Homebridge Gree AC Adapter

Features

• Turning the Gree AC on or off
• Mode setting
• Temperature units setting
• Target temperature setting
• Current temperature display
• Setting the wind speed (setting it to 0, sets the AC to Auto; can only be set if both Quiet and Turbo are off)
• Setting the wind direction (switching from predefined fixed to predefined swinging and vice versa, both based on the current operating mode)
• Turning Quiet on or off (setting Quiet to on, sets Turbo to off, if it is set to on)
• Turning Turbo on or off (setting Turbo to on, sets Quiet to off, if it is set to on; can only be set to on if the current operating mode is not Heat)
• Turning Light on or off
• Turning X-Fan on or off
• Turning Sleep on or off
• Turning Health on or off

Configuration

For an easier configuration process, check out Homebridge Config UI X. If you do not wish to use the previous method of configuring the plugin, you must manually edit the config.json file. The following table shows the necessary properties, along with their recommended values and a short description of what the property is for.

Key	Default	Description
port	7000	Port used for communicating with the device.
scanPort	7000	Port used for scanning for devices.
scanAddress		The IPv4 address to be used for local network device scanning.
scanInterval	1000	Time in milliseconds between two consecutive scans.
scanMaxRetries	3	Maximum number of retries before stopping the scan process.
refreshInterval	1000	Time in milliseconds between device` status update requests.
debug	false

Limitations

• Because there are not supported by HAP Specification, the following modes are not available: Dry, Fan
• Temperature display units only affects and reflects the display and operating units on the device. HAP Specification clearly stands: "Celsius is the only temperature unit in the HomeKit Accessory Protocol. Unit conversion is always done on the client side e.g. on the iPhone in the Home App depending on the configured unit on the device itself."
• HAP Specification doesn't offer a way for fine-tuning the swinging (as the Gree remote and app do). Swing mode only describes if swinging is enabled or disabled. Such, predefined settings are used for both values of this characteristic, these predefined settings being adapted to the current operating mode.
• Turbo cannot be turned on if the current operating mode is Heat. This is a constraint of the Gree Air Conditioner itself.

Gree Air Conditioner API

There are 2 message types for the communication between the implemented application and the Gree device:

1. scan
2. pack

There are 4 request types which can be sent to the Gree device:

1. scan
2. bind
3. status
4. cmd

There are 4 response types which can be received from the Gree device:

1. dev
2. bindok
3. dat
4. res

Each line in the following table shows the corresponding response type for each request type along with their associated individual message types (request message type and response message type):

Request Message Type	Request Type	Response Message Type	Response Type
scan	scan	pack	dev
pack	bind	pack	bindok
pack	status	pack	dat
pack	cmd	pack	res

---

Scanning for devices

• request (sent as a broadcast message to the local network)

{
  "t": "scan"
}

• response

{
  "t":    "pack",
  "i":    1,
  "uid":  0,
  "cid":  "<MAC>",
  "tcid": "",
  "pack": {
    "t":       "dev",
    "bc":      "gree",
    "brand":   "gree",
    "catalog": "gree",
    "cid":     "<MAC>",
    "mac":     "<MAC>",
    "mid":     "10001",
    "model":   "gree",
    "name":    "<FRIENDLY NAME>",
    "series":  "gree",
    "vendor":  "1",
    "ver":     "<VERSION>",
    "lock":    0
  }
}

---

Binding to a device

• request

{
  "t":    "pack",
  "i":    1,
  "uid":  0,
  "cid":  "app",
  "tcid": "<MAC>",
  "pack": {
    "t":   "bind",
    "uid": 0,
    "mac": "<MAC>"
  }
}

• response

{
  "t":    "pack",
  "i":    1,
  "uid":  0,
  "cid":  "<MAC>",
  "tcid": "app",
  "pack": {
    "r":   200,
    "t":   "bindok",
    "mac": "<MAC>",
    "key": "<KEY>"
  }
}

---

Requesting the status of a device

• request

{
  "t":    "pack",
  "i":    0,
  "uid":  0,
  "cid":  "app",
  "tcid": "<MAC>",
  "pack": {
    "t":    "status",
    "mac":  "<MAC>",
    "cols": [
      "Pow",
      "Mod",
      "SetTem",
      "TemRec",
      "TemUn",
      "WdSpd",
      "SwingLfRig",
      "SwUpDn",
      "Blo",
      "Health",
      "Lig",
      "SwhSlp",
      "Quiet",
      "Tur",
      "StHt",
      "SvSt",
      "HeatCoolType"
    ]
  }
}

• response

{
  "t":    "pack",
  "i":    0,
  "uid":  0,
  "cid":  "<MAC>",
  "tcid": "",
  "pack": {
    "r":    200,
    "t":    "dat",
    "mac":  "<MAC>",
    "cols": [
      "Pow",
      "Mod",
      "SetTem",
      "TemRec",
      "TemUn",
      "WdSpd",
      "SwingLfRig",
      "SwUpDn",
      "Blo",
      "Health",
      "Lig",
      "SwhSlp",
      "Quiet",
      "Tur",
      "StHt",
      "SvSt",
      "HeatCoolType"
    ],
    "dat":  [1, 1, 25, 1, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0]
  }
}

---

Sending commands to a device

• request

{
  "t":    "pack",
  "i":    0,
  "uid":  0,
  "cid":  "app",
  "tcid": "<MAC>",
  "pack": {
    "t":   "cmd",
    "opt": ["Pow", "Mod", "SetTem", "WdSpd"],
    "p":   [1, 0, 27, 0]
  }
}

• response

{
  "t":    "pack",
  "i":    0,
  "uid":  0,
  "cid":  "<MAC>",
  "tcid": "",
  "pack": {
    "r":   200,
    "t":   "res",
    "mac": "<MAC>",
    "opt": ["Pow", "Mod", "SetTem", "WdSpd"],
    "val": [1, 0, 27, 0],
    "p":   [1, 0, 27, 0]
  }
}

---

Sending the target temperature in Fahrenheit

Fahrenheit (F)	Celsius (C)	TemSet	TemRec
61	16.1	16	1
62	16.7	17	0
63	17.2	17	1
64	17.8	18	0
65	18.3	18	1
66	18.9	19	0
67	19.4	19	1
68	20.0	20	1
69	20.6	21	0
70	21.1	21	1
71	21.7	22	0
72	22.2	22	1
73	22.8	23	0
74	23.3	23	1
75	23.9	24	0
76	24.4	24	1
77	25.0	25	1
78	25.6	26	0
79	26.1	26	1
80	26.7	27	0
81	27.2	27	1
82	27.8	28	0
83	28.3	28	1
84	28.9	29	0
85	29.4	29	1
86	30.0	30	1

C = (F - 32.0) / 1.8
TemSet = round(C)
TemRec = (C - TemSet) < 0 ? 0 : 1

---

Reading the target temperature in Fahrenheit

TemSet	TemRec	Fahrenheit (F1)	Fahrenheit (F2)
16	1	60.8	61
17	0	62.6	62
17	1	62.6	63
18	0	64.4	64
18	1	64.4	65
19	0	66.2	66
19	1	66.2	67
20	1	68	68
21	0	69.8	69
21	1	69.8	70
22	0	71.6	71
22	1	71.6	72
23	0	73.4	73
23	1	73.4	74
24	0	75.2	75
24	1	75.2	76
25	1	77	77
26	0	78.8	78
26	1	78.8	79
27	0	80.6	80
27	1	80.6	81
28	0	82.4	82
28	1	82.4	83
29	0	84.2	84
29	1	84.2	85
30	1	86	86

F1 = TemSet * 1.8 + 32
F2 = (F1 % 1 == 0) ? F1 : (floor(F1) + TemRec)