Demo

Image Mode

• GUI

• OLED 128*64

• TFT 320*240

Video Mode & Screen Mode

Please watch the demo video.

How it works

Please referance to this article.

Hardware:

• STM32F103CET6 Blue Pill
• OLED_12864_SSD1306 with IIC interface, or you could port to other screen interfaces.
• USB to UART converter
• ST-Link Debuger, any tools could the download program to the MCU.

硬件：

• STM32F103CET6 Blue Pill
• OLED_12864_SSD1306 IIC 接口，或者你能移植到其它屏幕或接口
• USB-UART 转换接口
• ST-Link 调试器，任何能够下载程序到MCU的均可

IDE:

• MCU: CubeMX_IDE, or you can port my source code to your IDE.
• Python IDE: PyCharm, not required if you know how to run python in a terminal.

集成开发环境：

• 单片机：CubeMX_IDE，或者你可以移植源代码到你使用的IDE
• Python：PyCharm，并不是必须的，可以在命令行中运行程序

Python Modules:

• python 3.x

I wrote an environment setup script in \python_gui\tools\environment_setup.py, which could help you install modules below, but you must first install python 3.x to run this script.

我写了一个环境建立的脚本在：\python_gui\tools\environment_setup.py, 它可以帮助你安装下面的模块， 但是首先你得安装Python 3.x来运行这个脚本

• pyserial
• numpy
• opencv-python
• PyQt5
• pywin32

How to Run:

0, Make sure you have all the required hardware and software.
1, Download the MCU program and connect USB2UART module, then restart MCU.
2, Run GUI on a Windows PC:
	0, Open the folder: \python_gui
	1, Open a terminal enter and run cmd: python main.py
		Or Run main.py in PyCharm IDE.
	2, Scan the serial port and select the right one to connect to the MCU.
	3, Do whatever you want...

怎样运行：

0，确认你具备需要的硬件与软件
1，下载单片机程序并连接串口到单片机，然后复位单片机
2，在Window电脑上运行图形用户界面：
	0，打开文件夹：\python_gui
	1，打开中端输入并运行：python main.py
		或者在PyCharm中运行main.py
	2，扫描串口并选择正确的连接到单片机
	3，想干嘛干嘛