Honeybadger

This is the notifier gem for integrating apps with the ⚡ Honeybadger Exception Notifier for Ruby and Rails.

When an uncaught exception occurs, Honeybadger will POST the relevant data to the Honeybadger server specified in your environment.

Rails Installation

Add the Honeybadger gem to your gemfile:

gem 'honeybadger'

Then generate the initializer:

rails generate honeybadger --api-key <Your Api Key>

If you prefer to manually create the initializer, that's simple enough. Just put the code below in config/initializers/honeybadger.rb

Honeybadger.configure do |config|
  config.api_key = '[your-api-key]'
end

That's it!

Rails 2.x

Add the honeybadger gem to your app. In config/environment.rb:

config.gem 'honeybadger'

or if you are using bundler:

gem 'honeybadger', :require => 'honeybadger/rails'

Then from your project's RAILS_ROOT, and in your development environment, run:

rake gems:install
rake gems:unpack GEM=honeybadger

As always, if you choose not to vendor the honeybadger gem, make sure every server you deploy to has the gem installed or your application won't start.

Finally, create an initializer in config/initializers and configure your API key for your project:

require 'honeybadger/rails'
Honeybadger.configure do |config|
  config.api_key = '[your-api-key]'
end

Rack

In order to use honeybadger in a non-Rails rack app, just load honeybadger, configure your API key, and use the Honeybadger::Rack middleware:

require 'rack'
require 'honeybadger'

Honeybadger.configure do |config|
  config.api_key = 'my_api_key'
end

app = Rack::Builder.app do
  run lambda { |env| raise "Rack down" }
end

use Honeybadger::Rack
run app

Sinatra

Using honeybadger in a Sinatra app is just like a Rack app:

require 'sinatra'
require 'honeybadger'

Honeybadger.configure do |config|
  config.api_key = 'my api key'
end

use Honeybadger::Rack

get '/' do
  raise "Sinatra has left the building"
end

Additional integrations:

• Catch exceptions in Resque jobs
• Sidekiq - Simple, efficient message processing for Ruby (supports Honeybadger natively)

Usage

For the most part, Honeybadger works for itself.

It intercepts the exception middleware calls, sends notifications and continues the middleware call chain.

If you want to log arbitrary things which you've rescued yourself from a controller, you can do something like this:

...
rescue => ex
  notify_honeybadger(ex)
  flash[:failure] = 'Encryptions could not be rerouted, try again.'
end
...

The #notify_honeybadger call will send the notice over to Honeybadger for later analysis. While in your controllers you use the notify_honeybadger method, anywhere else in your code, use Honeybadger.notify.

To perform custom error processing after Honeybadger has been notified, define the instance method #rescue_action_in_public_without_honeybadger(exception) in your controller.

You can test that Honeybadger is working in your production environment by using this rake task (from RAILS_ROOT):

rake honeybadger:test

If everything is configured properly, that task will send a notice to Honeybadger which will be visible immediately.

Ignored environments

Please note that in development mode, Honeybadger will not be notified of exceptions that occur, except when running the test rake task. The following environments are ignored by default: development, test, and cucumber. You can modify which environments are ignored by setting the development_environments option in your Honeybadger initializer:

Honeybadger.configure do |config|
  ...
  # To add an additional environment to be ignored:
  config.development_environments << 'staging'

  # To override the default environments completely:
  config.development_environments = ['test', 'cucumber']
end

If you choose to override the development_environments option for whatever reason, please make sure your test environments are ignored.

Sending custom data

Honeybadger allows you to send custom data using Honeybadger.context. Here's an example of sending some user-specific information in a Rails before_filter call:

before_filter do
  Honeybadger.context({
    :user_id => current_user.id,
    :user_email => current_user.email
  }) if current_user
end

Now, whenever an error occurs, Honeybadger will display the affected user's id and email address, if available.

Subsequent calls to context will merge the existing hash with any new data, so you can effectively build up context throughout your request's life cycle. Honeybadger will discard the data when a request completes, so that the next request will start with a blank slate.

Tracking deploys

Honeybadger has an API to keep track of project deployments. Whenever you deploy, all errors for that environment will be resolved automatically. You can choose to enable or disable the auto-resolve feature from your Honeybadger project settings page.

We officially support deploy tracking using Capistrano and Heroku:

Capistrano

In order to track deployments using Capistrano, simply require Honeybadger's Capistrano task in your config/deploy.rb file:

require 'honeybadger/capistrano'

If you ran the Honeybadger install generator in a project that was previously configured with Capistrano, we already added this for you.

The Capistrano task will run our rake honeybadger:deploy task on the server you are deploying to, so that it can correctly report environment-related information. If you would prefer to notify Honeybadger locally without using rake, check out our blog post: Honeybadger and Capistrano: the metal way.

Heroku

Deploy tracking via Heroku is implemented using Heroku's free deploy hooks addon. To install the addon and configure it for Honeybadger, run the following rake task from your project root:

rake honeybadger:heroku:add_deploy_notification APP=app-name

Don't forget to replace "app-name" with the name of your app on Heroku. Or, if you want to add the deploy hook manually, run:

heroku addons:add deployhooks:http --url="https://api.honeybadger.io/v1/deploys?deploy[environment]=production&api_key=asdf" --app app-name

You should replace the api key and app-name with your own values. You may also want to change the environment (set to production by default).

Via Rake

If you are using other frameworks/platforms, you can still notify us of a deploy. We provide a rake task that uses ENV variables to report environment information:

rake honeybadger:deploy TO=production

You can optionally add:

• REPO=[scm repo url]
• REVISION=[scm sha]
• USER=[local user's name]
• API_KEY=[a different api key]
• DRY_RUN=true (simulates notification)

Notifying Honeybadger asynchronously

Want to send notices in a thread, or even use Resque or Sidekiq to deliver notifications? The 'badger has you covered.

To get started, you'll need to configure Honeybadger to accept a handler. A handler can be any object that responds to #call (usually a Proc) and accepts one argument (a Honeybadger::Notice instance). The handler can be set directly by setting the async configuration option, or by passing a block to config.async (in this case, a Proc instance will be created for you):

Honeybadger.configure do |config|
  ...

  # Configuring handler directly:
  config.async do |notice|
    # Delivers notification immediately
    notice.deliver # => 'qwer-asdf-zxcv'
  end

  # Using your own handler (identical behavior):
  config.async = Proc.new { |n| n.deliver }
end

We've left the implementation mostly up to you, but here are a few examples of notifying Honeybadger asynchronously:

Using thread

Honeybadger.configure do |config|
  config.async do |notice|
    Thread.new { notice.deliver }
  end
end

Using Resque

Honeybadger.configure do |config|
  config.async do |notice|
    Resque.enqueue(WorkingBadger, notice.to_json)
  end
end

class WorkingBadger
  @queue = :cobra_alert

  def self.perform(notice)
    Honeybadger.sender.send_to_honeybadger(notice)
  end
end

Using Sidekiq

Honeybadger.configure do |config|
  config.async do |notice|
    WorkingBadger.perform_async(notice.to_json)
  end
end

class WorkingBadger
  include Sidekiq::Worker

  def perform(notice)
    Honeybadger.sender.send_to_honeybadger(notice)
  end
end

Using GirlFriday

COBRA_QUEUE = GirlFriday::WorkQueue.new(:honeybadger_notices, :size => 7) do |notice|
  notice.deliver
end

Honeybadger.configure do |config|
  config.async do |notice|
    COBRA_QUEUE.push(notice)
  end
end

Going beyond exceptions

You can also pass a hash to Honeybadger.notify method and store whatever you want, not just an exception. And you can also use it anywhere, not just in controllers:

begin
  params = {
    # params that you pass to a method that can throw an exception
  }
  my_unpredicable_method(*params)
rescue => e
  Honeybadger.notify(
    :error_class   => "Special Error",
    :error_message => "Special Error: #{e.message}",
    :parameters    => params
  )
end

While in your controllers you use the notify_honeybadger method, anywhere else in your code, use Honeybadger.notify. Honeybadger will get all the information about the error itself. As for a hash, these are the keys you should pass:

• :error_class - Use this to group similar errors together. When Honeybadger catches an exception it sends the class name of that exception object.
• :error_message - This is the title of the error you see in the errors list. For exceptions it is "#{exception.class.name}: #{exception.message}"
• :parameters - While there are several ways to send additional data to Honeybadger, passing a Hash as :parameters as in the example above is the most common use case. When Honeybadger catches an exception in a controller, the actual HTTP client request parameters are sent using this key.

Honeybadger merges the hash you pass with these default options:

{
  :api_key       => Honeybadger.api_key,
  :error_message => 'Notification',
  :backtrace     => caller,
  :parameters    => {},
  :session       => {},
  :context       => {}
}

You can override any of those parameters.

Sending shell environment variables when "Going beyond exceptions"

One common request we see is to send shell environment variables along with manual exception notification. We recommend sending them along with CGI data or Rack environment (:cgi_data or :rack_env keys, respectively.)

See Honeybadger::Notice#initialize in lib/honeybadger/notice.rb for more details.

Filtering

You can specify a whitelist of errors that Honeybadger will not report on. Use this feature when you are so apathetic to certain errors that you don't want them even logged.

This filter will only be applied to automatic notifications, not manual notifications (when #notify is called directly).

Honeybadger ignores the following exceptions by default:

ActiveRecord::RecordNotFound
ActionController::RoutingError
ActionController::InvalidAuthenticityToken
CGI::Session::CookieStore::TamperedWithCookie
ActionController::UnknownAction
AbstractController::ActionNotFound
Mongoid::Errors::DocumentNotFound

To ignore errors in addition to those, specify their names in your Honeybadger configuration block. You may use a string, regexp, or class:

Honeybadger.configure do |config|
  config.api_key      = '1234567890abcdef'
  config.ignore       << /IgnoredError$/
  config.ignore       << "ActiveRecord::IgnoreThisError"
  config.ignore       << OtherException
end

To ignore only certain errors (and override the defaults), use the #ignore_only attribute.

Honeybadger.configure do |config|
  config.api_key      = '1234567890abcdef'
  config.ignore_only  = ["ActiveRecord::IgnoreThisError"] # or [] to ignore no exceptions.
end

Subclasses of ignored classes will also be ignored, while strings and regexps are compared with the error class name only.

To ignore certain user agents, add in the #ignore_user_agent attribute as a string or regexp:

Honeybadger.configure do |config|
  config.api_key      = '1234567890abcdef'
  config.ignore_user_agent  << /Ignored/
  config.ignore_user_agent << 'IgnoredUserAgent'
end

To ignore exceptions based on other conditions, use #ignore_by_filter:

Honeybadger.configure do |config|
  config.api_key      = '1234567890abcdef'
  config.ignore_by_filter do |exception_data|
    true if exception_data[:error_class] == "RuntimeError"
  end
end

To replace sensitive information sent to the Honeybadger service with [FILTERED] use #params_filters:

Honeybadger.configure do |config|
  config.api_key      = '1234567890abcdef'
  config.params_filters << "credit_card_number"
end

Note that, when rescuing exceptions within an ActionController method, honeybadger will reuse filters specified by #filter_parameter_logging.

To disable sending session data:

Honeybadger.configure do |config|
  config.api_key      = '1234567890abcdef'
  config.send_request_session = false
end

Testing

When you run your tests, you might notice that the Honeybadger service is recording notices generated using #notify when you don't expect it to. You can use code like this in your test_helper.rb or spec_helper.rb files to redefine that method so those errors are not reported while running tests.

module Honeybadger
  def self.notify(exception, opts = {})
    # do nothing.
  end
end

Proxy Support

The notifier supports using a proxy, if your server is not able to directly reach the Honeybadger servers. To configure the proxy settings, added the following information to your Honeybadger configuration block.

Honeybadger.configure do |config|
  config.proxy_host = proxy.host.com
  config.proxy_port = 4038
  config.proxy_user = foo # optional
  config.proxy_pass = bar # optional
end

Troubleshooting

By default, Honeybadger is quiet when your log level is set to INFO (most production environments). If you would like to be notified via logs when Honeybadger completes a successful notification, set the config.debug option to true:

Honeybadger.configure do |config|
  ...
  config.debug = true
end

Supported Rails versions

Honeybadger supports Rails 2.3.14 through rails 3.2.9.

Contributing

1. Fork it.
2. Create a topic branch git checkout -b my_branch
3. Commit your changes git commit -am "Boom"
4. Push to your branch git push origin my_branch
5. Send a pull request

Running the tests

We're using the appraisal gem to run our test suite against multiple versions of Rails. To run the Cucumber features, use rake appraisal cucumber. Type rake -T for a complete list of available tasks.

The unit tests are undergoing some changes, but for now can be run with rake appraisal:rails2.3 test.

Credits

Original code based on the airbrake gem, originally by Thoughtbot, Inc.

Thank you to Thoughtbot and all of the Airbrake contributors!

The nifty custom data (Honeybadger.context()) feature was inspired by Exceptional.

License

Honeybadger is Copyright 2012 © Honeybadger Industries LLC. It is free software, and may be redistributed under the terms specified in the MIT-LICENSE file.