Releases: AteamVentures/CuraCreatableEdition
Version 16.12.05
Version 16.10.07
- Change splash image
- Fix CREATABLE D3 Quick Slicing Start Gcode
Version 16.07.27
Cura CREATABLE Edition Version 16.07.27
End solution for Open Source Fused Filament Fabrication 3D printing.
Cura is currently developed and maintained by Ultimaker.
Cura CREATABLE Edition is based on Cura Version 15.02.1
Cura CREATABLE Edition has been modified and maintained by ATEAM Ventures Co., Ltd.
for using with CREATABLE D2 and CREATABLE D3.
Update Log:
Version 16.07.27
- Add shadow under the bed
- Delete background image
- Change the position and amount of pre-extrusion
- Add machine profile of new CREATABLE LABS Printer, CREATABLE D3.
- Merge the basic tab and the advanced tab
- Fan is always enabled
Version 16.02.29
- Delete the retraction after pre-extruding in Start Gcode
- Add retraction in End Gcode for preventing burning filament
Version 15.08.31
- Solve filament diameter warning problem
- Delete the example model which is shown when open cura 1st time
- Reduce the speed of starting extrusion
Version 15.07.1
- Change start.gcode
- Change some instructions in profile.py
- Update newVersionDialog.py
Cura CREATABLE Edition Ver.16.02.29
Cura CREATABLE Edition Version 16.02.29
End solution for Open Source Fused Filament Fabrication 3D printing.
Cura is currently developed and maintained by Ultimaker.
Cura CREATABLE Edition is based on Cura Version 15.02.1
Cura CREATABLE Edition has been modified and maintained by ATEAM Ventures Co., Ltd.
for using with CREATABLE D2.
Update Log:
Version 16.02.29
- Delete the retraction after pre-extruding in Start Gcode
- Add retraction in End Gcode for preventing burning filament
Version 15.08.31
- Solve filament diameter warning problem
- Delete the example model which is shown when open cura 1st time
- Reduce the speed of starting extrusion
Version 15.07.1
- Change start.gcode
- Change some instructions in profile.py
- Update newVersionDialog.py
Cura CREATABLE Edition Ver.15.08.31
Cura CREATABLE Edition Version 15.08.31
End solution for Open Source Fused Filament Fabrication 3D printing.
Cura is currently developed and maintained by Ultimaker.
Cura CREATABLE Edition is based on Cura Version 15.02.1
Cura CREATABLE Edition has been modified and maintained by ATEAM Ventures Co., Ltd.
for using with CREATABLE D2.
Update Log:
Version 15.08.31
- Solve filament diameter warning problem
- Delete the example model which is shown when open cura 1st time
- Reduce the speed of starting extrusion
Version 15.07.1
- Change start.gcode
- Change some instructions in profile.py
- Update newVersionDialog.py