Opton GP801R OEM stick in Turris Omnia #31

AreYouLoco · 2022-05-11T09:08:52Z

Hi I recently bought Opton GP801R and it seems like its normal V2801F underneat. I can login there with admin/stdONU101 and webui title says V2801F.

My router Turris Omnia has SFP cage and its 2,5Gbps capable. I was wondering is it safe to flash latest firmware of yours and will it work @2,5Gbps.

What steps are needed to flash this firmware?

Is doing https://github.com/Anime4000/RTL960x/tree/main/Firmware/V2801F only needed or do I have to worry about VS_AUTH_KEY even if I have no need to change MAC address.

I've read the whole #17 Great work!

Anime4000 · 2022-05-11T09:15:16Z

No need to worry if keeping MAC Address and/or HW version original value...

Do note that V2801F support 2.5GbE in limited of device, so far I tried with TL-XDR5480 just fine

also V2801F don't have automatic LAN_SDS_MODE negotiation like ODI Stick, incase of lock out or cannot login, you still can access via UART

AreYouLoco · 2022-05-11T09:22:37Z

I have UART adapter and SPI programmer in case but I would like to avoid taking apart the SFP. So when I run flash set LAN_SDS_MODE 1 and then flash your firmware that should be enough?

Also you should add Opton GP801R as another clone to the documentation and when I succeed with flashing and testing I will report back if it works with my router. Now it detects 1Gbps link because EEPROM patch is included in this openwrt version. Will see if it does 2,5Gbps.

Also how do I know if the firmware flashed successfully? Will it reboot after flashing or do I have to reboot? And if then how do I know when?

Anime4000 · 2022-05-11T09:47:54Z

Yes, you need run flash set LAN_SDS_MODE 1, then you can update

it will reboot automatically when firmware update is complete, but still no indicator if stick is finish booting or hang... only way to know is read UART output...

I add Opton GP801R as V2801F clone

AreYouLoco · 2022-05-11T14:20:01Z

So I flashed your firmware and after reboot the webui changed to yours but the negotiated speed is still 1Gbps. My router has 2,5Gb sfp port. Even to get that webui it was worth it. But what I could try to set speed to 2,5GbE?

AreYouLoco · 2022-05-11T14:26:06Z

root@router:~# dmesg | grep -E "(sfp|eth2)"
[ 1.854999] mvneta f1034000.ethernet eth2: Using hardware mac address d8:58:d7:00:3d:9f
[ 7.281393] sfp sfp: Host maximum power 3.0W
[ 7.619766] sfp sfp: Detected broken RTL8672/RTL9601C emulated EEPROM
[ 7.626231] sfp sfp: Switching to reading EEPROM to one byte at a time
[ 7.672993] sfp sfp: module OEM V2801F rev 1.0 sn 202110220325
dc 211027
[ 7.682342] mvneta f1034000.ethernet eth2: interfaces=[mac=4,8-11,16,18-19 sfp=18] selected 18 (1000base-x)
[ 7.692108] mvneta f1034000.ethernet eth2: switched to inband/1000base-x link mode
[ 7.702155] sfp sfp: skipping hwmon device registration due to broken EEPROM
[ 7.709220] sfp sfp: diagnostic EEPROM area cannot be read atomically to guarantee data coherency
[ 11.684938] mvneta f1034000.ethernet eth2: configuring for inband/1000base-x link mode
[ 11.860345] mvneta f1034000.ethernet eth2: Link is Up - 1Gbps/Full - flow control off
[ 11.877244] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready

EDIT:
Do you think I could try LAN_SDS_MODE = 6 as you did on MacchiatoBin???

AreYouLoco · 2022-05-11T14:37:39Z

Also when I go to Backup & Restore it works but when I click on Backup then I got error Invalid config and 192.168.1.1 becomes unavaliable. Reboot fixes it. So maybe some bug in webui

AreYouLoco · 2022-05-11T14:50:40Z

Another problem I encountered is that I can login to WebUI with admin/stdONU101 but cannot login to telnet with that credentials. I tried to change password with WebUI and it succeded but still cannot login with telnet. Waiting for your advice.

AreYouLoco · 2022-05-11T15:25:12Z

Ok I flashed firmware again. It was upgrading firmware -> rebooting and instead of rebooting the router I did ifup on the interface because of the errors (below) I saw in log and I could login via telnet from my mobile. So false alarm.

[2780.147161] mvneta f1034000.ethernet eth2: Link is Down
[ 2780.152425] sfp sfp: module transmit fault indicated
[ 2785.592264] sfp sfp: module persistently indicates fault, disabling
[ 2825.419723] mvneta f1034000.ethernet eth2: configuring for inband/1000base-x link mode
[ 2825.487596] mvneta f1034000.ethernet eth2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 2825.495648] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready

EDIT: The same error appers when I try to save backup config. Could you please confirm saving backup config works with your hardware?

tdmadam · 2022-05-11T16:45:58Z

@AreYouLoco
I prefer to use netcat to backup the whole mtd3 partition(config)

AreYouLoco · 2022-05-11T16:48:15Z

Yeah thats a solution but for now I have nothing to backup. Default config.
Was trying to make a point that WebUI might be broken. But thanks!

tdmadam · 2022-05-11T17:01:08Z

Yes, the WebUI is cool, but I still prefer the console because it provides feedback. It would be nice if Anime4000 created a repository for the own version of firmware where we could submit fixes and send pull requests.

I lost confidence in ODI listening to us and fixing anything a long time ago.

Anime4000 · 2022-05-11T19:31:26Z

I plan to create new repo for WebGUI but... I found out ASP variable is different each firmware and stick, cannot made into universal, unless we have RTL960x source code, we can build and fix our own firmware...

I make new WebGUI just to follow HTML5 standard and big screen, I also notice change value in GUI seem not work especially in omci_info.asp page. but good interface to view...

You can try LAN_SDS_MODE 6 (2500BaseX) if your router support Base-X
Most router support LAN_SDS_MODE 1 (1000BaseX) because of supported IEEE standard...

Do note 2500BaseX is not an IEEE standard, you might need set 0x8000 in ethtool

Mode	Advert
2500BaseT	0x800000000000
2500BaseX	0x8000

tdmadam · 2022-05-12T03:00:18Z

I plan to create new repo for WebGUI but... I found out ASP variable is different each firmware and stick, cannot made into universal, unless we have RTL960x source code, we can build and fix our own firmware...

I make new WebGUI just to follow HTML5 standard and big screen, I also notice change value in GUI seem not work especially in omci_info.asp page. but good interface to view...

I was thinking more about using V1.0-220414 as a base, fix the WebUI, maybe add some new pages that show what VLANs are available, read EEPROM, custom scripts and variables that are written to /var/config and available after reboot.

Anime4000 · 2022-05-12T04:35:04Z

seem possible if you can reverse engineering boa to add new ASP variable.

view available VLAN in WebGUI is very neat feature!

tdmadam · 2022-05-13T15:26:29Z

To some extent boa could be tweaked or at least replicated some of its functions, but I get your point. It's not sustainable in the long run. This is why I say that CLI should be the primary method of configuration. With 40 stars now, you have a lot of audience. If everyone can share their insights, then a common set of commands can be developed for different service configuration scenarios(RGU,Bridge,Mixed) and different VLAN implementations(Transparent, Double tagged, Translated).

Anime4000 · 2022-05-13T16:04:50Z

Indeed...
What I know, ODI stick have issue with IPTV VLAN #32

it seem Hisense RTL9601B and Firmware has very stable firmware and have working list of VLAN id on vlan.asp like this
#18 (comment)

tdmadam · 2022-05-13T16:24:04Z

it seem Hisense RTL9601B and Firmware has very stable firmware and have working list of VLAN id on vlan.asp like this
#18 (comment)

I would really like to get this working properly on our sticks. I think I've seen something similar implemented on my 1-port box, and even captured the command used to "discover" VLANs.

A little offtopic:
Has anyone physically opened the LTE3415 to see what SoC is inside? On the internet there are two versions of the LTE3415, probably with two different chips

LTE3415-SCA+     RTL9601B
LTE3415-SH+      RTL9601CI

Can anyone confirm.

vuducdong · 2022-05-13T16:35:46Z

it seem Hisense RTL9601B and Firmware has very stable firmware and have working list of VLAN id on vlan.asp like this

#18 (comment)

I would really like to get this working properly on our sticks. I think I've seen something similar implemented on my 1-port box, and even captured the command used to "discover" VLANs.

A little offtopic:

Has anyone physically opened the LTE3415 to see what SoC is inside? On the internet there are two versions of the LTE3415, probably with two different chips
LTE3415-SCA+     RTL9601B

LTE3415-SH+      RTL9601CI
Can anyone confirm.

LTE3415-SCA+ support 1G (SGMII)

LTE3415-SH+ support 2.5G (HSGMII)

tdmadam · 2022-05-13T17:32:29Z

Thanks! Great information!

crrodriguez · 2022-05-13T22:30:06Z

if I try LAN_SDS_MODE 6 on the ODI stick with the latest firmware and the router does notr support HSGMII will I permantently D.o.S myself out of the stick ? or it will fallback to mode 1 ?

AreYouLoco · 2022-05-16T20:42:17Z

My router is 2500BaseT not 2500BaseX so I guess no 2,5Gbps for me:(

stich86 · 2022-05-28T17:17:05Z

it seem Hisense RTL9601B and Firmware has very stable firmware and have working list of VLAN id on vlan.asp like this

#18 (comment)

I would really like to get this working properly on our sticks. I think I've seen something similar implemented on my 1-port box, and even captured the command used to "discover" VLANs.
A little offtopic:
Has anyone physically opened the LTE3415 to see what SoC is inside? On the internet there are two versions of the LTE3415, probably with two different chips
LTE3415-SCA+     RTL9601B

LTE3415-SH+      RTL9601CI
Can anyone confirm.
LTE3415-SCA+ support 1G (SGMII)

LTE3415-SH+ support 2.5G (HSGMII)

Can you share your MTD dump? I want to test it on UF-Instant :)

vuducdong · 2022-05-29T00:27:58Z

@stich86 @Anime4000 here's full dump mtd for LTE3415-SCA+ (RTL9601B)

Hisense_LTE3415-SCA+ v1.7.3-200909.zip

stich86 · 2022-05-30T14:11:58Z

@stich86 @Anime4000 here's full dump mtd for LTE3415-SCA+ (RTL9601B)

Hisense_LTE3415-SCA+ v1.7.3-200909.zip

thx for sharing
Where did you get that stick?

thx

vuducdong · 2022-05-30T16:07:49Z

@stich86 hi, I'm from Vietnam.

marcinkuczera · 2022-06-09T11:50:34Z

LTE3415-SH+ is one of best in class hardware design of SFP GPON stick, it's version is industrial (up to +85 celsius) and it contains additional MCU that handles most of I2C operations (instead of passing through via 9601C)

We do our own sticks based on that hardware from Hisense, but our own firmware. Much newer SDK (Luna 3.3) and kernel 3.18.x + ofcourse our well modified OMCI stack for wide interoperability.
The model is LXT-010S-H, and will be available soon.

stich86 · 2022-06-09T11:53:46Z

LTE3415-SH+ is one of best in class hardware design of SFP GPON stick, it's version is industrial (up to +85 celsius) and it contains additional MCU that handles most of I2C operations (instead of passing through via 9601C)

We do our own sticks based on that hardware from Hisense, but our own firmware. Much newer SDK (Luna 3.3) and kernel 3.18.x + ofcourse our well modified OMCI stack for wide interoperability.

The model is LXT-010S-H, and will be available soon.

Wow you are the same person on LaFibre for the External ethernet 2.5 ONT? It will support HiSGMII on SFP?

Let us know when available :)

Anime4000 · 2022-06-09T12:41:05Z

Nice, I would to buy and reasonable price,
I want to try with my Fiber Vendor (using 4-port ONU SFU) and my internet explicitly only on LAN 2 and OLT disable LAN 1, 3, 4...

Model number seem like Alcatel/Nokia

marcinkuczera · 2022-06-09T12:57:26Z

Seems that answering on mail does not appears in web interface conversation.

Well, in case of price - if you have working product that is even 2x more expansive than crappy annoying "sell and forget" units - and you buy 2-3-4 or more of these for tests... what is cheaper ? :)

With 4 port emulation, not that easy. I mean - I would have to do a fake EthUni entities (0x101 to 0x104) - all bound with same physical port. And - if your ISP does configuration of all ports as untagged, such ONT would need to enforce tag to be left as is on PON port - otherwise you get a conflict. Quite complicate, I mean - lot of time to do it.
If it is like you say - maybe it is simpler, I mean - instead of 0x101 to present with EthUni 0x102..
But maybe - your ISP uses 4 port ONTs that work in VEIP mode (bridges are create by TR069 provisioning or other XML method)... lot of options. I would need to see OMCI provisioning log to recognize how they do it.

Anime4000 · 2022-06-09T15:02:44Z

I was finding good firmware that able to overcome 4-port Emulation, it seem ODI release 2 different firmware which is my fiber only work with SFU mode

I become obsess with GPON, so I learn hard way 😄

I don't mind if cost, as long have good supported stable firmware,
I even make HTML5 Bootstrap WebGUI for V2801F just for High DPI Screen and look nice...

In my country,
Fiber Vendor provide multiple ISP and provision only OMCI, since OLT need to support multiple brand of ONU, VLAN mapping is 1:1, PON bridge to ETH with VLAN aware

In case ONT would need to enforce tag to be left as is on PON port, probably do like OpenWRT in MA5671a:

Display available VLAN at PON side
Create VLAN Mapping PON:ETH (2:100, 4:500, 7:155)
Support PVID for router don't support VLAN such as TL-XDR5480

I would be nice allow user to upload custom OMCI Profile, user can switch any OMCI Profile to spoof OLT

I'll try capture my PON OMCI Wireshark to you discover. This my VLAN Filter Data:

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
VlanTagFilterData
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
=================================
EntityID: 0x1202
FilterTbl[0]: PRI 0,CFI 0, VID 621
FwdOp:  0x10
NumOfEntries: 1
=================================
=================================
EntityID: 0x1203
FilterTbl[0]: PRI 0,CFI 0, VID 821
FwdOp:  0x10
NumOfEntries: 1
=================================
=================================
EntityID: 0x1204
FilterTbl[0]: PRI 0,CFI 0, VID 822
FwdOp:  0x10
NumOfEntries: 1
=================================
=================================
EntityID: 0x120b
FilterTbl[0]: PRI 0,CFI 0, VID 621
FilterTbl[2]: PRI 0,CFI 0, VID 821
FilterTbl[4]: PRI 0,CFI 0, VID 822
FwdOp:  0x10
NumOfEntries: 3
=================================
=================================
EntityID: 0xe102
FilterTbl[0]: PRI 0,CFI 0, VID 209
FwdOp:  0x10
NumOfEntries: 1
=================================
=================================
EntityID: 0xe10b
FilterTbl[0]: PRI 0,CFI 0, VID 209
FwdOp:  0x10
NumOfEntries: 1
=================================

crrodriguez · 2022-06-09T16:23:18Z

LTE3415-SH+ is one of best in class hardware design of SFP GPON stick, it's version is industrial (up to +85 celsius) and it contains additional MCU that handles most of I2C operations (instead of passing through via 9601C)

We do our own sticks based on that hardware from Hisense, but our own firmware. Much newer SDK (Luna 3.3) and kernel 3.18.x + ofcourse our well modified OMCI stack for wide interoperability. The model is LXT-010S-H, and will be available soon.

All righty.. looking forward to a reasonably priced international shipping suplier to consider trying it.

marcinkuczera · 2022-06-09T18:07:17Z

I rather need extended vlan tag operations MIB, not a vlan filter.
If your firmware emulates 4x1G ONT - please send me complete:
omcicli mib get all

you say:

In my country, Fiber Vendor provide multiple ISP and provision only OMCI, since OLT need to support multiple brand of ONU, VLAN mapping is 1:1, PON bridge to ETH with VLAN aware

Provisioning via OMCI - ok, for such case, but this is mostly ONT vendors that take care of interoperability, very rarely OLT vendors... (would have to be like Orange France do discuss such case)..

I would be nice allow user to upload custom OMCI Profile, user can switch any OMCI Profile to spoof OLT
This is impossible.
The design is that OLT uploads at least some vlan-tagging-ops-config or extended-vlan-tagging-ops-confg to OLT + some supplementary objects. And these, strict config related objects are allowed only OLT->ONT.
It is only OLT that can do MIB_ADD, MIB_SET, MIB_DEL operations. ONT can only send back so called AVC (Attribute Value Change) information, and only if this is defined in MIB (parameter has AVC attribute).
AVC is used for example to send information about change of LAN port status (up/down) or if IP address of iphost has changed.. but there is no way to upload vlan config to OLT as this is impossible by design.

marcinkuczera · 2022-06-09T18:08:03Z

All righty.. looking forward to a reasonably priced international shipping suplier to consider trying it.

Where are you from ?

crrodriguez · 2022-06-09T18:46:47Z

All righty.. looking forward to a reasonably priced international shipping suplier to consider trying it.

Where are you from ?

Chile.. if sold in aliexpress or amazon or whatever international site will be fine.

marcinkuczera · 2022-06-09T19:19:17Z

All righty.. looking forward to a reasonably priced international shipping suplier to consider trying it.

Where are you from ?

Chile.. if sold in aliexpress or amazon or whatever international site will be fine.

Nice place, I'd been once in Santiago.

We have never sold anything on ebay or amazon... how do you handle taxes on small low value packages ? Is it as simple as registred letter ?

crrodriguez · 2022-06-09T19:34:05Z

All righty.. looking forward to a reasonably priced international shipping suplier to consider trying it.

Where are you from ?

Chile.. if sold in aliexpress or amazon or whatever international site will be fine.

Nice place, I'd been once in Santiago.

We have never sold anything on ebay or amazon... how do you handle taxes on small low value packages ? Is it as simple as registred letter ?

Well.. Im pretty sure that varies according to destination/origin amazon ships from US to Chile. DDP only. Ebay normally does DAP, some products go through ebay international program or something and those go DDP.. small stuff from ebay is usually sent via registered mail and takes quite a while to arrive, but it is cheap and customs seldom have the resources to check all mail so it is rarely taxed, but if you parcel is choosen for screeningit .. is a pain in the ass and will cost you quite some money and bureocracy.

I recommend for more than one stick or for business shipping to never send DAP or said differently avoid anything that does not have clear, whole process upfront fees. DHL, FEDEX , UPS charge some ridiculous exorbitant fees for whatever extra service they think they provide otherwise.

stich86 · 2022-06-09T20:08:51Z

All righty.. looking forward to a reasonably priced international shipping suplier to consider trying it.

Where are you from ?

Chile.. if sold in aliexpress or amazon or whatever international site will be fine.

Nice place, I'd been once in Santiago.

We have never sold anything on ebay or amazon... how do you handle taxes on small low value packages ? Is it as simple as registred letter ?

I'm also interested.. I'm from Italy

Anime4000 · 2022-06-10T12:05:31Z

@marcinkuczera

I rather need extended vlan tag operations MIB, not a vlan filter.
If your firmware emulates 4x1G ONT - please send me complete:
omcicli mib get all

Here putty.log (131KB)
putty.log

Provisioning via OMCI - ok, for such case, but this is mostly ONT vendors that take care of interoperability, very rarely OLT vendors... (would have to be like Orange France do discuss such case)..

OLT: ALCL (Nokia brand last I saw on Fiber Technician iPad)

I found my OLT behavior:

Using HG8240H5 Info HW_HWVER 168D.A: ALCL OLT just O5, provisioning, have internet with default RTKG value and software version.
Using G-240G-E Info HW_HWVER 3FE48153CBAA: ALCL OLT wont provision even O5, OMCI MIB detect OLT as 0x20202020 (Unknown OLT), Then flash set complete info, ALCL OLT authenticated,

based from that, I assume OLT are responsible for ONU interoperability, it seem Fiber Vendor configured all OLT to support many ONU brands

marcinkuczera · 2022-06-10T13:23:18Z

ALCL = Alcatel Lucent ISAM 7360 OLT. Today - it is Nokia, but in system still keeps ALCL ID.
if G-240G-E does not go to 05, that may be more complicate. Maybe PLOAM password is incorrect ?
There are different authentication methods, but most popular is GPON_SN.

Btw, one of my "legs" is regular telco operator ;)

Anime4000 · 2022-06-10T15:43:02Z

ALCL = Alcatel Lucent ISAM 7360 OLT. Today - it is Nokia, but in system still keeps ALCL ID. if G-240G-E does not go to 05, that may be more complicate. Maybe PLOAM password is incorrect ? There are different authentication methods, but most popular is GPON_SN.

Btw, one of my "legs" is regular telco operator ;)

PLOAM password is same,
I just change Huawei to Nokia ONU Hardware version, ALCL OLT act differently...

I feel Nokia OLT very troublesome, giving O5 even password is wrong... very stupid Nokia
saw my friend under Huawei OLT no issue even same Fiber Vendor....

dominiaz · 2022-06-10T18:28:56Z

How to flash V2801F_V1.9.0-220425.tar to Opton GP801R?

I have installed V1.9.0-191015 and there isn`t upgrade from webui avaiable.

I can only backup/restore settings.

AreYouLoco · 2022-06-10T18:51:07Z

@dominiaz login to the stick via telnet run flash set LAN_SDS_MODE 1 IMPORTANT!
And then go to http://192.168.1.1/upgrade.asp and place firmware there. Wait for it to flash and then wait around 5-10 minutes and reboot device. You should be greeted with brand new HTML5 login page made by @Anime4000

dominiaz · 2022-06-11T01:24:03Z

Thanks.

Does GP801R works with Mikrotik 4011 or 5009 in SFP+ slot?

I tried to put it to Huawei switch with SFP+ and it does`t work.

AreYouLoco · 2022-06-11T09:10:50Z

This I wont tell you but if it doesnt work try some development or beta version of RouterOS as it needs some newer kernel.

marcinkuczera · 2022-06-11T13:51:12Z

ALCL = Alcatel Lucent ISAM 7360 OLT. Today - it is Nokia, but in system still keeps ALCL ID. if G-240G-E does not go to 05, that may be more complicate. Maybe PLOAM password is incorrect ? There are different authentication methods, but most popular is GPON_SN.
Btw, one of my "legs" is regular telco operator ;)

PLOAM password is same, I just change Huawei to Nokia ONU Hardware version, ALCL OLT act differently...

I feel Nokia OLT very troublesome, giving O5 even password is wrong... very stupid Nokia saw my friend under Huawei OLT no issue even same Fiber Vendor....

You don't know what authentication method is used on OLT side. To find a reason of not getting to O5 requires lot of debugging on frames leve.
Do you know if SN phase is passed ? (O3-O4) ? Maybe there is a problem with ranging ?

Each OLT vendor has different, own OMCI implementation, and trust me, there are lot of issues on all platforms and all vendors say they do it the best way.. and my last debugging was related to.. Huawei OLT (successful).

dominiaz · 2022-06-12T10:35:26Z

I have tested GP801R (ver. V2801F_V1.9.0-220425) with MT 5009 and its working very well.

I am going to test 2.5Gb with CRS305-1G-4S+IN. Which LAN_SDS_MODE should I use to operate with GP801R with CRS305?

I don`t have UART so i am little scary before doing it...

stich86 · 2022-06-12T10:37:23Z

I have tested GP801R (ver. V2801F_V1.9.0-220425) with MT 5009 and its working very well.

I am going to test 2.5Gb with CRS305-1G-4S+IN. Which LAN_SDS_MODE should I use to operate with GP801R with CRS305?

I don`t have UART so i am little scary before doing it...

on my ODI LAN_SDS_MODE is set to 4, but we are talking about a different chip (RTL9601D), so take care.. you can screw up everything if the stick doesn't sync and the only was to restore is with UART

marcinkuczera · 2022-06-12T11:03:40Z

we are talking about a different chip (RTL9601D),

9601D and 9601C are almost the same.
Differences:

9601D has additional 1GBaseT PHY build in
9601D runs with faster clock (300MHz) while 9601C runs only 112MHz

SGMII/HiSGMII port - is the same, as well as PON port, switch chip, registers etc..

dominiaz · 2022-06-16T09:41:28Z

I have CRS305-1G-4S+IN (7.3.1 and routerboard firmware also 7.3.1) and Opton GP801R (ver. V2801F_V1.9.0-220425) died after:

`fix the SFP port to 2.5 without auto-neg:

set [ find default-name=sfp-sfpplus3 ] advertise=2500M-full auto-negotiation=no speed=2.5Gbps

On ODI stick, because there is no auto-neg, it's necessary to fix LAN_SDS_MODE to 4:

flash set LAN_SDS_MODE 4 ; reboot`

Mikrotik shows that 2.5G link ok, but there is no ping to the device after all.

Can you fix firmware with script "if LAN_SDS_MODE 4 fails after 15mins then it automatically switch to LAN_SDS_MODE 1?"

Anime4000 · 2022-06-16T12:21:10Z

@dominiaz
it's possible if you set sfp+ IP address 192.168.1.2

when ping failed 10 times, it revert back to 0 and reboot ..

dominiaz · 2022-06-16T12:34:12Z

I set 192.168.1.2/24 on sfp+ but the module does not reboot.

It even link 1G,2.5G,10G with no autonegotiation but it doesn`t ping anymore.

marcinkuczera · 2022-10-11T07:38:14Z

On 09/06/2022 13:53, stich86 wrote: LTE3415-SH+ is one of best in class hardware design of SFP GPON stick, it's version is industrial (up to +85 celsius) and it contains additional MCU that handles most of I2C operations (instead of passing through via 9601C) We do our own sticks based on that hardware from Hisense, but our own firmware. Much newer SDK (Luna 3.3) and kernel 3.18.x + ofcourse our well modified OMCI stack for wide interoperability. The model is LXT-010S-H, and will be available soon. Wow you are the same person on LaFibra for the Ethernet 2.5 ONT?

Yes :)

It will support HiSGMII on SFP?

It does, but SGMII/HISGMII does not support auto-detect, so once you set it to 2.5G and your SFP link is not up, you need to restore it via console (there are pads on PCB, but not most comfortable in use, ubiquiti's pads are better (with holes)).

Let us know when available :)

Delays delays delays... there is one production ongoing now, but there is also one large customer who will take most.. maybe I will keep some single box (5 units) for people from lafibre ;) But we alredy plan next manufacturing and - we DO HAVE chipsets on stock, so it will be quick. Regards, Marcin

…

— Reply to this email directly, view it on GitHub <#31 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AZRXNRX6USMAEYQSWOODK7DVOHLNLANCNFSM5VUGLUWQ>. You are receiving this because you commented.Message ID: ***@***.***>

qatar2030 · 2023-08-19T18:38:11Z

i have LEOX GPON STICK LXT-010S-H and it was working great with mikrotik rb5009 and when i change mode from flash set LAN_SDS_MODE 1 to flash set LAN_SDS_MODE 8 the sfp stop working any help please

Smotrov · 2023-12-03T11:32:28Z

Is anybody can help me to find where to find firmware update option in WebUI (or trough telnet).

Just can't find it anywhere...

vuducdong · 2023-12-03T12:23:43Z

Is anybody can help me to find where to find firmware update option in WebUI (or trough telnet).

Just can't find it anywhere...

On webui, enter the following address

192.168.1.1/upgrade.asp

Smotrov · 2023-12-03T13:07:47Z

Thank you @vuducdong!
I did upgraded firmware. But it seams I'm in trouble now :-(
Before upgrading firmware I checked LAN_SDS_MODE and set it to 1

# flash get LAN_SDS_MODE
LAN_SDS_MODE=5
# flash set LAN_SDS_MODE 1
LAN_SDS_MODE=1

After firmware update I was able to access WebUI / Telnet. And I decided to set LAN_SDS_MODE back to original 5.

After reboot I can not connect to my ISP, as well as access WebUI or telnet :-((

It shows some Tx when I set manual 2.5Gbps but with no access to ISP :-(

Is this SFP now bricked forever?

stich86 · 2023-12-04T09:32:58Z

V2801F's kernel doesn't support HiSGMII..

Only ODI, so now only way to recover the stick is using TTL

AreYouLoco · 2023-12-21T10:50:37Z

How to access UART on V2801F?

Anime4000 added the question Further information is requested label May 11, 2022

AreYouLoco closed this as not planned Won't fix, can't repro, duplicate, stale Sep 18, 2022

Opton GP801R OEM stick in Turris Omnia #31

Opton GP801R OEM stick in Turris Omnia #31

Comments

AreYouLoco commented May 11, 2022

Anime4000 commented May 11, 2022

AreYouLoco commented May 11, 2022 • edited

Anime4000 commented May 11, 2022

AreYouLoco commented May 11, 2022

AreYouLoco commented May 11, 2022 • edited

AreYouLoco commented May 11, 2022

AreYouLoco commented May 11, 2022 • edited

AreYouLoco commented May 11, 2022 • edited

tdmadam commented May 11, 2022 • edited

AreYouLoco commented May 11, 2022

tdmadam commented May 11, 2022

Anime4000 commented May 11, 2022 • edited

tdmadam commented May 12, 2022

Anime4000 commented May 12, 2022

tdmadam commented May 13, 2022

Anime4000 commented May 13, 2022

tdmadam commented May 13, 2022

vuducdong commented May 13, 2022 • edited

tdmadam commented May 13, 2022

crrodriguez commented May 13, 2022

AreYouLoco commented May 16, 2022

stich86 commented May 28, 2022

vuducdong commented May 29, 2022

stich86 commented May 30, 2022

vuducdong commented May 30, 2022

marcinkuczera commented Jun 9, 2022 • edited

stich86 commented Jun 9, 2022 • edited

Anime4000 commented Jun 9, 2022

marcinkuczera commented Jun 9, 2022

Anime4000 commented Jun 9, 2022

crrodriguez commented Jun 9, 2022

marcinkuczera commented Jun 9, 2022

marcinkuczera commented Jun 9, 2022

crrodriguez commented Jun 9, 2022

marcinkuczera commented Jun 9, 2022

crrodriguez commented Jun 9, 2022 • edited

stich86 commented Jun 9, 2022

Anime4000 commented Jun 10, 2022 • edited

marcinkuczera commented Jun 10, 2022

Anime4000 commented Jun 10, 2022

dominiaz commented Jun 10, 2022

AreYouLoco commented Jun 10, 2022 • edited

dominiaz commented Jun 11, 2022 • edited

AreYouLoco commented Jun 11, 2022 • edited

marcinkuczera commented Jun 11, 2022

dominiaz commented Jun 12, 2022

stich86 commented Jun 12, 2022

marcinkuczera commented Jun 12, 2022

dominiaz commented Jun 16, 2022 • edited

Anime4000 commented Jun 16, 2022

dominiaz commented Jun 16, 2022 • edited

marcinkuczera commented Oct 11, 2022 via email

qatar2030 commented Aug 19, 2023

Smotrov commented Dec 3, 2023

vuducdong commented Dec 3, 2023

Smotrov commented Dec 3, 2023 • edited

stich86 commented Dec 4, 2023

AreYouLoco commented Dec 21, 2023

AreYouLoco commented May 11, 2022 •

edited

AreYouLoco commented May 11, 2022 •

edited

AreYouLoco commented May 11, 2022 •

edited

AreYouLoco commented May 11, 2022 •

edited

tdmadam commented May 11, 2022 •

edited

Anime4000 commented May 11, 2022 •

edited

vuducdong commented May 13, 2022 •

edited

marcinkuczera commented Jun 9, 2022 •

edited

stich86 commented Jun 9, 2022 •

edited

crrodriguez commented Jun 9, 2022 •

edited

Anime4000 commented Jun 10, 2022 •

edited

AreYouLoco commented Jun 10, 2022 •

edited

dominiaz commented Jun 11, 2022 •

edited

AreYouLoco commented Jun 11, 2022 •

edited

dominiaz commented Jun 16, 2022 •

edited

dominiaz commented Jun 16, 2022 •

edited

Smotrov commented Dec 3, 2023 •

edited