Error, Root grid is not initialized

[madzul]

centos x86_64,
cuda 12.3
Nvidia L40S

Got this:

************** GPU-COMCOT ******************

•                                      *
  

•        VERSION= G1.7                 *
  

•                                      *
  

---

READING PARAMETERS FOR SIMULATION...
READING GENERAL INFORMATION......
READING PARAMETERS FOR FAULT MODEL......
READING PARAMETERS FOR GRID LAYER......
READING PARAMETERS FOR GRID LAYER ID 1
READING PARAMETERS FOR GRID LAYER ID 2
GENERATING NESTED GRIDS IN LAYER 1
READING BATHYMETRY DATA...
READING XYZ BATHMETRY DATA FOR LAYER ID 1
READING XYZ BATHMETRY DATA FOR LAYER ID 2
[WARNING] IF RAPTURE TIME != 0 MAY CAUSE DATA INCONSISTENCY BETWEEN HOST AND DEVICE
[WARNING] SHOULDN'T IGNORE THIS MESSAGE IF IT APPEARS IN THE SIMULATION LOOP
[WARNING] UPDATING H
[WARNING] WRITING INFORMATION TO Z, SHOULDN'T IGNORE THIS MESSAGE IF IT APPERS IN THE SIMULATION LOOP
ADJUSTING BATHYMETRY AND SETUP SHORELINE...
VALIDATING AND DETERMINING TIME STEP SIZES......
CALCULATING COEFFICIENTS FOR SPHERICAL COORD.

---

•       INPUT INFORMATION - COMCOT V1.7               *
  

---

------------------- GENERAL INFORMATION -------------------
TOTAL RUN TIME (SECOND) : 7200.00000
TIME INTERVAL FOR OUTPUT (SECOND) : 60.0000000
TIME STEP SIZE (SECOND) : 5.00000000
TOTAL STEPS TO RUN (STEPS) : 1440
STEP INTERVAL FOR OUTPUT (STEPS) : 12
SHORELINE LOCATED AT DEPTH CONTOUR : 0.00000000

---------------- INITIAL CONDITION INFORMATION ---------------
#USE BUILT-IN FAULT MODEL
TOTAL NUMBER OF FAULT SEGMENTS : 1
PARAMETERS FOR FAULT SEGMENT : 1
FAULT RUPTURE TIME (SECOND) : 0.00000000
EPICENTER (LON, LAT) (DEGREE) : 63.0000000 24.5000000
FOCAL DEPTH (KILOMETER) : 20.0000000
FAULT LENGTH (KILOMETER) : 129.000000
FAULT WIDTH (KILOMETER) : 38.0000000
STRIKE ANGLE (THETA, DEGREE) : 240.000000
DIP ANGLE (DELTA, DEGREE) : 5.50000000
SLIP ANGLE (LAMBDA, DEGREE) : 90.0000000
DISLOCATION (METER) : 7.30000019

--------------- 1ST-LEVEL GRID INFORMATION -----------------
# GRID IDENTIFICATION NUMBER : 1
USE SPHERICAL COORDINATE SYSTEM
USE LINEAR SHALLOW WATER EQUATIONS
BOTTOM FRICTION : DISABLED
SURFACE DISPLACEMENT OUTPUT : DISABLED
GRID LAYER POSITIONS :
X_START (DEGREE) : 30.0000000
X_END (DEGREE) : 75.0000000
Y_START (DEGREE) : -10.0000000
Y_END (DEGREE) : 34.9814682
GRID DIMENSION (NXNY) : 1351 * 1424
GRID SIZE (DX,MINUTE) : 2.00000000
GRID SIZE (DY,MINUTE) : 2.00000000
TIME STEP SIZE (DT, SECOND) : 5.00000000
NUMBER OF CHILD GRID LAYERS : 1
CHILD GRID LAYER ID : 2
BATHYMETRY DATA FILE NAME :../data/etopo.xyz
--------------- SUB-LEVEL GRID INFORMATION -----------------
# GRID IDENTIFICATION NUMBER : 2
USE SPHERICAL COORDINATE SYSTEM
USE LINEAR SHALLOW WATER EQUATIONS
BOTTOM FRICTION : DISABLED
VOLUME FLUX OUTPUT : DISABLED
SURFACE DISPLACEMENT OUTPUT : ENABLED
PARENT GRID ID : 1
GRID SIZE RATIO : 4
TIME STEP SIZE RATIO : 3
POSITIONS IN ITS PARENT LAYER :
X_START (DEGREE) : 46.0208359
X_END (DEGREE) : 63.9791679
Y_START (DEGREE) : 20.0162964
Y_END (DEGREE) : 31.9900436
I_START (INDEX) : 482
I_END (INDEX) : 1020
J_START (INDEX) : 916
J_END (INDEX) : 1316
GRID DIMENSION (NXNY) : 2156 * 1604
GRID SIZE (DX,MINUTE) : 0.500000000
GRID SIZE (DY,MINUTE) : 0.500000000
TIME STEP SIZE (DT, SECOND) : 1.66666663
NUMBER OF CHILD GRID LAYERS : 0
BATHYMETRY DATA FILE NAME :../data/gulf.xyz

GPU INFORMATIONS: NVIDIA L40S
-->Compute Capabilities [Major.Miner]: 8.9
-->Clock Rate: 2520000
-->Streaming Multi-Processor Count: 142
-->Shared Memory size per SM 49152
-->Total Constant Memory size: 65536
-->Maximum Grid Size: 2147483647x65535x65535
-->Warp Size: 32
Initializing layer id 1
Error, Root grid is not initialized