Merge pull request whatawurst#12 from Flamefire/lineage-17.1-update

Lineage 18.1 update

Documentation/networking/bonding.txt

@@ -191,11 +191,12 @@ ad_actor_sys_prio
 ad_actor_system
 
 	In an AD system, this specifies the mac-address for the actor in
-	protocol packet exchanges (LACPDUs). The value cannot be NULL or
-	multicast. It is preferred to have the local-admin bit set for this
-	mac but driver does not enforce it. If the value is not given then
-	system defaults to using the masters' mac address as actors' system
-	address.
+	protocol packet exchanges (LACPDUs). The value cannot be a multicast
+	address. If the all-zeroes MAC is specified, bonding will internally
+	use the MAC of the bond itself. It is preferred to have the
+	local-admin bit set for this mac but driver does not enforce it. If
+	the value is not given then system defaults to using the masters'
+	mac address as actors' system address.
 
 	This parameter has effect only in 802.3ad mode and is available through
 	SysFs interface.

Makefile

@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 4
-SUBLEVEL = 295
+SUBLEVEL = 299
 EXTRAVERSION =
 NAME = Blurry Fish Butt
 

arch/arm/boot/dts/qcom/msm8998-yoshino-common.dtsi

@@ -3625,7 +3625,7 @@
 	linux,name = "wled";
 	qcom,fs-curr-ua = <24000>;
 	qcom,led-strings-list = [00 01 02];
-	somc,init-br-ua = <1200>;
+	somc,init-br-ua = <800>;
 	somc-s1,br-power-save-ua = <800>;
 	somc,bl-scale-enabled;
 	somc,area_count_table_size = <0>;

arch/arm/kernel/entry-armv.S

@@ -625,11 +625,9 @@ call_fpe:
 	tstne	r0, #0x04000000			@ bit 26 set on both ARM and Thumb-2
 	reteq	lr
 	and	r8, r0, #0x00000f00		@ mask out CP number
- THUMB(	lsr	r8, r8, #8		)
 	mov	r7, #1
-	add	r6, r10, #TI_USED_CP
- ARM(	strb	r7, [r6, r8, lsr #8]	)	@ set appropriate used_cp[]
- THUMB(	strb	r7, [r6, r8]		)	@ set appropriate used_cp[]
+	add	r6, r10, r8, lsr #8		@ add used_cp[] array offset first
+	strb	r7, [r6, #TI_USED_CP]		@ set appropriate used_cp[]
 #ifdef CONFIG_IWMMXT
 	@ Test if we need to give access to iWMMXt coprocessors
 	ldr	r5, [r10, #TI_FLAGS]
@@ -638,7 +636,7 @@ call_fpe:
 	bcs	iwmmxt_task_enable
 #endif
  ARM(	add	pc, pc, r8, lsr #6	)
- THUMB(	lsl	r8, r8, #2		)
+ THUMB(	lsr	r8, r8, #6		)
  THUMB(	add	pc, r8			)
 	nop
 

arch/arm/mm/copypage-fa.c

@@ -17,26 +17,25 @@
 /*
  * Faraday optimised copy_user_page
  */
-static void __naked
-fa_copy_user_page(void *kto, const void *kfrom)
+static void fa_copy_user_page(void *kto, const void *kfrom)
 {
-	asm("\
-	stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r2, %0				@ 1\n\
-1:	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	stmia	r0, {r3, r4, ip, lr}		@ 4\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ 1   clean and invalidate D line\n\
-	add	r0, r0, #16			@ 1\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	stmia	r0, {r3, r4, ip, lr}		@ 4\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ 1   clean and invalidate D line\n\
-	add	r0, r0, #16			@ 1\n\
-	subs	r2, r2, #1			@ 1\n\
+	int tmp;
+
+	asm volatile ("\
+1:	ldmia	%1!, {r3, r4, ip, lr}		@ 4\n\
+	stmia	%0, {r3, r4, ip, lr}		@ 4\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ 1   clean and invalidate D line\n\
+	add	%0, %0, #16			@ 1\n\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4\n\
+	stmia	%0, {r3, r4, ip, lr}		@ 4\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ 1   clean and invalidate D line\n\
+	add	%0, %0, #16			@ 1\n\
+	subs	%2, %2, #1			@ 1\n\
 	bne	1b				@ 1\n\
-	mcr	p15, 0, r2, c7, c10, 4		@ 1   drain WB\n\
-	ldmfd	sp!, {r4, pc}			@ 3"
-	:
-	: "I" (PAGE_SIZE / 32));
+	mcr	p15, 0, %2, c7, c10, 4		@ 1   drain WB"
+	: "+&r" (kto), "+&r" (kfrom), "=&r" (tmp)
+	: "2" (PAGE_SIZE / 32)
+	: "r3", "r4", "ip", "lr");
 }
 
 void fa_copy_user_highpage(struct page *to, struct page *from,

arch/arm/mm/copypage-feroceon.c

@@ -13,58 +13,56 @@
 #include <linux/init.h>
 #include <linux/highmem.h>
 
-static void __naked
-feroceon_copy_user_page(void *kto, const void *kfrom)
+static void feroceon_copy_user_page(void *kto, const void *kfrom)
 {
-	asm("\
-	stmfd	sp!, {r4-r9, lr}		\n\
-	mov	ip, %2				\n\
-1:	mov	lr, r1				\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	pld	[lr, #32]			\n\
-	pld	[lr, #64]			\n\
-	pld	[lr, #96]			\n\
-	pld	[lr, #128]			\n\
-	pld	[lr, #160]			\n\
-	pld	[lr, #192]			\n\
-	pld	[lr, #224]			\n\
-	stmia	r0, {r2 - r9}			\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	stmia	r0, {r2 - r9}			\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	stmia	r0, {r2 - r9}			\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	stmia	r0, {r2 - r9}			\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	stmia	r0, {r2 - r9}			\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	stmia	r0, {r2 - r9}			\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	stmia	r0, {r2 - r9}			\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	stmia	r0, {r2 - r9}			\n\
-	subs	ip, ip, #(32 * 8)		\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
+	int tmp;
+
+	asm volatile ("\
+1:	ldmia	%1!, {r2 - r7, ip, lr}		\n\
+	pld	[%1, #0]			\n\
+	pld	[%1, #32]			\n\
+	pld	[%1, #64]			\n\
+	pld	[%1, #96]			\n\
+	pld	[%1, #128]			\n\
+	pld	[%1, #160]			\n\
+	pld	[%1, #192]			\n\
+	stmia	%0, {r2 - r7, ip, lr}		\n\
+	ldmia	%1!, {r2 - r7, ip, lr}		\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	%0, %0, #32			\n\
+	stmia	%0, {r2 - r7, ip, lr}		\n\
+	ldmia	%1!, {r2 - r7, ip, lr}		\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	%0, %0, #32			\n\
+	stmia	%0, {r2 - r7, ip, lr}		\n\
+	ldmia	%1!, {r2 - r7, ip, lr}		\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	%0, %0, #32			\n\
+	stmia	%0, {r2 - r7, ip, lr}		\n\
+	ldmia	%1!, {r2 - r7, ip, lr}		\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	%0, %0, #32			\n\
+	stmia	%0, {r2 - r7, ip, lr}		\n\
+	ldmia	%1!, {r2 - r7, ip, lr}		\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	%0, %0, #32			\n\
+	stmia	%0, {r2 - r7, ip, lr}		\n\
+	ldmia	%1!, {r2 - r7, ip, lr}		\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	%0, %0, #32			\n\
+	stmia	%0, {r2 - r7, ip, lr}		\n\
+	ldmia	%1!, {r2 - r7, ip, lr}		\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	%0, %0, #32			\n\
+	stmia	%0, {r2 - r7, ip, lr}		\n\
+	subs	%2, %2, #(32 * 8)		\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	%0, %0, #32			\n\
 	bne	1b				\n\
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB\n\
-	ldmfd	sp!, {r4-r9, pc}"
-	:
-	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE));
+	mcr	p15, 0, %2, c7, c10, 4		@ drain WB"
+	: "+&r" (kto), "+&r" (kfrom), "=&r" (tmp)
+	: "2" (PAGE_SIZE)
+	: "r2", "r3", "r4", "r5", "r6", "r7", "ip", "lr");
 }
 
 void feroceon_copy_user_highpage(struct page *to, struct page *from,

arch/arm/mm/copypage-v4mc.c

@@ -40,12 +40,11 @@ static DEFINE_RAW_SPINLOCK(minicache_lock);
  * instruction.  If your processor does not supply this, you have to write your
  * own copy_user_highpage that does the right thing.
  */
-static void __naked
-mc_copy_user_page(void *from, void *to)
+static void mc_copy_user_page(void *from, void *to)
 {
-	asm volatile(
-	"stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r4, %2				@ 1\n\
+	int tmp;
+
+	asm volatile ("\
 	ldmia	%0!, {r2, r3, ip, lr}		@ 4\n\
 1:	mcr	p15, 0, %1, c7, c6, 1		@ 1   invalidate D line\n\
 	stmia	%1!, {r2, r3, ip, lr}		@ 4\n\
@@ -55,13 +54,13 @@ mc_copy_user_page(void *from, void *to)
 	mcr	p15, 0, %1, c7, c6, 1		@ 1   invalidate D line\n\
 	stmia	%1!, {r2, r3, ip, lr}		@ 4\n\
 	ldmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	subs	r4, r4, #1			@ 1\n\
+	subs	%2, %2, #1			@ 1\n\
 	stmia	%1!, {r2, r3, ip, lr}		@ 4\n\
 	ldmneia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	bne	1b				@ 1\n\
-	ldmfd	sp!, {r4, pc}			@ 3"
-	:
-	: "r" (from), "r" (to), "I" (PAGE_SIZE / 64));
+	bne	1b				@ "
+	: "+&r" (from), "+&r" (to), "=&r" (tmp)
+	: "2" (PAGE_SIZE / 64)
+	: "r2", "r3", "ip", "lr");
 }
 
 void v4_mc_copy_user_highpage(struct page *to, struct page *from,

arch/arm/mm/copypage-v4wb.c

@@ -22,29 +22,28 @@
  * instruction.  If your processor does not supply this, you have to write your
  * own copy_user_highpage that does the right thing.
  */
-static void __naked
-v4wb_copy_user_page(void *kto, const void *kfrom)
+static void v4wb_copy_user_page(void *kto, const void *kfrom)
 {
-	asm("\
-	stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r2, %2				@ 1\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-1:	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4+1\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	subs	r2, r2, #1			@ 1\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmneia	r1!, {r3, r4, ip, lr}		@ 4\n\
+	int tmp;
+
+	asm volatile ("\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4\n\
+1:	mcr	p15, 0, %0, c7, c6, 1		@ 1   invalidate D line\n\
+	stmia	%0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4+1\n\
+	stmia	%0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4\n\
+	mcr	p15, 0, %0, c7, c6, 1		@ 1   invalidate D line\n\
+	stmia	%0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4\n\
+	subs	%2, %2, #1			@ 1\n\
+	stmia	%0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmneia	%1!, {r3, r4, ip, lr}		@ 4\n\
 	bne	1b				@ 1\n\
-	mcr	p15, 0, r1, c7, c10, 4		@ 1   drain WB\n\
-	ldmfd	 sp!, {r4, pc}			@ 3"
-	:
-	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
+	mcr	p15, 0, %1, c7, c10, 4		@ 1   drain WB"
+	: "+&r" (kto), "+&r" (kfrom), "=&r" (tmp)
+	: "2" (PAGE_SIZE / 64)
+	: "r3", "r4", "ip", "lr");
 }
 
 void v4wb_copy_user_highpage(struct page *to, struct page *from,

arch/arm/mm/copypage-v4wt.c

@@ -20,27 +20,26 @@
  * dirty data in the cache.  However, we do have to ensure that
  * subsequent reads are up to date.
  */
-static void __naked
-v4wt_copy_user_page(void *kto, const void *kfrom)
+static void v4wt_copy_user_page(void *kto, const void *kfrom)
 {
-	asm("\
-	stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r2, %2				@ 1\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-1:	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4+1\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	subs	r2, r2, #1			@ 1\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmneia	r1!, {r3, r4, ip, lr}		@ 4\n\
+	int tmp;
+
+	asm volatile ("\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4\n\
+1:	stmia	%0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4+1\n\
+	stmia	%0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4\n\
+	stmia	%0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4\n\
+	subs	%2, %2, #1			@ 1\n\
+	stmia	%0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmneia	%1!, {r3, r4, ip, lr}		@ 4\n\
 	bne	1b				@ 1\n\
-	mcr	p15, 0, r2, c7, c7, 0		@ flush ID cache\n\
-	ldmfd	sp!, {r4, pc}			@ 3"
-	:
-	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
+	mcr	p15, 0, %2, c7, c7, 0		@ flush ID cache"
+	: "+&r" (kto), "+&r" (kfrom), "=&r" (tmp)
+	: "2" (PAGE_SIZE / 64)
+	: "r3", "r4", "ip", "lr");
 }
 
 void v4wt_copy_user_highpage(struct page *to, struct page *from,