A collection of files and GodMode9 scripts to easily install NTRBootHax onto a stock 2DS/3DS console without the need of a computer after initial setup of the microSD card.
- A NTRBootHax NDS flash cart
- A microSD card
- A #0 crosshead (+) screw driver or screw driver bit
- A magnet for all models but 2DS
- A microSD to SD adapter for 2DS and o3DS/XL
Copy the pack
, gm9
, & boot9strap
folders, and boot.firm
file to the root of your setup SD card.
- Insert prepared microSD card with packed files into the target 2DS/3DS.
- Insert NTRBootHax flash cart
- Place magnet on target device so that the device sleeps without the lid being shut. On 2DS no magnet is needed, only the sleep switch set to the sleep position. Make sure device is powered off.
- Hold
Start
+Select
+X
and then press and hold the power button until the power LED lights up. Let go of all four buttons. - GodMode9 should open. Decline making an essential backup. If the device starts up as normal, try again, check the magnet position or check that your NTRBootHax flash cart is properly made.
- Press the Home button and go to
Scripts... > Setup
- Confirm unlocking SysNAND lvl 3 write permissions by inputting button combo.
- Swap SD cards when prompted & press
A
to confirm SD card swap. - Press
A
to finish and restart console. - Select desired Luma3DS options and press
Start
to save and boot into the Home Menu.
- Unwrap the installed CIAs and use the Universal Updater to ensure you're up to date.