Just a compiled version of Masscan for windows

View Masscan project

https://github.com/robertdavidgraham/masscan

How to use it:

1.Download capable executable file:

https://github.com/Arryboom/MasscanForWindows/blob/master/masscan64.exe
https://github.com/Arryboom/MasscanForWindows/blob/master/masscan32.exe

2.Install Winpcap

https://www.winpcap.org/

3.Run executable file in command shell:

masscan --help

see if you can got echo back like this:

	MASSCAN is a fast port scanner. The primary input parameters are the
	IP addresses/ranges you want to scan, and the port numbers. An example
	is the following, which scans the 10.x.x.x network for web servers:
	 masscan 10.0.0.0/8 -p80
	The program auto-detects network interface/adapter settings. If this
	fails, you'll have to set these manually. The following is an
	example of all the parameters that are needed:
	 --adapter-ip 192.168.10.123
	 --adapter-mac 00-11-22-33-44-55
	 --router-mac 66-55-44-33-22-11
	Parameters can be set either via the command-line or config-file. The
	names are the same for both. Thus, the above adapter settings would
	appear as follows in a configuration file:
	 adapter-ip = 192.168.10.123
	 adapter-mac = 00-11-22-33-44-55
	 router-mac = 66-55-44-33-22-11
	All single-dash parameters have a spelled out double-dash equivalent,
	so '-p80' is the same as '--ports 80' (or 'ports = 80' in config file).
	To use the config file, type:
	 masscan -c <filename>
	To generate a config-file from the current settings, use the --echo
	option. This stops the program from actually running, and just echoes
	the current configuration instead. This is a useful way to generate
	your first config file, or see a list of parameters you didn't know
	about. I suggest you try it now:
	 masscan -p1234 --echo

If not:

You got any error like losing packet.dll,wpcap.dll,or 0x00000007,then you should search file packet.dll or wpcap.dll on your system folder,they usually showed in C:\Windows\system32\ or C:\Windows\Syswow64,found the right bit dll and copy they to the masscan folder then rerun again.

Compiled with :

• VS2019

  for successful compiled the source code from orignal project with VS2013,you'll need to add follow code in \misc\string_s.h below the VS2010 section:

    #if defined(_MSC_VER) && (_MSC_VER == 1800)
    /*Visual Studio 2013*/
    # include <stdio.h>
    # include <string.h>
    # define strcasecmp     _stricmp
    # define memcasecmp     _memicmp
    # ifndef PRIu64
    #  define PRIu64 "llu"
    #  define PRId64 "lld"
    #  define PRIx64 "llx"
    # endif
  

File info:

• File: masscan32.exe
• Size: 336384 bytes
• Modified: 2022-1-11 15:15:40
• MD5: AB405C3E3D229623C8A9EF1D77966ABF
• SHA1: 77116A498D21F9480602A329AEB024488A396E3A
• CRC32: 3D889CF6
• File: masscan64.exe
• Size: 403456 bytes
• Modified: 2022-1-11 15:14:53
• MD5: 01801464AC43A44C489CC00D4D25162C
• SHA1: 0E9BE7359D8FDE01199C04C1113B1E9272C93294
• CRC32: 693ADD8F

Thanks robertdavidgraham takes so many sharp tools for us!