, uncomment the deb-src in /etc/apt/source.list and do:
sudo apt updatethen, open a bash shell and:
mkdir squid-build
cd squid-build
sudo apt-get install openssl devscripts build-essential fakeroot libdbi-perl libssl-dev dpkg-dev
sudo apt-get build-dep squid
apt-get source squid
cd squid-4.6/Now change build script
nano debian/rulesFor the DEB_CONFIGURE_EXTRA_FLAGS flags:
- change
--with-gnutlsto--without-gnutls(disable GnuTLS) - add
--with-openssl(use OpenSSL instead of GnuTLS) - add
--enable-ssl - add
--enable-ssl-crtd - add
--disable-ipv6(optionally disable IPv6)
Now compile deb-packages using
debuild -us -ucIn case of an error on subsequent attempt
# commit non-relevant files
dpkg-source --commit
# or get rid of it
rm -f config.logcd ..
# list all produced packages
ls -la *.deb
# install only two relevant
sudo dpkg -i squid_4.6-1+deb10u4_armhf.deb squid-common_4.6-1+deb10u4_all.debCheck enabled flags with:
squid -v | grep sslPut updates on hold
sudo apt-mark hold squid squid-commonapt-get install openssl
mkdir -p /etc/squid/cert
cd /etc/squid/cert
openssl genrsa -out ca.key 2048
openssl req -x509 -new -nodes -sha256 -days 365 -key ca.key -out ca.pem -subj '/C=LV/ST=Latvia/O=IT/CN=Self-signed CA'
openssl x509 -in ca.pem -outform DER -out ca.der
openssl dhparam -outform PEM -out dhparam.pem 2048
chown -R proxy:proxy /etc/squid/cert
chmod 700 /etc/squid/certThe certificate generated at this step will be used to re-encrypt your HTTPS traffic, ca.pem file must be imported to your clients web-browser
/usr/lib/squid/security_file_certgen -c -s /var/spool/squid/ssl_db -M 4MB
chown -R proxy:proxy /var/spool/squid/ssl_db/Add the following block to the existing Squid configuration file at /etc/squid/squid.conf
acl intermediate_fetching transaction_initiator certificate-fetching
http_access allow intermediate_fetching
sslcrtd_program /usr/lib/squid/security_file_certgen -s /var/spool/squid/ssl_db -M 4MB
sslcrtd_children 8 startup=1 idle=1
# sslproxy_cert_error allow all
ssl_bump stare all
http_port 3129 tcpkeepalive=60,30,3 ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=4MB cert=/etc/squid/cert/ca.pem key=/etc/squid/cert/ca.key cipher=HIGH:MEDIUM:!LOW:!RC4:!SEED:!IDEA:!3DES:!MD5:!EXP:!PSK:!DSS options=NO_TLSv1,NO_SSLv3 tls-dh=prime256v1:/etc/squid/cert/dhparam.pem
You can instruct Squid to use only particular OpenSSL ciphers to connect to external web-sites, and between itself and proxy-users
tls_outgoing_options cipher=HIGH:MEDIUM:!RSA:!CAMELLIA:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS:!RC4:!SHA1:!SHA256:!SHA384:!SEED:!ADH options=NO_SSLv3 min-version=1.2
ssl_bump bump all
http_port 192.168.88.220:3129 tcpkeepalive=60,30,3 ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=4MB cert=/etc/squid/cert/ca.pem key=/etc/squid/cert/ca.key cipher=HIGH:MEDIUM:!RSA:!CAMELLIA:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS:!RC4:!SHA1:!SHA256:!SHA384:!SEED:!ADH options=NO_TLSv1,NO_TLSv1_1,NO_SSLv3 tls-dh=prime256v1:/etc/squid/cert/dhparam.pem
Click to see complete configuration
acl internal_icons urlpath_regex -i /squid-internal-static/icons/
http_access allow internal_icons
acl intermediate_fetching transaction_initiator certificate-fetching
http_access allow intermediate_fetching
sslcrtd_program /usr/lib/squid/security_file_certgen -s /var/spool/squid/ssl_db -M 4MB
sslcrtd_children 8 startup=1 idle=1
# sslproxy_cert_error allow all
ssl_bump stare all
# printf "squid:$(openssl passwd -crypt 'squid')\n" | sudo tee -a /etc/squid/passwd
# auth_param basic program /usr/lib/squid3/basic_ncsa_auth /etc/squid/passwd
# auth_param basic realm proxy
# auth_param basic credentialsttl 8 hours
# auth_param basic utf8 on
# auth_param basic casesensitive off
# acl authenticated proxy_auth REQUIRED
acl localnet src 0.0.0.1-0.255.255.255
acl localnet src 10.0.0.0/8
acl localnet src 100.64.0.0/10
acl localnet src 169.254.0.0/16
acl localnet src 172.16.0.0/12
acl localnet src 192.168.0.0/16
acl SSL_ports port 443
acl Safe_ports port 80
acl Safe_ports port 21
acl Safe_ports port 443
acl Safe_ports port 70
acl Safe_ports port 210
acl Safe_ports port 1025-65535
acl Safe_ports port 280
acl Safe_ports port 488
acl Safe_ports port 591
acl Safe_ports port 777
acl CONNECT method CONNECT
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
http_access allow localhost manager
http_access deny manager
snmp_access deny all
icp_access deny all
htcp_access deny all
http_access deny to_localhost
http_access allow localnet
http_access allow localhost
# http_access allow authenticated
http_access deny all
http_port 3128
http_port 3129 tcpkeepalive=60,30,3 ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=4MB cert=/etc/squid/cert/ca.pem key=/etc/squid/cert/ca.key cipher=HIGH:MEDIUM:!LOW:!RC4:!SEED:!IDEA:!3DES:!MD5:!EXP:!PSK:!DSS options=NO_TLSv1,NO_SSLv3 tls-dh=prime256v1:/etc/squid/cert/dhparam.pem
cache deny all
# access_log none
access_log daemon:/var/log/squid/access.log squid
cache_store_log none
cache_log /dev/null
via off
forwarded_for delete
follow_x_forwarded_for deny all
logfile_rotate 0
strip_query_terms off
shutdown_lifetime 2 seconds
memory_pools off
dns_v4_first on
visible_hostname raspberrypi
Restart
sudo systemctl restart squid.serviceSince we're not using intercept mode a client configuration is needed:
- Set HTTP proxy to point to Squid server ip address and port
3129 - Download
/etc/squid/cert/ca.pemcertificate and import it into the trust-store
In intercept mode few changes are needed (feel free to skip this step if you do not plan to use intercept mode):
Enable IP layer interception
http_port 3120 intercept
https_port 3130 intercept ssl-bump ...
iptables -t nat -A PREROUTING -i eth0 -s 192.168.55.0/24 ! -d 192.168.55.0/24 -p tcp -m tcp --dport 80 -j REDIRECT --to-port 3120
iptables -t nat -A PREROUTING -i eth0 -s 192.168.55.0/24 ! -d 192.168.55.0/24 -p tcp -m tcp --dport 443 -j REDIRECT --to-port 3130iptables -t nat -A OUTPUT -p tcp -m owner ! --uid-owner proxy --dport 80 -j REDIRECT --to-port 3120
iptables -t nat -A OUTPUT -p tcp -m owner ! --uid-owner proxy --dport 443 -j REDIRECT --to-port 3130tee -a /etc/sysctl.conf <<'EOF' >/dev/null
net.ipv4.ip_forward = 1
net.ipv4.conf.default.rp_filter = 0
net.ipv4.conf.default.accept_source_route = 0
EOF
sudo sysctl -p
Prepare passwords file
sudo touch /etc/squid/passwd
sudo chmod 644 /etc/squid/passwd
sudo htpasswd -c /etc/squid/passwd squidUncomment lines
auth_param basic program /usr/lib/squid3/basic_ncsa_auth /etc/squid/passwd
auth_param basic realm proxy
auth_param basic credentialsttl 8 hours
auth_param basic utf8 on
auth_param basic casesensitive off
acl authenticated proxy_auth REQUIRED
http_access allow authenticated
http_access deny all
# ssl_bump peek all
# ssl_bump splice all
# ssl_bump bump all
# acl step1 at_step SslBump1
# acl step2 at_step SslBump2
# acl step3 at_step SslBump3
# acl ssl_exclude_domains ssl::server_name "/etc/squid/ssl_exclude_domains.conf"
# acl ssl_exclude_ips dst "/etc/squid/ssl_exclude_ips.conf"
# ssl_bump splice localhost
# ssl_bump peek step1 all
# ssl_bump splice ssl_exclude_domains
# ssl_bump splice ssl_exclude_ips
# ssl_bump stare step2 all
# ssl_bump bump all
sudo apt-get install zlib1g-dev libgd-dev libbz2-dev liblzma-dev libpcre3-devcurl -fsSLO https://kumisystems.dl.sourceforge.net/project/sarg/sarg/sarg-2.4.0/sarg-2.4.0.tar.gz
tar -zxf sarg-2.4.0.tar.gz
cd sarg-2.4.0/
./configure --prefix /opt/sarg
make
sudo make installsudo usermod -a -G proxy www-data # allow to read squid logs
sudo cp sarg.conf /opt/sarg/etc/sarg.conf # check config file below
sudo /opt/sarg/bin/sarg -r
sudo crontab -e
Add new item
59 23 * * * sudo /opt/sarg/bin/sarg -f /opt/sarg/etc/sarg.conf
Click to see complete configuration file /opt/sarg/etc/sarg.conf
access_log /var/log/squid/access.log
output_dir /var/www/html/sarg
resolve_ip yes
user_ip yes
topuser_sort_field BYTES reverse
user_sort_field BYTES reverse
date_format e
lastlog 7
remove_temp_files yes
index yes
index_tree file
index_fields dirsize
overwrite_report yes
records_without_userid ip
use_comma no
topsites_num 10
topsites_sort_order CONNECT D
index_sort_order D
report_type topusers topsites sites_users users_sites date_time denied auth_failures site_user_time_date downloads user_agent
long_url yes
date_time_by bytes
charset Latin1
privacy no
show_successful_message yes
show_read_statistics no
show_read_percent no
topuser_fields NUM DATE_TIME USERID CONNECT BYTES %BYTES IN-CACHE-OUT USED_TIME MILISEC %TIME TOTAL AVERAGE
user_report_fields CONNECT BYTES %BYTES IN-CACHE-OUT USED_TIME MILISEC %TIME TOTAL AVERAGE
bytes_in_sites_users_report yes
topuser_num 5
dansguardian_conf none
squidguard_conf none
show_sarg_info no
show_sarg_logo no
parsed_output_log none
displayed_values abbreviation
www_document_root /var/www/html
user_authentication no
download_suffix "zip,arj,bzip,gz,ace,doc,iso,adt,bin,cab,com,dot,drv$,lha,lzh,mdb,mso,ppt,rtf,src,shs,sys,exe,dll,mp3,avi,mpg,mpeg"
realtime_refresh_time 10
realtime_access_log_lines 100
realtime_types GET,PUT,CONNECT,POST
keep_temp_log no
If you do not see realtime statistics add full path to sarg binary to /var/www/html/sarg-php/sarg-realtime.php file
<?php
system("/opt/sarg/bin/sarg -r");
?>If you see incorrect urls in realtime statistics patch realtime.c file, then repeat compile and install steps again
Click to see patch file
--- sarg-2.4.0-orig/realtime.c 2019-12-24 11:04:00.000000000 +0000
+++ sarg-2.4.0/realtime.c 2020-12-19 19:58:31.578238661 +0000
@@ -97,19 +97,15 @@ static void StoreLogEntry(struct Realtim
safe_strcpy(Dest->Ip,Entry->Ip,sizeof(Dest->Ip));
if (Entry->Url)
{
- int i;
- const char *url=Entry->Url;
-
- // skip the scheme
- for (i=0 ; i<8 && url[i] && (isalnum(url[i]) || url[i]=='+' || url[i]=='-' || url[i]=='.') ; i++);
- if (url[i]==':' && url[i+1]=='/' && url[i+2]=='/')
- {
- url+=i+3;
- for (i=0 ; url[i] && url[i]!='/' ; i++);
- }
- if (i>=sizeof(Dest->Url)) i=sizeof(Dest->Url)-1;
- strncpy(Dest->Url,url,i);
- Dest->Url[i]='\0';
+ int i = 0;
+ const char *url=Entry->Url;
+ const char *proto=strstr(url,"://");
+ if (proto) {
+ url = proto+3;
+ }
+ i = strlen(url) < sizeof(Dest->Url) ? strlen(url) : sizeof(Dest->Url)-1;
+ memcpy(Dest->Url,url,i);
+ Dest->Url[i]='\0';
}
safe_strcpy(Dest->User,Entry->User,sizeof(Dest->User));
safe_strcpy(Dest->HttpMethod,Entry->HttpMethod,sizeof(Dest->HttpMethod));
SARG statistics will be available:
http://x.x.x.x/sarg/- midnight or ad-hochttp://x.x.x.x/sarg-php/sarg-realtime.php- realtime
Confirm squid has required flags first:
squid -v | grep 'enable-icap-client'squid -v | grep 'enable-ecap'
If not, add & recompile
Note: I do not recommend to install it if you have Raspberry Pi installed on sdcard and less than 8 GB or RAM!
sudo apt-get install clamav clamav-daemon c-icap libicapapi-dev libarchive-dev
curl -fsSLO http://downloads.sourceforge.net/project/squidclamav/squidclamav/7.1/squidclamav-7.1.tar.gz
tar -zxf squidclamav-7.1.tar.gz
./configure --with-c-icap=/usr
make
sudo make install-
Allow i-cap daemon to start at boot
Click to see configuration of /etc/default/c-icap
--- /etc/default/c-icap.orig 2020-12-20 14:44:50.513644910 +0000 +++ /etc/default/c-icap 2020-12-20 14:45:19.003262843 +0000 @@ -3,7 +3,7 @@ # installed at /etc/default/c-icap by the maintainer scripts # Should c-icap daemon run automatically on startup? (default: no) -START=no +START=yes # Additional options that are passed to the Daemon. DAEMON_ARGS="" -
Import squidclamav.so module and change few parameters
Click to see configuration of /etc/c-icap/c-icap.conf
--- /etc/c-icap/c-icap.conf.orig 2020-12-20 14:41:38.516221674 +0000 +++ /etc/c-icap/c-icap.conf 2020-12-20 18:16:28.704142545 +0000 @@ -55,7 +55,7 @@ # generates a number of threads, which serve the requests. # Default: # StartServers 3 -StartServers 3 +StartServers 1 # TAG: MaxServers # Format: MaxServers number @@ -100,7 +100,7 @@ # stability of c-icap. It can be disabled by setting its value to 0. # Default: # MaxRequestsPerChild 0 -MaxRequestsPerChild 0 +MaxRequestsPerChild 100 # TAG: InterProcessSharedMemScheme # Format: InterProcessSharedMemScheme posix | mmap | sysv @@ -129,7 +129,7 @@ # The port number that the c-icap server uses to listen to requests. # Default: # None -Port 1344 +Port 127.0.0.1:1345 # TAG: TlsPort # Format: TlsPort [address:]port [tls-method=method] [cert=path_to_pem_cert] [key=path_to_pem_key] [client_ca=path_to_pem_file] [ciphers=ciph1:ciph2...] [tls_options=[!]Opt1|[!]Opt2|...] @@ -231,7 +231,7 @@ # server (logs, info service, etc) # Default: # No value -ServerName YourServerName +ServerName raspberrypi # TAG: TmpDir # Format: TmpDir dir @@ -258,7 +258,7 @@ # The acceptable range of levels is between 0 and 10. # Default: # DebugLevel 1 -DebugLevel 1 +DebugLevel 0 # TAG: Pipelining # Format: Pipelining on|off @@ -515,6 +515,8 @@ # acl BigObjects content_length{>} 5000000 # acl WorkingHours time M,T,W,H,F/8:00-18:00 # acl FreeHour time Sunday,Saturday/8:00-23:59 M,T,W,H,F/18:01-23:59 M,T,W,H,F/0:00-7.59 +acl localhost src 127.0.0.1/255.255.255.255 +acl PERMIT_REQUESTS type REQMOD RESPMOD # TAG: icap_access # Format: icap_access allow|deny [!]acl1 ... @@ -529,6 +531,8 @@ # #Require authentication for all users from local network: # icap_access allow AUTH localnet # icap_access deny all +icap_access allow localhost PERMIT_REQUESTS +icap_access deny all # TAG: client_access # Format: client_access allow|deny acl1 [acl2] [...] @@ -706,7 +710,8 @@ # Simple test service # Example: # Service echo srv_echo.so -Service echo srv_echo.so +#Service echo srv_echo.so +Service squidclamav squidclamav.so # Module: sys_logger # Description: -
Enable archive support, set redirect url, log threats (you may enable
multiparttoo)Click to see configuration of /etc/c-icap/squidclamav.conf
--- /etc/c-icap/squidclamav.conf.default 2020-12-20 15:00:05.541393122 +0000 +++ /etc/c-icap/squidclamav.conf 2020-12-20 17:31:16.490432907 +0000 @@ -17,7 +17,7 @@ # When a virus is found then redirect the user to this URL. If this directive # is disabled squidclamav will use c-icap error templates to report issues. -redirect http://proxy.domain.dom/cgi-bin/clwarn.cgi +redirect http://raspberrypi/squidclamav/clwarn.cgi # Path to the clamd socket, use clamd_local if you use Unix socket or if clamd # is listening on an Inet socket, comment clamd_local and set the clamd_ip and @@ -32,7 +32,7 @@ # Force SquidClamav to log all virus detection or squiguard block redirection # to the c-icap log file. -logredir 0 +logredir 1 # Enable / disable DNS lookup of client ip address. Default is enabled '1' to # preserve backward compatibility but you must desactivate this feature if you @@ -115,7 +115,7 @@ # file in the archives. Enabling this directive allow squidclamav to uncompress # archives and filter according to user-defined rules before passing them to # clamav. See directives bellow for more details. -enable_libarchive 0 +enable_libarchive 1 # Block matching archive entries (supported by libarchive). # eg. zip files containing threats such as ransomeware that are not yet -
Enable redirect page please note: I'm using pihole and lighttpd
Click to see configuration of /etc/lighttpd/conf-enabled/10-cgi.conf
server.modules += ( "mod_cgi", "mod_alias" ) $HTTP["url"] =~ "^/squidclamav/" { cgi.assign = ( "" => "" ) alias.url += ( "/squidclamav/" => "/usr/local/libexec/squidclamav/" ) } -
Add missing logrotate for c-icap daemon
Click to see configuration of /etc/logrotate.d/c-icap
/var/log/c-icap/server.log /var/log/c-icap/access.log { daily rotate 4 missingok notifempty compress delaycompress create 0644 root root postrotate /etc/init.d/c-icap force-reload > /dev/null endscript } -
Set stream size to 5M, should be the same value as
maxsizein squidclamav.confClick to see configuration of /etc/clamav/clamd.conf
--- /etc/clamav/clamd.conf.orig 2020-12-21 17:34:51.683638477 +0000 +++ /etc/clamav/clamd.conf 2020-12-20 17:29:37.461752724 +0000 @@ -76,7 +76,7 @@ ScanXMLDOCS true ScanHWP3 true MaxRecHWP3 16 -StreamMaxLength 25M +StreamMaxLength 5M LogFile /var/log/clamav/clamav.log LogTime true LogFileUnlock false -
Set explicit cpu-quota to clamav services
Click to see configuration of /etc/systemd/system/clamav-daemon.service.d/override.conf
[Service] CPUQuota=50%Click to see configuration of /etc/systemd/system/clamav-freshclam.service.d/override.conf
[Service] CPUQuota=50% -
Complete Squid configuration with icap settings, malware blocklist, headers allowlist
Click to see configuration of /etc/squid/squid.conf
acl internal_icons urlpath_regex -i /squid-internal-static/icons/ http_access allow internal_icons acl intermediate_fetching transaction_initiator certificate-fetching http_access allow intermediate_fetching sslcrtd_program /usr/lib/squid/security_file_certgen -s /var/spool/squid/ssl_db -M 4MB sslcrtd_children 8 startup=1 idle=1 # sslproxy_cert_error allow all ssl_bump stare all # auth_param basic program /usr/lib/squid3/basic_ncsa_auth /etc/squid/passwd # auth_param basic realm proxy # acl authenticated proxy_auth REQUIRED # acl malware_block_list url_regex -i "/etc/squid/malware_block_list" acl localnet src 0.0.0.1-0.255.255.255 acl localnet src 10.0.0.0/8 acl localnet src 100.64.0.0/10 acl localnet src 169.254.0.0/16 acl localnet src 172.16.0.0/12 acl localnet src 192.168.0.0/16 acl SSL_ports port 443 acl Safe_ports port 80 acl Safe_ports port 21 acl Safe_ports port 443 acl Safe_ports port 70 acl Safe_ports port 210 acl Safe_ports port 1025-65535 acl Safe_ports port 280 acl Safe_ports port 488 acl Safe_ports port 591 acl Safe_ports port 777 acl CONNECT method CONNECT http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow localhost manager http_access deny manager snmp_access deny all icp_access deny all htcp_access deny all http_access deny to_localhost # http_access deny malware_block_list http_access allow localnet http_access allow localhost # http_access allow authenticated http_access deny all http_port 3128 http_port 3129 tcpkeepalive=60,30,3 ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=4MB cert=/etc/squid/cert/ca.pem key=/etc/squid/cert/ca.key cipher=HIGH:MEDIUM:!LOW:!RC4:!SEED:!IDEA:!3DES:!MD5:!EXP:!PSK:!DSS options=NO_TLSv1,NO_SSLv3 tls-dh=prime256v1:/etc/squid/cert/dhparam.pem cache deny all # access_log none access_log daemon:/var/log/squid/access.log squid cache_store_log none cache_log /dev/null via off forwarded_for delete follow_x_forwarded_for deny all logfile_rotate 0 strip_query_terms off shutdown_lifetime 2 seconds memory_pools off dns_v4_first on visible_hostname raspberrypi # icap icap_enable on adaptation_send_client_ip on adaptation_send_username on icap_persistent_connections on icap_client_username_encode off icap_client_username_header X-Authenticated-User icap_preview_enable on icap_preview_size 1024 icap_service_failure_limit -1 acl icap_skip_localnet dst 192.168.0.0/16 icap_service service_req reqmod_precache bypass=0 icap://127.0.0.1:1345/squidclamav icap_service service_resp respmod_precache bypass=0 icap://127.0.0.1:1345/squidclamav adaptation_access service_req deny icap_skip_localnet adaptation_access service_resp deny icap_skip_localnet adaptation_access service_req allow all adaptation_access service_resp allow all # limit headers request_header_access Allow allow all request_header_access Authorization allow all request_header_access WWW-Authenticate allow all request_header_access Proxy-Authorization allow all request_header_access Proxy-Authenticate allow all request_header_access Content-Encoding allow all request_header_access Content-Length allow all request_header_access Content-Type allow all request_header_access Date allow all request_header_access Expires allow all request_header_access Host allow all request_header_access If-Modified-Since allow all request_header_access Last-Modified allow all request_header_access Location allow all request_header_access Pragma allow all request_header_access Accept allow all request_header_access Accept-Charset allow all request_header_access Accept-Encoding allow all request_header_access Accept-Language allow all request_header_access Content-Language allow all request_header_access Mime-Version allow all request_header_access Retry-After allow all request_header_access Title allow all request_header_access Connection allow all request_header_access Proxy-Connection allow all request_header_access User-Agent allow all request_header_access Cookie allow all request_header_access Referer deny all request_header_access X-Forwarded-For deny all request_header_access Via deny all request_header_access All deny all request_header_access Cache-Control deny all httpd_suppress_version_string on
Tweak permissions if required
sudo chmod 644 /etc/logrotate.d/c-icap
sudo chown root:root /etc/logrotate.d/c-icapRestart services
sudo systemctl restart clamav-daemon.service
sudo systemctl restart clamav-freshclam.service
sudo systemctl restart c-icap.service
sudo systemctl restart squid.serviceYou may reload icap configuration without complete restart
sudo sh -c 'echo -n "squidclamav:cfgreload" > /var/run/c-icap/c-icap.ctl'
sudo sh -c 'echo -n "reconfigure" > /var/run/c-icap/c-icap.ctl'Few recommendations:
- install
clamav-unofficial-sigsscript to update ClamAV databases - use safebrowsing only if really needed
Run
sudo systemctl edit clamav-daemon.serviceSet configuration and save
[Service]
CPUQuota=50%
CPUSchedulingPolicy=rr
CPUSchedulingPriority=25
Nice=10
Reload service
sudo systemctl daemon-reload
sudo systemctl restart clamav-daemon.serviceBy default all content will be scanned by ClamAV, it is possible to change this behavior by changing /etc/c-icap/squidclamav.conf file
enable_libarchive 1
scan_mode ScanNothingExcept
scan ^.*\.(pdf|doc|docx|xls|xlsx|xlsm|ppt|pptx)$
scan ^.*\.(zip|rar)$
scan ^.*\.(exe|com|vbs|js|json)$
scancontent ^application\/.*$
Or keep default mode, and drop content like images, audio, video, fonts, etc.
enable_libarchive 1
scan_mode ScanAllExcept
abort ^.*\.(ico|gif|png|jpg|jpeg|svg)$
abort ^.*\.(woff|ttf|otf)$
abortcontent ^image\/.*$
abortcontent ^audio\/.*$
abortcontent ^video\/.*$
abortcontent ^application\/font\-.*$
You may want to download MalwarePatrol Squid ACL lists to be able to use malware_block_list option. Save the script below as malware_list_update.sh, change two variables RECEIPT_ID and PRODUCT_ID, set executable flag like chmod +x malware_list_update.sh, and import it as a new crontab task.
#!/usr/bin/env bash
exists()
{
command -v "$1" >/dev/null 2>&1
}
if ! exists curl ; then
echo 'Error: curl is not installed'
exit 1
fi
if ! exists squid ; then
echo 'Error: squid is not installed'
exit 1
fi
if [ "$EUID" -ne 0 ]; then
echo 'Error: run as root'
exit 1
fi
RECEIPT_ID="" # change me
PRODUCT_ID="" # change me
curl -fsSL "https://lists.malwarepatrol.net/cgi/getfile?receipt=${RECEIPT_ID}&product=${PRODUCT_ID}&list=squid" -o /etc/squid/malware_block_list
curl -fsSL "https://lists.malwarepatrol.net/cgi/getfile?receipt=${RECEIPT_ID}&product=${PRODUCT_ID}&list=squid&hash=1" -o /etc/squid/malware_block_list.md5
integrity_check=0
if [ $(wc -l /etc/squid/malware_block_list.md5 | cut -d' ' -f 1) -gt 2 ]; then
echo 'Warning: skipping integrity check due to license limitation'
else
md5a="$(md5sum /etc/squid/malware_block_list | awk '{print $1}')"
md5b="$(cat /etc/squid/malware_block_list.md5)"
if [[ "$md5a" == "$md5b" ]]; then
echo 'Info: integrity check succeeded'
integrity_check=1
else
echo 'Error: integrity check failed'
integrity_check=0
fi
fi
if [ $integrity_check -eq 1 ]; then
echo 'Info: reloading squid'
sed -i 's#\^https\?\\:\\/\\/#\^\(http\|https\)\\:\\/\\/#g' /etc/squid/malware_block_list
chmod 0644 /etc/squid/malware_block_list
chmod 0644 /etc/squid/malware_block_list.md5
systemctl reload squid.service
else
echo 'Warning: squid reload skipped'
fiMake sure blocklist files downloaded successfully, then uncomment two malware_block_list lines in Squid configuration file
Alternative free version
#!/usr/bin/env bash
exists()
{
command -v "$1" >/dev/null 2>&1
}
if ! exists curl ; then
echo 'Error: curl is not installed'
exit 1
fi
if ! exists squid ; then
echo 'Error: squid is not installed'
exit 1
fi
if [ "$EUID" -ne 0 ]; then
echo 'Error: run as root'
exit 1
fi
curl -fsSL "https://raw.githubusercontent.com/maravento/blackweb/master/blackweb.tar.gz" -o /tmp/blackweb.tar.gz
curl -fsSL "https://raw.githubusercontent.com/maravento/blackweb/master/checksum.md5" -o /etc/squid/blackweb_block_list.md5
tar -xzf /tmp/blackweb.tar.gz -C /etc/squid/ blackweb.txt
mv /etc/squid/blackweb.txt /etc/squid/blackweb_block_list
integrity_check=0
if [ $(wc -l /etc/squid/blackweb_block_list.md5 | cut -d' ' -f 1) -gt 2 ]; then
echo 'Warning: skipping integrity check due to license limitation'
else
md5a="$(md5sum /etc/squid/blackweb_block_list | awk '{print $1;}')"
md5b="$(cat /etc/squid/blackweb_block_list.md5 | awk '{print $1;}')"
if [[ "$md5a" == "$md5b" ]]; then
echo 'Info: integrity check succeeded'
integrity_check=1
else
echo 'Error: integrity check failed'
integrity_check=0
fi
fi
if [ $integrity_check -eq 1 ]; then
echo 'Info: reloading squid'
chmod 0644 /etc/squid/blackweb_block_list
chmod 0644 /etc/squid/blackweb_block_list.md5
systemctl reload squid.service
else
echo 'Warning: squid reload skipped'
fiAdd it to squid.conf file
acl blackweb dstdomain "/etc/squid/blackweb_block_list"
http_access deny blackweb
https://wiki.squid-cache.org/Features/SslPeekAndSplice
https://support.kaspersky.com/KWTS/6.1/en-US/181866.htm
https://github.com/extremeshok/clamav-unofficial-sigs
https://squidclamav.darold.net/documentation.html
https://docs.diladele.com/administrator_guide_stable/install/debian10/index.html