DFP-34X-2C2 not reporting some stats (temperature, Tx Bias Current, etc) to Mikrotik RB4011iGS+ #99

rndm2 · 2022-11-26T23:03:59Z

Any chances to get it working?

Mikrotik RB4011iGS+
DFP-34X-2C2 with M110_sfp_ODI_220923 firmware

The text was updated successfully, but these errors were encountered:

rajkosto · 2022-11-27T02:16:09Z

Duplicate of #87
this stick only has static EEPROM linked to SFP so no, it cannot be changing in realtime
use the management webgui to read the rx/tx level, RX LOSS is reported via SFP though

rndm2 · 2022-11-27T09:38:40Z

Maybe there are some options to get those stats via console?
I want to add it to Zabbix monitoring

Anime4000 · 2022-11-27T14:02:44Z

Maybe there are some options to get those stats via console? I want to add it to Zabbix monitoring

You could by telnet then query by calling diag then close.

this got me thinking... if possible put basic status at login page then curl then result?

rajkosto · 2022-11-27T14:05:11Z

probably easier to remove logon check for the status page itself ?

Anime4000 · 2022-11-27T14:17:46Z

that need to patch mini webserver bin file 😆
so, modify login.asp and put basic status there

rndm2 · 2022-11-27T17:23:30Z

Heh. No vi, nano, etc on this SFP.
How do you guys modify files?
upd: RO file system.
This wouldn't be easy

Anime4000 · 2022-11-27T19:26:36Z

just usual way, I have make some script to run firmware on local computer, that way you can modify the firmware then flash it
https://github.com/Anime4000/RTL960x/tree/main/Tools/emulator

skon77 · 2022-11-28T14:23:17Z

Maybe there are some options to get those stats via console? I want to add it to Zabbix monitoring

via Telnet, e.g.:

> diag pon get transceiver bias-current
Bias Current: 10.936000 mA

> diag pon get transceiver part-number
Part Number: RTL8290

> diag pon get transceiver rx-power
Rx Power: -24.559320 dBm

> diag pon get transceiver temperature
Temperature: 85.000000 C

> diag pon get transceiver tx-power
Tx Power: -14.46720 inf dBm

> diag pon get transceiver vendor-name
Vendor Name: REALTEK

> diag pon get transceiver voltage
Voltage: 3.019400 V

> diag gpon get onu-state
ONU state: Operation State(O5)

> omcicli get onuid
ONU ID: 65

> omcicli get state
ONU state: 5

ToTheCLI · 2022-11-28T20:27:33Z

pon get transceiver temperature
Temperature: 58.625000 C

diag pon get transceiver temperature Temperature: 85.000000 C

Your Temps seem too high!!

skon77 · 2022-11-28T20:59:13Z

This is just an example. Temperature such as of Dlink DPN-100 SFP. This is a very hot stick.

My stick:
> diag pon get transceiver temperature
pon get transceiver temperature
Temperature: 25.078125 C

Although this is also far from reality. The temperature feels much higher on the case.

rndm2 · 2022-11-29T10:39:25Z

Where do you guys get new firmwares? Manufacturer not answering emails and don't have firmwares on website :(

skon77 · 2022-11-29T11:24:01Z

Where do you guys get new firmwares? Manufacturer not answering emails and don't have firmwares on website :(

Mostly from new stick shipments and ROM dump.

rndm2 · 2022-12-03T12:31:07Z

Fast and dirty solution to send data to Zabbix using zabbix_sender.
In order to get it working you need:

Expose SFP admin area port to Zabbix server, in my case it 8555 and Zabbix self-hosted
Create Zabbix trapper items with corresponding names and data types (numeric float)

random@random:~/zabbix-bcn-sfp$ cat sfp-login.sh 
#!/bin/bash
curl 'http://your.hostname:8555/boaform/admin/formLogin' \
  -H 'Accept: text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.9' \
  -H 'Accept-Language: en' \
  -H 'Cache-Control: no-cache' \
  -H 'Connection: keep-alive' \
  -H 'Content-Type: application/x-www-form-urlencoded' \
  -H 'DNT: 1' \
  -H 'Origin: http://10.10.100.100' \
  -H 'Pragma: no-cache' \
  -H 'Referer: http://10.10.100.100/admin/login.asp' \
  -H 'Upgrade-Insecure-Requests: 1' \
  -H 'User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/108.0.0.0 Safari/537.36' \
  --data-raw 'challenge=&username=admin&password=39383737373ff&save=Login&submit-url=%2Fadmin%2Flogin.asp' \
  --compressed \
  --insecure
random@random:~/zabbix-bcn-sfp$ cat sfp-data.sh 
#!/bin/bash
curl 'http://your.hostname:8555/status_pon.asp' \
  -H 'Accept: text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.9' \
  -H 'Accept-Language: en' \
  -H 'Cache-Control: no-cache' \
  -H 'Connection: keep-alive' \
  -H 'DNT: 1' \
  -H 'Pragma: no-cache' \
  -H 'Upgrade-Insecure-Requests: 1' \
  -H 'User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/108.0.0.0 Safari/537.36' \
  --compressed \
  --insecure
random@random:~/zabbix-bcn-sfp$ cat get-data.sh 
#!/bin/bash
./sfp-login.sh
./sfp-data.sh => data.html
awk  -F '[<>]' '/<td / { gsub(/<b>/, ""); sub(/ .*/, "", $3); print $5 } ' data.html > parsed.txt
rm ./data.html

random@random:~/zabbix-bcn-sfp$ cat send-data.sh 
#!/bin/bash
/usr/bin/zabbix_sender -z 127.0.0.1 -s "your.hostname" -k dfp34x2c2.temperature -o $(sed '7!d' parsed.txt | grep -o '[0-9.]\+')
/usr/bin/zabbix_sender -z 127.0.0.1 -s "your.hostname" -k dfp34x2c2.voltage -o $(sed '9!d' parsed.txt | grep -o '[0-9.]\+')
/usr/bin/zabbix_sender -z 127.0.0.1 -s "your.hostname" -k dfp34x2c2.tx.power -o $(sed '11!d' parsed.txt | grep -o '[0-9.]\+')
/usr/bin/zabbix_sender -z 127.0.0.1 -s "your.hostname" -k dfp34x2c2.rx.power -o $(sed '13!d' parsed.txt | grep -o '[0-9.]\+')
/usr/bin/zabbix_sender -z 127.0.0.1 -s "your.hostname" -k dfp34x2c2.bias.current -o $(sed '15!d' parsed.txt | grep -o '[0-9.]\+')

random@random:~/zabbix-bcn-sfp$ cat exec.sh 
#!/bin/bash
cd /home/random/zabbix-bcn-sfp
./get-data.sh
./send-data.sh

And put it to cron of course

nguyenthanhhong-tg · 2023-01-02T16:55:13Z

Any chances to get it working?

Mikrotik RB4011iGS+ DFP-34X-2C2 with M110_sfp_ODI_220923 firmware

What version of your MikroTik? If you are in version 6, you will see all information, but on version, you will not see anything.

rndm2 · 2023-01-02T16:57:00Z

What version of your MikroTik? If you are in version 6, you will see all information, but on version, you will not see anything.

7.6

nguyenthanhhong-tg · 2023-01-02T17:12:02Z

What version of your MikroTik? If you are in version 6, you will see all information, but on version, you will not see anything.

7.6

Can you try to downgrade to version 6.48.6 and check again?

zentavr · 2023-03-29T19:34:24Z

@nguyenthanhhong-tg it shows nothing at 6.x and 7.x. Just tested with my router today.

nguyenthanhhong-tg · 2023-03-30T01:13:27Z

Understood your issue. I also own a RB4011iGS+RM. It is very difficult to recognize the SFP stick, especially SFP GPON stick. In some case, I must disable auto negotiation, and force speed at 1Gbps so that it can bring sfp-sfpplus1 up.

zentavr · 2023-03-30T02:06:56Z

I did not change any speed setting at the ODI stick and have Auto Negotiation with Mikrotik. Works fine so far.

smnrock · 2023-06-28T16:18:07Z

I'm not good at Mikrotik scripts, but made a dirty solution to read the status from webgui and send through telegram for every one hour. It works well for me.

#/log info "gponhealth start"
:do {
/tool fetch url="http://192.168.1.1/boaform/admin/formLogin?username=admin&password=xxxxx&save=Login&submit-url=^%^2Fadmin^%^2Flogin.asp" keep-result=no 
} on-error={ :put "login failed"};
:delay 2s
#/log info "gponhealth login"
/tool fetch url="http://192.168.1.1/status_pon.asp" keep-result=yes
#/log info "gponhealth ponstatus"
:delay 6s
:local statuscontent [/file get status_pon.asp contents];
:local statusf [:pick $statuscontent 1086 1097];
:local statusfinal ("GPON-Status\nTemperature = " .$statusf);
:set statusf [:pick $statuscontent 1218 1228];
:set statusfinal ($statusfinal . "\nVoltage = " . $statusf);
:set statusf [:pick $statuscontent 1350 1363];
:set statusfinal ($statusfinal . "\nTx Power = " . $statusf);
:set statusf [:pick $statuscontent 1485 1500];
:set statusfinal ($statusfinal . "\nRx Power = " . $statusf);
:set statusf [:pick $statuscontent 1626 1638];
:set statusfinal ($statusfinal . "\nBias Current = " . $statusf);
#/log info $statusfinal;
:local pload "chat_id=-xxxxxxxx&text=$statusfinal"
#/log info "before fetch"
/tool fetch mode=https http-method=post http-data=$pload url="https://api.telegram.org/botXXXXXXX/sendMessage" keep-result=no;
#/log info "gponhealth script `completed"

Create a scheduler for every one hour or so, it will send message to telegram.

Anime4000 · 2023-06-28T16:53:59Z

wow this is very nice, I add this on the README.md about reading GPON ONU SFP status.

smnrock · 2023-06-28T17:21:26Z

Thanks.

Just an additional note. This is for the people who were not well versed in to scripts, Please replace your onu password, telegram chatid and botid accordingly in the above script.

Strykar · 2024-01-23T05:54:39Z

Please report this upstream so it may be fixed instead of here, no?

Anime4000 · 2024-01-25T03:10:42Z

HSGQ/ODI still use Static EEPROM, best way is this for now
@smnrock

Strykar · 2024-01-26T06:02:28Z

I wrote a Prometheus collector to grok the SFP SoC and optical signal stats via HTML and plot the data in Grafana since I use Telegram for alerting, not monitoring.

Put the collector somewhere in your $PATH and create a systemd user service and start / enable the service.
The collector runs as a simple web server on port 8000, you can view what it's exporting by curl -L http://localhost:8000.

# /home/strykar/.config/systemd/user/odi.service
[Unit]
Description=Prometheus collector for the HSGQ / ODI GPON SFP
After=network-online.target

[Service]
Type=simple
ExecStart=/usr/bin/python3 /home/strykar/.bin/hsgq_prometheus_collector.py

[Install]
WantedBy=default.target

Add the collector to Prometheus under any existing scrape_configs::

  - job_name: "gpon_collector"
    scrape_interval: 5m  # Adjust this to how frequently you want Prometheus to scrape metrics
    static_configs:
      - targets: ["localhost:8000"]

Ensure Grafana can poll Prometheus and create a dashboard in Grafana:

Anime4000 · 2024-01-29T14:22:40Z

Nice @Strykar !

I add this into README.md for GPON Stats via Grafana

jjeziorny · 2024-02-12T11:11:21Z

HI @Strykar , how do we handle authentication to the GPON with your collector script?

The web interface does not allow unauthenticated access, I've tried basic authentication (adding user:pass) to the URL but that doesn't work

Strykar · 2024-02-12T12:24:12Z

@jjeziorny Web auth is convoluted with MD5 hashing, I have been unable to login to the web interface via terminal.
If you find and post the md5.js file used during the login process, I can try to add authentication to the current collector.

I found that it does not log me out for hours, so just signing in once per day manually for now does the trick.
If login via script is not possible, I will move the script to auth over SSH and poll the data from the terminal.

smnrock · 2024-02-12T12:45:06Z

@Strykar you can try using the url format with login details appended like the one i gave in the mikrotik script above.

Strykar · 2024-02-13T09:15:52Z

If only HSGQ released source code.

jjeziorny · 2024-02-13T09:49:51Z

btw, at some point if you have the time you can add command line arguments to it so people can set IP, password and listener port without having to edit the script.

In my case I had to create two scripts as I have two GPONs in my network.

Strykar · 2024-02-15T01:43:21Z

These two commands appear to be ODI specific and do not work with the HSGQ firmware (V1.0-220923):

# omcicli get onuid
# omcicli get state

Usage: omcicli get [cmd]

  sn        : get serial number
  log       : get runtime log level
  logfile   : get omci msg log mode/action mask
  tables    : get all registered MIB tables
  devmode   : get omci device mode
  dmmode    : get dual mgmt mode
  loid      : get loid and password
  loidauth  : get loid auth status
  cflag     : get customized flag
  authuptime    : get auth uptime

Any idea how to get this info on the HSGQ firmware via terminal?
@jjeziorny Yea I'll flesh that out in the SSH version I am working on, did not think to support multiple GPONs at first.

Strykar · 2024-02-16T00:53:26Z

@jjeziorny New prometheus collector that uses SSH instead of parsing HTML - https://gist.github.com/Strykar/584c6467ed023f90b13a059f511d4d1c and can deal with multiple SFPs.

jjeziorny · 2024-02-16T07:54:37Z

@jjeziorny New prometheus collector that uses SSH instead of parsing HTML - https://gist.github.com/Strykar/584c6467ed023f90b13a059f511d4d1c and can deal with multiple SFPs.

OK, just switched to it and seems to be running fine.

# ps aux
USER         PID %CPU %MEM     VSZ    RSS TT  STAT STARTED    TIME COMMAND
root       14537  5.2  0.4   57352  32112  -  SJ   08:52   0:00.24 /usr/local/bin/python3 /root/hsgq_prometheus_collector.py --hostname 192.168.2.5 --port 22 --user admin --password xxxx --webserver-port 8001 (python3.9)
root       14530  2.2  0.4   57352  32108  -  SJ   08:52   0:00.24 /usr/local/bin/python3 /root/hsgq_prometheus_collector.py --hostname 192.168.2.1 --port 22 --user admin --password xxxx --webserver-port 8000 (python3.9)
root       14529  0.0  0.0   12816   2200  -  SsJ  08:52   0:00.00 daemon: /usr/local/bin/python3[14530] (daemon)
root       14536  0.0  0.0   12816   2200  -  SsJ  08:52   0:00.00 daemon: /usr/local/bin/python3[14537] (daemon)

Strykar · 2024-02-16T10:07:30Z

Cool, it can work via just one process BTW:

/usr/bin/python hsgq_prometheus_collector.py \
    --hostname 192.168.1.1 --port 22 --user admin --password pass1 \
    --hostname 192.168.1.2 --port 22 --user admin --password pass2

jjeziorny · 2024-02-19T09:12:52Z

Hi @Strykar ,
After not having much time over the weekend to tweak things I finally got a change this morning. But run into some issues.

CPU/MEM stats not available on the SSH version
GPON state was always comming 0
SFP only allows a single SSH connection, therefore if you are SSH'ed into the device the script would fail to connect.

So, based on point 3 I don't think it's a good ideal to collect these via SSH

I've reverted back to the HTTP version for now

Strykar · 2024-02-20T06:42:07Z

There's no point in an HTTP version, here's a small example of stats that could be pulled by using SSH:

# diag gpon get ?
gpon get 
active-timer                                     - activation timer configuration
aes-framecnt                                     - AES frame counter
alarm-status                                     - current alarm status
auto-boh                                         - auto update BOH configuration
auto-tcont                                       - auto add or delete tcont configuration
bwmap                                            - bwmap
dbru-block-size                                  - dbru block size
ds-bwmap                                         - downstream BWMAP configuration
ds-eth                                           - downstream ethernet configuration
ds-flow                                          - downstream flow configuration
ds-gem                                           - downstream GEM configuration
ds-laser                                         - downstream laser configuration
ds-omci                                          - downstream OMCI configuration
ds-phy                                           - downstream PHY configuration
ds-ploam                                         - downstream PLOAM configuration
eqd-offset                                       - EQD offset configuration
multicast-filter                                 - multicast filter configuration
multicast-filter-entry                           - multicast filter entry configuration
onu-state                                        - ONU state, O1-O7
password                                         - password configuration
password-hex                                     - password configuration
pps-cnt                                          - PPS cnt information
rdi                                              - RDI configuration
rogue-sd-cnt                                     - rogue ont SD cnt information
serial-number                                    - serial number configuration
serial-number-hex                                - serial number configuration
serialnumber                                     - serial number configuration
tcont                                            - TCONT configuration
tx                                               - transmit configuration
us-dbr                                           - upstream DBR configuration
us-flow                                          - upstream flow configuration
us-laser                                         - upstream laser configuration
us-phy                                           - upstream PHY configuration
us-ploam                                         - upstream PLOAM configuration

There are a bajillion more metrics available via the terminal:

# diag ?

acl                                              - acl configuration
auto-fallback                                    - Auto-Fallback configuration
bandwidth                                        - bandwidth configuration
classf                                           - classification configuration
cpu                                              - cpu configuration
debug                                            - debug configuration
dot1x                                            - dot1x configuration
epon                                             - epon configuration
exit                                             - exit diag shell
field-selector                                   - field selector configuration
flowctrl                                         - flowctrl configuration
gpon                                             - GPON configuration
i2c                                              - I2C configuration
igmp                                             - igmp configuration
interrupt                                        - interrupt configuration
iol                                              - iol configuration
l2-table                                         - l2 table configuration
l34                                              - L34 configuration
led                                              - led configuration
meter                                            - shared meter configuration
mib                                              - mib configuration
mirror                                           - mirror configuration
oam                                              - oam  configuration
pbo                                              - pbo configuration
pon                                              - pon configuration
port                                             - port configuration
ppstod                                           - ppstod configuration
qos                                              - qos configuration
register                                         - register configuration
rldp                                             - rldp configuration
rlpp                                             - RLPP configuration
rma                                              - rma configuration
security                                         - security configuration
storm-control                                    - storm-control configuration
stp                                              - stp configuration
svlan                                            - svlan configuration
switch                                           - switch configuration
time                                             - time configuration
trap                                             - trap configuration
trunk                                            - trunk configuration
vlan                                             - vlan configuration

Use what works for now, I will keep updating the collector and dashboard as I get time since I intend to track these metrics, especially the receive signal.
IIRC, the web interface restricts you to one user too.

ffxenon · 2024-03-06T07:06:23Z

Made some modification on @smnrock 's RouterOS script.

:local ponip "http://<your own PON IP>"
:local s1 1086

:local ulogin ($ponip."/boaform/admin/formLogin?username=admin&password=admin&save=Login&submit-url=^%^2Fadmin^%^2Flogin.asp")
:local ustatus ($ponip."/status_pon.asp")
:local ulogout ($ponip."/boaform/admin/formLogout")

:do {
/tool fetch url=$ulogin keep-result=no
:delay 2s
} on-error={
:delay 2s
/tool fetch url=$ulogin keep-result=no
}
:local result [/tool fetch url=$ustatus as-value output=user];
:delay 1s
:local PonTemp [:pick [:pick $result 0] $s1 (s1+2)];
/log info ("PON ----------------- Temperature = ".$PonTemp);
:local CpuTemp [/sys hea get 1 value]
/log info ("CPU ----------------- Temperature = ".$CpuTemp);
/tool fetch url=$ulogout keep-result=no

risingphoenix23 · 2024-03-11T15:09:51Z

@Strykar connect with me over email airs.prime1@gmail.com
will buy the industrial hsgq ones.

longthanhtran · 2024-05-22T02:06:11Z

suddenly see my edgerouter shows details about my DFP-34X-2C2 today, not sure if it's correct or not.

Anime4000 · 2024-05-22T03:58:16Z

that's correct

Strykar · 2024-05-31T20:11:52Z

suddenly see my edgerouter shows details about my DFP-34X-2C2 today, not sure if it's correct or not.

What hardware revision is your ODI SFP?

longthanhtran · 2024-06-01T04:48:30Z

no idea, I only know its fw version, V1.0-220923

Anime4000 · 2024-06-01T16:57:08Z

no idea, I only know its fw version, V1.0-220923

Look at SFP Pin/Pad, it would write like:
STICK3V06

vuducdong · 2024-06-01T23:52:34Z

no idea, I only know its fw version, V1.0-220923

Look at SFP Pin/Pad, it would write like:
STICK3V06

It's stick V06.

Anime4000 · 2024-06-02T04:01:17Z

welp, need V08 to have DDM

risingphoenix23 · 2024-06-02T04:57:10Z

Yes We need to Have V8 For DDM

…

On Sun, Jun 2, 2024, 9:31 AM Anime4000 ***@***.***> wrote: welp, need V08 to have DDM — Reply to this email directly, view it on GitHub <#99 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BGXZFBWTFQSTIMCRM5MPKVTZFKKKHAVCNFSM6AAAAAASMGWCN2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNBTGY4DOMZZGA> . You are receiving this because you commented.Message ID: ***@***.***>

canope-25 · 2024-06-02T08:15:57Z

welp, need V08 to have DDM

Hi , hope you're all well.

What are the differences / changes between the V06 and the V08 ? ( beside the DDM part)

Thank you in advance for the answer.

risingphoenix23 · 2024-06-02T08:19:36Z

Nothing except the DDM just add 4 USD To the price for the V8

…

On Sun, Jun 2, 2024, 1:46 PM canope-25 ***@***.***> wrote: welp, need V08 to have DDM Hi , hope you're all well. What are the differences / changes between the V06 and the V08 ? ( beside the DDM part) Thank you in advance for the answer. — Reply to this email directly, view it on GitHub <#99 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BGXZFBSKWWBUMNZWUBMN4WDZFLIFJAVCNFSM6AAAAAASMGWCN2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNBTG42DKNZYGI> . You are receiving this because you commented.Message ID: ***@***.***>

canope-25 · 2024-06-02T09:12:31Z

I paid a V6 stick 26 $ VATIN ( 20% since in Europe )
So maybe more than 4 USD

Nothing except the DDM just add 4 USD To the price for the V8

welp, need V08 to have DDM

Hi , hope you're all well.

What are the differences / changes between the V06 and the V08 ? ( beside

the DDM part)

Thank you in advance for the answer.

rndm2 · 2024-06-02T09:20:27Z

So, did I get it correctly.
If I buy new stick (from fibershop?) it will report stats as it supposed to do?

risingphoenix23 · 2024-06-02T10:47:11Z

Why don't you try to contact hsgq directly?

…

On Sun, Jun 2, 2024, 2:50 PM rndm2 ***@***.***> wrote: So, did I get it correctly. If I buy new stick (from fibershop?) it will report stats as it supposed to do? — Reply to this email directly, view it on GitHub <#99 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BGXZFBXMCLOSJMNRGDRESF3ZFLPXFAVCNFSM6AAAAAASMGWCN2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNBTG43DQOJSGM> . You are receiving this because you commented.Message ID: ***@***.***>

risingphoenix23 · 2024-06-02T10:47:33Z

Different prices for different clients I guess

…

On Sun, Jun 2, 2024, 2:42 PM canope-25 ***@***.***> wrote: I paid V6 26 $ VATIN ( 20% since in Europe ) So maybe more than 4 USD Nothing except the DDM just add 4 USD To the price for the V8 On Sun, Jun 2, 2024, 1:46 PM canope-25 *@*.***> wrote: welp, need V08 to have DDM Hi , hope you're all well. What are the differences / changes between the V06 and the V08 ? ( beside the DDM part) Thank you in advance for the answer. — Reply to this email directly, view it on GitHub #99 (comment) <#99 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/BGXZFBSKWWBUMNZWUBMN4WDZFLIFJAVCNFSM6AAAAAASMGWCN2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNBTG42DKNZYGI . You are receiving this because you commented.Message ID: *@*.***> — Reply to this email directly, view it on GitHub <#99 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BGXZFBU34PPMLQMDTEQIGATZFLOZNAVCNFSM6AAAAAASMGWCN2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNBTG43DMMZRHA> . You are receiving this because you commented.Message ID: ***@***.***>

canope-25 · 2024-06-02T11:16:37Z

I'm interested , what is the price of the V08 ?

Different prices for different clients I guess

risingphoenix23 · 2024-06-02T11:43:57Z

I got it for 34 USD a month ago but if you add customs and shipping it goes high to 45 USD.

…

On Sun, Jun 2, 2024, 4:47 PM canope-25 ***@***.***> wrote: I'm interested , what is the price of the V08 ? Different prices for different clients I guess — Reply to this email directly, view it on GitHub <#99 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BGXZFBTKU45YTIDKAJNXFV3ZFL5K3AVCNFSM6AAAAAASMGWCN2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNBTHAYDONZZHA> . You are receiving this because you commented.Message ID: ***@***.***>

canope-25 · 2024-06-02T13:21:55Z

Thank you so , nothing beside the DDM part , no improvement regarding the laser / receive sensitivity ?
Still -28dbm receive ? +4dbm max transmit ?
Still 2.5 watt of consumption ?

I'm interested if you have a spec doc.
Thank you

I got it for 34 USD a month ago but if you add customs and shipping it goes

high to 45 USD.

On Sun, Jun 2, 2024, 4:47 PM canope-25 ***

I'm interested , what is the price of the V08 ?

Different prices for different clients I guess

rndm2 · 2024-06-02T14:24:16Z

I think with the release of the new stick this thread is basically resolved.

longthanhtran · 2024-06-02T23:57:49Z

sorry for commenting on closed issue but just want to update a little bit, my sfp is V6 and I think the value on edgerouter is not true. It's nice to have feature but not mandatory as long as it functions correctly, stable.

rndm2 changed the title ~~DFP-34X-2C2 not reporting some stats (temperature, Tx Bias Current, etc)~~ DFP-34X-2C2 not reporting some stats (temperature, Tx Bias Current, etc) to Mikrotik RB4011iGS+ Nov 26, 2022

rndm2 closed this as completed Jun 2, 2024

DFP-34X-2C2 not reporting some stats (temperature, Tx Bias Current, etc) to Mikrotik RB4011iGS+ #99

DFP-34X-2C2 not reporting some stats (temperature, Tx Bias Current, etc) to Mikrotik RB4011iGS+ #99

Comments

rndm2 commented Nov 26, 2022 • edited Loading

rajkosto commented Nov 27, 2022 • edited Loading

rndm2 commented Nov 27, 2022

Anime4000 commented Nov 27, 2022

rajkosto commented Nov 27, 2022

Anime4000 commented Nov 27, 2022

rndm2 commented Nov 27, 2022 • edited Loading

Anime4000 commented Nov 27, 2022

skon77 commented Nov 28, 2022 • edited Loading

ToTheCLI commented Nov 28, 2022

skon77 commented Nov 28, 2022 • edited Loading

rndm2 commented Nov 29, 2022

skon77 commented Nov 29, 2022

rndm2 commented Dec 3, 2022 • edited Loading

nguyenthanhhong-tg commented Jan 2, 2023 • edited Loading

rndm2 commented Jan 2, 2023

nguyenthanhhong-tg commented Jan 2, 2023

zentavr commented Mar 29, 2023

nguyenthanhhong-tg commented Mar 30, 2023

zentavr commented Mar 30, 2023

smnrock commented Jun 28, 2023

Anime4000 commented Jun 28, 2023

smnrock commented Jun 28, 2023 • edited Loading

Strykar commented Jan 23, 2024

Anime4000 commented Jan 25, 2024

Strykar commented Jan 26, 2024 • edited Loading

Anime4000 commented Jan 29, 2024

jjeziorny commented Feb 12, 2024

Strykar commented Feb 12, 2024 • edited Loading

smnrock commented Feb 12, 2024

Strykar commented Feb 13, 2024

jjeziorny commented Feb 13, 2024

Strykar commented Feb 15, 2024 • edited Loading

Strykar commented Feb 16, 2024

jjeziorny commented Feb 16, 2024

Strykar commented Feb 16, 2024

jjeziorny commented Feb 19, 2024

Strykar commented Feb 20, 2024 • edited Loading

ffxenon commented Mar 6, 2024

risingphoenix23 commented Mar 11, 2024

longthanhtran commented May 22, 2024

Anime4000 commented May 22, 2024

Strykar commented May 31, 2024

longthanhtran commented Jun 1, 2024

Anime4000 commented Jun 1, 2024

vuducdong commented Jun 1, 2024

Anime4000 commented Jun 2, 2024

risingphoenix23 commented Jun 2, 2024 via email

canope-25 commented Jun 2, 2024

risingphoenix23 commented Jun 2, 2024 via email

canope-25 commented Jun 2, 2024 • edited Loading

rndm2 commented Jun 2, 2024

risingphoenix23 commented Jun 2, 2024 via email

risingphoenix23 commented Jun 2, 2024 via email

canope-25 commented Jun 2, 2024

risingphoenix23 commented Jun 2, 2024 via email

canope-25 commented Jun 2, 2024

rndm2 commented Jun 2, 2024

longthanhtran commented Jun 2, 2024

rndm2 commented Nov 26, 2022 •

edited

Loading

rajkosto commented Nov 27, 2022 •

edited

Loading

rndm2 commented Nov 27, 2022 •

edited

Loading

skon77 commented Nov 28, 2022 •

edited

Loading

skon77 commented Nov 28, 2022 •

edited

Loading

rndm2 commented Dec 3, 2022 •

edited

Loading

nguyenthanhhong-tg commented Jan 2, 2023 •

edited

Loading

smnrock commented Jun 28, 2023 •

edited

Loading

Strykar commented Jan 26, 2024 •

edited

Loading

Strykar commented Feb 12, 2024 •

edited

Loading

Strykar commented Feb 15, 2024 •

edited

Loading

Strykar commented Feb 20, 2024 •

edited

Loading

canope-25 commented Jun 2, 2024 •

edited

Loading