services.go

package apimanagement

// Copyright (c) Microsoft and contributors.  All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
//
// See the License for the specific language governing permissions and
// limitations under the License.
//
// Code generated by Microsoft (R) AutoRest Code Generator.
// Changes may cause incorrect behavior and will be lost if the code is regenerated.

import (
	"context"
	"github.com/Azure/go-autorest/autorest"
	"github.com/Azure/go-autorest/autorest/azure"
	"github.com/Azure/go-autorest/autorest/validation"
	"net/http"
)

// ServicesClient is the apiManagement Client
type ServicesClient struct {
	BaseClient
}

// NewServicesClient creates an instance of the ServicesClient client.
func NewServicesClient(subscriptionID string) ServicesClient {
	return NewServicesClientWithBaseURI(DefaultBaseURI, subscriptionID)
}

// NewServicesClientWithBaseURI creates an instance of the ServicesClient client.
func NewServicesClientWithBaseURI(baseURI string, subscriptionID string) ServicesClient {
	return ServicesClient{NewWithBaseURI(baseURI, subscriptionID)}
}

// ApplyNetworkConfigurationUpdates updates the Microsoft.ApiManagement resource running in the Virtual network to pick
// the updated network settings.
// Parameters:
// resourceGroupName - the name of the resource group.
// serviceName - the name of the API Management service.
func (client ServicesClient) ApplyNetworkConfigurationUpdates(ctx context.Context, resourceGroupName string, serviceName string) (result ServicesApplyNetworkConfigurationUpdatesFuture, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: serviceName,
			Constraints: []validation.Constraint{{Target: "serviceName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "serviceName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "serviceName", Name: validation.Pattern, Rule: `^[a-zA-Z](?:[a-zA-Z0-9-]*[a-zA-Z0-9])?$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("apimanagement.ServicesClient", "ApplyNetworkConfigurationUpdates", err.Error())
	}

	req, err := client.ApplyNetworkConfigurationUpdatesPreparer(ctx, resourceGroupName, serviceName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "ApplyNetworkConfigurationUpdates", nil, "Failure preparing request")
		return
	}

	result, err = client.ApplyNetworkConfigurationUpdatesSender(req)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "ApplyNetworkConfigurationUpdates", result.Response(), "Failure sending request")
		return
	}

	return
}

// ApplyNetworkConfigurationUpdatesPreparer prepares the ApplyNetworkConfigurationUpdates request.
func (client ServicesClient) ApplyNetworkConfigurationUpdatesPreparer(ctx context.Context, resourceGroupName string, serviceName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"serviceName":       autorest.Encode("path", serviceName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-10-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ApiManagement/service/{serviceName}/applynetworkconfigurationupdates", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// ApplyNetworkConfigurationUpdatesSender sends the ApplyNetworkConfigurationUpdates request. The method will close the
// http.Response Body if it receives an error.
func (client ServicesClient) ApplyNetworkConfigurationUpdatesSender(req *http.Request) (future ServicesApplyNetworkConfigurationUpdatesFuture, err error) {
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
	if err != nil {
		return
	}
	err = autorest.Respond(resp, azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted))
	if err != nil {
		return
	}
	future.Future, err = azure.NewFutureFromResponse(resp)
	return
}

// ApplyNetworkConfigurationUpdatesResponder handles the response to the ApplyNetworkConfigurationUpdates request. The method always
// closes the http.Response Body.
func (client ServicesClient) ApplyNetworkConfigurationUpdatesResponder(resp *http.Response) (result ServiceResource, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Backup creates a backup of the API Management service to the given Azure Storage Account. This is long running
// operation and could take several minutes to complete.
// Parameters:
// resourceGroupName - the name of the resource group.
// serviceName - the name of the API Management service.
// parameters - parameters supplied to the ApiManagementServices_Backup operation.
func (client ServicesClient) Backup(ctx context.Context, resourceGroupName string, serviceName string, parameters ServiceBackupRestoreParameters) (result ServicesBackupFuture, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: serviceName,
			Constraints: []validation.Constraint{{Target: "serviceName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "serviceName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "serviceName", Name: validation.Pattern, Rule: `^[a-zA-Z](?:[a-zA-Z0-9-]*[a-zA-Z0-9])?$`, Chain: nil}}},
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.StorageAccount", Name: validation.Null, Rule: true, Chain: nil},
				{Target: "parameters.AccessKey", Name: validation.Null, Rule: true, Chain: nil},
				{Target: "parameters.ContainerName", Name: validation.Null, Rule: true, Chain: nil},
				{Target: "parameters.BackupName", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewError("apimanagement.ServicesClient", "Backup", err.Error())
	}

	req, err := client.BackupPreparer(ctx, resourceGroupName, serviceName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "Backup", nil, "Failure preparing request")
		return
	}

	result, err = client.BackupSender(req)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "Backup", result.Response(), "Failure sending request")
		return
	}

	return
}

// BackupPreparer prepares the Backup request.
func (client ServicesClient) BackupPreparer(ctx context.Context, resourceGroupName string, serviceName string, parameters ServiceBackupRestoreParameters) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"serviceName":       autorest.Encode("path", serviceName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-10-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsContentType("application/json; charset=utf-8"),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ApiManagement/service/{serviceName}/backup", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// BackupSender sends the Backup request. The method will close the
// http.Response Body if it receives an error.
func (client ServicesClient) BackupSender(req *http.Request) (future ServicesBackupFuture, err error) {
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
	if err != nil {
		return
	}
	err = autorest.Respond(resp, azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted))
	if err != nil {
		return
	}
	future.Future, err = azure.NewFutureFromResponse(resp)
	return
}

// BackupResponder handles the response to the Backup request. The method always
// closes the http.Response Body.
func (client ServicesClient) BackupResponder(resp *http.Response) (result ServiceResource, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// CheckNameAvailability checks availability and correctness of a name for an API Management service.
// Parameters:
// parameters - parameters supplied to the CheckNameAvailability operation.
func (client ServicesClient) CheckNameAvailability(ctx context.Context, parameters ServiceCheckNameAvailabilityParameters) (result ServiceNameAvailabilityResult, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.Name", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewError("apimanagement.ServicesClient", "CheckNameAvailability", err.Error())
	}

	req, err := client.CheckNameAvailabilityPreparer(ctx, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "CheckNameAvailability", nil, "Failure preparing request")
		return
	}

	resp, err := client.CheckNameAvailabilitySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "CheckNameAvailability", resp, "Failure sending request")
		return
	}

	result, err = client.CheckNameAvailabilityResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "CheckNameAvailability", resp, "Failure responding to request")
	}

	return
}

// CheckNameAvailabilityPreparer prepares the CheckNameAvailability request.
func (client ServicesClient) CheckNameAvailabilityPreparer(ctx context.Context, parameters ServiceCheckNameAvailabilityParameters) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"subscriptionId": autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-10-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsContentType("application/json; charset=utf-8"),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.ApiManagement/checkNameAvailability", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// CheckNameAvailabilitySender sends the CheckNameAvailability request. The method will close the
// http.Response Body if it receives an error.
func (client ServicesClient) CheckNameAvailabilitySender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// CheckNameAvailabilityResponder handles the response to the CheckNameAvailability request. The method always
// closes the http.Response Body.
func (client ServicesClient) CheckNameAvailabilityResponder(resp *http.Response) (result ServiceNameAvailabilityResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// CreateOrUpdate creates or updates an API Management service. This is long running operation and could take several
// minutes to complete.
// Parameters:
// resourceGroupName - the name of the resource group.
// serviceName - the name of the API Management service.
// parameters - parameters supplied to the CreateOrUpdate API Management service operation.
func (client ServicesClient) CreateOrUpdate(ctx context.Context, resourceGroupName string, serviceName string, parameters ServiceResource) (result ServiceResource, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: serviceName,
			Constraints: []validation.Constraint{{Target: "serviceName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "serviceName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "serviceName", Name: validation.Pattern, Rule: `^[a-zA-Z](?:[a-zA-Z0-9-]*[a-zA-Z0-9])?$`, Chain: nil}}},
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.ServiceProperties", Name: validation.Null, Rule: true,
				Chain: []validation.Constraint{{Target: "parameters.ServiceProperties.PublisherEmail", Name: validation.Null, Rule: true,
					Chain: []validation.Constraint{{Target: "parameters.ServiceProperties.PublisherEmail", Name: validation.MaxLength, Rule: 100, Chain: nil}}},
					{Target: "parameters.ServiceProperties.PublisherName", Name: validation.Null, Rule: true, Chain: nil},
					{Target: "parameters.ServiceProperties.Vpnconfiguration", Name: validation.Null, Rule: false,
						Chain: []validation.Constraint{{Target: "parameters.ServiceProperties.Vpnconfiguration.SubnetResourceID", Name: validation.Null, Rule: false,
							Chain: []validation.Constraint{{Target: "parameters.ServiceProperties.Vpnconfiguration.SubnetResourceID", Name: validation.Pattern, Rule: `^/subscriptions/[^/]*/resourceGroups/[^/]*/providers/Microsoft.(ClassicNetwork|Network)/virtualNetworks/[^/]*/subnets/[^/]*$`, Chain: nil}}},
						}},
				}},
				{Target: "parameters.Sku", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewError("apimanagement.ServicesClient", "CreateOrUpdate", err.Error())
	}

	req, err := client.CreateOrUpdatePreparer(ctx, resourceGroupName, serviceName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "CreateOrUpdate", nil, "Failure preparing request")
		return
	}

	resp, err := client.CreateOrUpdateSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "CreateOrUpdate", resp, "Failure sending request")
		return
	}

	result, err = client.CreateOrUpdateResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "CreateOrUpdate", resp, "Failure responding to request")
	}

	return
}

// CreateOrUpdatePreparer prepares the CreateOrUpdate request.
func (client ServicesClient) CreateOrUpdatePreparer(ctx context.Context, resourceGroupName string, serviceName string, parameters ServiceResource) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"serviceName":       autorest.Encode("path", serviceName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-10-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsContentType("application/json; charset=utf-8"),
		autorest.AsPut(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ApiManagement/service/{serviceName}", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// CreateOrUpdateSender sends the CreateOrUpdate request. The method will close the
// http.Response Body if it receives an error.
func (client ServicesClient) CreateOrUpdateSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// CreateOrUpdateResponder handles the response to the CreateOrUpdate request. The method always
// closes the http.Response Body.
func (client ServicesClient) CreateOrUpdateResponder(resp *http.Response) (result ServiceResource, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusCreated),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Delete deletes an existing API Management service.
// Parameters:
// resourceGroupName - the name of the resource group.
// serviceName - the name of the API Management service.
func (client ServicesClient) Delete(ctx context.Context, resourceGroupName string, serviceName string) (result autorest.Response, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: serviceName,
			Constraints: []validation.Constraint{{Target: "serviceName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "serviceName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "serviceName", Name: validation.Pattern, Rule: `^[a-zA-Z](?:[a-zA-Z0-9-]*[a-zA-Z0-9])?$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("apimanagement.ServicesClient", "Delete", err.Error())
	}

	req, err := client.DeletePreparer(ctx, resourceGroupName, serviceName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "Delete", nil, "Failure preparing request")
		return
	}

	resp, err := client.DeleteSender(req)
	if err != nil {
		result.Response = resp
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "Delete", resp, "Failure sending request")
		return
	}

	result, err = client.DeleteResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "Delete", resp, "Failure responding to request")
	}

	return
}

// DeletePreparer prepares the Delete request.
func (client ServicesClient) DeletePreparer(ctx context.Context, resourceGroupName string, serviceName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"serviceName":       autorest.Encode("path", serviceName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-10-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsDelete(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ApiManagement/service/{serviceName}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// DeleteSender sends the Delete request. The method will close the
// http.Response Body if it receives an error.
func (client ServicesClient) DeleteSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// DeleteResponder handles the response to the Delete request. The method always
// closes the http.Response Body.
func (client ServicesClient) DeleteResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusNoContent),
		autorest.ByClosing())
	result.Response = resp
	return
}

// Get gets an API Management service resource description.
// Parameters:
// resourceGroupName - the name of the resource group.
// serviceName - the name of the API Management service.
func (client ServicesClient) Get(ctx context.Context, resourceGroupName string, serviceName string) (result ServiceResource, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: serviceName,
			Constraints: []validation.Constraint{{Target: "serviceName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "serviceName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "serviceName", Name: validation.Pattern, Rule: `^[a-zA-Z](?:[a-zA-Z0-9-]*[a-zA-Z0-9])?$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("apimanagement.ServicesClient", "Get", err.Error())
	}

	req, err := client.GetPreparer(ctx, resourceGroupName, serviceName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "Get", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "Get", resp, "Failure sending request")
		return
	}

	result, err = client.GetResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "Get", resp, "Failure responding to request")
	}

	return
}

// GetPreparer prepares the Get request.
func (client ServicesClient) GetPreparer(ctx context.Context, resourceGroupName string, serviceName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"serviceName":       autorest.Encode("path", serviceName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-10-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ApiManagement/service/{serviceName}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetSender sends the Get request. The method will close the
// http.Response Body if it receives an error.
func (client ServicesClient) GetSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// GetResponder handles the response to the Get request. The method always
// closes the http.Response Body.
func (client ServicesClient) GetResponder(resp *http.Response) (result ServiceResource, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// GetSsoToken gets the Single-Sign-On token for the API Management Service which is valid for 5 Minutes.
// Parameters:
// resourceGroupName - the name of the resource group.
// serviceName - the name of the API Management service.
func (client ServicesClient) GetSsoToken(ctx context.Context, resourceGroupName string, serviceName string) (result ServiceGetSsoTokenResult, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: serviceName,
			Constraints: []validation.Constraint{{Target: "serviceName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "serviceName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "serviceName", Name: validation.Pattern, Rule: `^[a-zA-Z](?:[a-zA-Z0-9-]*[a-zA-Z0-9])?$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("apimanagement.ServicesClient", "GetSsoToken", err.Error())
	}

	req, err := client.GetSsoTokenPreparer(ctx, resourceGroupName, serviceName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "GetSsoToken", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetSsoTokenSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "GetSsoToken", resp, "Failure sending request")
		return
	}

	result, err = client.GetSsoTokenResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "GetSsoToken", resp, "Failure responding to request")
	}

	return
}

// GetSsoTokenPreparer prepares the GetSsoToken request.
func (client ServicesClient) GetSsoTokenPreparer(ctx context.Context, resourceGroupName string, serviceName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"serviceName":       autorest.Encode("path", serviceName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-10-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ApiManagement/service/{serviceName}/getssotoken", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetSsoTokenSender sends the GetSsoToken request. The method will close the
// http.Response Body if it receives an error.
func (client ServicesClient) GetSsoTokenSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// GetSsoTokenResponder handles the response to the GetSsoToken request. The method always
// closes the http.Response Body.
func (client ServicesClient) GetSsoTokenResponder(resp *http.Response) (result ServiceGetSsoTokenResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// List lists all API Management services within an Azure subscription.
func (client ServicesClient) List(ctx context.Context) (result ServiceListResultPage, err error) {
	result.fn = client.listNextResults
	req, err := client.ListPreparer(ctx)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "List", nil, "Failure preparing request")
		return
	}

	resp, err := client.ListSender(req)
	if err != nil {
		result.slr.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "List", resp, "Failure sending request")
		return
	}

	result.slr, err = client.ListResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "List", resp, "Failure responding to request")
	}

	return
}

// ListPreparer prepares the List request.
func (client ServicesClient) ListPreparer(ctx context.Context) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"subscriptionId": autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-10-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.ApiManagement/service/", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// ListSender sends the List request. The method will close the
// http.Response Body if it receives an error.
func (client ServicesClient) ListSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// ListResponder handles the response to the List request. The method always
// closes the http.Response Body.
func (client ServicesClient) ListResponder(resp *http.Response) (result ServiceListResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// listNextResults retrieves the next set of results, if any.
func (client ServicesClient) listNextResults(lastResults ServiceListResult) (result ServiceListResult, err error) {
	req, err := lastResults.serviceListResultPreparer()
	if err != nil {
		return result, autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "listNextResults", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}
	resp, err := client.ListSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "listNextResults", resp, "Failure sending next results request")
	}
	result, err = client.ListResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "listNextResults", resp, "Failure responding to next results request")
	}
	return
}

// ListComplete enumerates all values, automatically crossing page boundaries as required.
func (client ServicesClient) ListComplete(ctx context.Context) (result ServiceListResultIterator, err error) {
	result.page, err = client.List(ctx)
	return
}

// ListByResourceGroup list all API Management services within a resource group.
// Parameters:
// resourceGroupName - the name of the resource group.
func (client ServicesClient) ListByResourceGroup(ctx context.Context, resourceGroupName string) (result ServiceListResultPage, err error) {
	result.fn = client.listByResourceGroupNextResults
	req, err := client.ListByResourceGroupPreparer(ctx, resourceGroupName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "ListByResourceGroup", nil, "Failure preparing request")
		return
	}

	resp, err := client.ListByResourceGroupSender(req)
	if err != nil {
		result.slr.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "ListByResourceGroup", resp, "Failure sending request")
		return
	}

	result.slr, err = client.ListByResourceGroupResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "ListByResourceGroup", resp, "Failure responding to request")
	}

	return
}

// ListByResourceGroupPreparer prepares the ListByResourceGroup request.
func (client ServicesClient) ListByResourceGroupPreparer(ctx context.Context, resourceGroupName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-10-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ApiManagement/service/", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// ListByResourceGroupSender sends the ListByResourceGroup request. The method will close the
// http.Response Body if it receives an error.
func (client ServicesClient) ListByResourceGroupSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// ListByResourceGroupResponder handles the response to the ListByResourceGroup request. The method always
// closes the http.Response Body.
func (client ServicesClient) ListByResourceGroupResponder(resp *http.Response) (result ServiceListResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// listByResourceGroupNextResults retrieves the next set of results, if any.
func (client ServicesClient) listByResourceGroupNextResults(lastResults ServiceListResult) (result ServiceListResult, err error) {
	req, err := lastResults.serviceListResultPreparer()
	if err != nil {
		return result, autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "listByResourceGroupNextResults", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}
	resp, err := client.ListByResourceGroupSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "listByResourceGroupNextResults", resp, "Failure sending next results request")
	}
	result, err = client.ListByResourceGroupResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "listByResourceGroupNextResults", resp, "Failure responding to next results request")
	}
	return
}

// ListByResourceGroupComplete enumerates all values, automatically crossing page boundaries as required.
func (client ServicesClient) ListByResourceGroupComplete(ctx context.Context, resourceGroupName string) (result ServiceListResultIterator, err error) {
	result.page, err = client.ListByResourceGroup(ctx, resourceGroupName)
	return
}

// ManageDeployments manages deployments of an API Management service. This operation can be used to do the following:
// Change SKU, Change SKU Units, Change Service Tier (Developer/Standard/Premium) and Manage VPN Configuration. This is
// a long running operation and can take several minutes to complete.
// Parameters:
// resourceGroupName - the name of the resource group.
// serviceName - the name of the API Management service.
// parameters - parameters supplied to the ManageDeployments operation.
func (client ServicesClient) ManageDeployments(ctx context.Context, resourceGroupName string, serviceName string, parameters ServiceManageDeploymentsParameters) (result ServicesManageDeploymentsFuture, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: serviceName,
			Constraints: []validation.Constraint{{Target: "serviceName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "serviceName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "serviceName", Name: validation.Pattern, Rule: `^[a-zA-Z](?:[a-zA-Z0-9-]*[a-zA-Z0-9])?$`, Chain: nil}}},
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.Location", Name: validation.Null, Rule: true, Chain: nil},
				{Target: "parameters.VpnConfiguration", Name: validation.Null, Rule: false,
					Chain: []validation.Constraint{{Target: "parameters.VpnConfiguration.SubnetResourceID", Name: validation.Null, Rule: false,
						Chain: []validation.Constraint{{Target: "parameters.VpnConfiguration.SubnetResourceID", Name: validation.Pattern, Rule: `^/subscriptions/[^/]*/resourceGroups/[^/]*/providers/Microsoft.(ClassicNetwork|Network)/virtualNetworks/[^/]*/subnets/[^/]*$`, Chain: nil}}},
					}}}}}); err != nil {
		return result, validation.NewError("apimanagement.ServicesClient", "ManageDeployments", err.Error())
	}

	req, err := client.ManageDeploymentsPreparer(ctx, resourceGroupName, serviceName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "ManageDeployments", nil, "Failure preparing request")
		return
	}

	result, err = client.ManageDeploymentsSender(req)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "ManageDeployments", result.Response(), "Failure sending request")
		return
	}

	return
}

// ManageDeploymentsPreparer prepares the ManageDeployments request.
func (client ServicesClient) ManageDeploymentsPreparer(ctx context.Context, resourceGroupName string, serviceName string, parameters ServiceManageDeploymentsParameters) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"serviceName":       autorest.Encode("path", serviceName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-10-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsContentType("application/json; charset=utf-8"),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ApiManagement/service/{serviceName}/managedeployments", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// ManageDeploymentsSender sends the ManageDeployments request. The method will close the
// http.Response Body if it receives an error.
func (client ServicesClient) ManageDeploymentsSender(req *http.Request) (future ServicesManageDeploymentsFuture, err error) {
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
	if err != nil {
		return
	}
	err = autorest.Respond(resp, azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted))
	if err != nil {
		return
	}
	future.Future, err = azure.NewFutureFromResponse(resp)
	return
}

// ManageDeploymentsResponder handles the response to the ManageDeployments request. The method always
// closes the http.Response Body.
func (client ServicesClient) ManageDeploymentsResponder(resp *http.Response) (result ServiceResource, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Restore restores a backup of an API Management service created using the ApiManagementServices_Backup operation on
// the current service. This is a long running operation and could take several minutes to complete.
// Parameters:
// resourceGroupName - the name of the resource group.
// serviceName - the name of the API Management service.
// parameters - parameters supplied to the Restore API Management service from backup operation.
func (client ServicesClient) Restore(ctx context.Context, resourceGroupName string, serviceName string, parameters ServiceBackupRestoreParameters) (result ServicesRestoreFuture, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: serviceName,
			Constraints: []validation.Constraint{{Target: "serviceName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "serviceName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "serviceName", Name: validation.Pattern, Rule: `^[a-zA-Z](?:[a-zA-Z0-9-]*[a-zA-Z0-9])?$`, Chain: nil}}},
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.StorageAccount", Name: validation.Null, Rule: true, Chain: nil},
				{Target: "parameters.AccessKey", Name: validation.Null, Rule: true, Chain: nil},
				{Target: "parameters.ContainerName", Name: validation.Null, Rule: true, Chain: nil},
				{Target: "parameters.BackupName", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewError("apimanagement.ServicesClient", "Restore", err.Error())
	}

	req, err := client.RestorePreparer(ctx, resourceGroupName, serviceName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "Restore", nil, "Failure preparing request")
		return
	}

	result, err = client.RestoreSender(req)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "Restore", result.Response(), "Failure sending request")
		return
	}

	return
}

// RestorePreparer prepares the Restore request.
func (client ServicesClient) RestorePreparer(ctx context.Context, resourceGroupName string, serviceName string, parameters ServiceBackupRestoreParameters) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"serviceName":       autorest.Encode("path", serviceName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-10-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsContentType("application/json; charset=utf-8"),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ApiManagement/service/{serviceName}/restore", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// RestoreSender sends the Restore request. The method will close the
// http.Response Body if it receives an error.
func (client ServicesClient) RestoreSender(req *http.Request) (future ServicesRestoreFuture, err error) {
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
	if err != nil {
		return
	}
	err = autorest.Respond(resp, azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted))
	if err != nil {
		return
	}
	future.Future, err = azure.NewFutureFromResponse(resp)
	return
}

// RestoreResponder handles the response to the Restore request. The method always
// closes the http.Response Body.
func (client ServicesClient) RestoreResponder(resp *http.Response) (result ServiceResource, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Update updates an existing API Management service.
// Parameters:
// resourceGroupName - the name of the resource group.
// serviceName - the name of the API Management service.
// parameters - parameters supplied to the CreateOrUpdate API Management service operation.
func (client ServicesClient) Update(ctx context.Context, resourceGroupName string, serviceName string, parameters ServiceUpdateParameters) (result ServicesUpdateFuture, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: serviceName,
			Constraints: []validation.Constraint{{Target: "serviceName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "serviceName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "serviceName", Name: validation.Pattern, Rule: `^[a-zA-Z](?:[a-zA-Z0-9-]*[a-zA-Z0-9])?$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("apimanagement.ServicesClient", "Update", err.Error())
	}

	req, err := client.UpdatePreparer(ctx, resourceGroupName, serviceName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "Update", nil, "Failure preparing request")
		return
	}

	result, err = client.UpdateSender(req)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "Update", result.Response(), "Failure sending request")
		return
	}

	return
}

// UpdatePreparer prepares the Update request.
func (client ServicesClient) UpdatePreparer(ctx context.Context, resourceGroupName string, serviceName string, parameters ServiceUpdateParameters) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"serviceName":       autorest.Encode("path", serviceName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-10-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsContentType("application/json; charset=utf-8"),
		autorest.AsPatch(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ApiManagement/service/{serviceName}", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// UpdateSender sends the Update request. The method will close the
// http.Response Body if it receives an error.
func (client ServicesClient) UpdateSender(req *http.Request) (future ServicesUpdateFuture, err error) {
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
	if err != nil {
		return
	}
	err = autorest.Respond(resp, azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted))
	if err != nil {
		return
	}
	future.Future, err = azure.NewFutureFromResponse(resp)
	return
}

// UpdateResponder handles the response to the Update request. The method always
// closes the http.Response Body.
func (client ServicesClient) UpdateResponder(resp *http.Response) (result ServiceResource, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// UpdateHostname creates, updates, or deletes the custom hostnames for an API Management service. The custom hostname
// can be applied to the Proxy and Portal endpoint. This is a long running operation and could take several minutes to
// complete.
// Parameters:
// resourceGroupName - the name of the resource group.
// serviceName - the name of the API Management service.
// parameters - parameters supplied to the UpdateHostname operation.
func (client ServicesClient) UpdateHostname(ctx context.Context, resourceGroupName string, serviceName string, parameters ServiceUpdateHostnameParameters) (result ServicesUpdateHostnameFuture, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: serviceName,
			Constraints: []validation.Constraint{{Target: "serviceName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "serviceName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "serviceName", Name: validation.Pattern, Rule: `^[a-zA-Z](?:[a-zA-Z0-9-]*[a-zA-Z0-9])?$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("apimanagement.ServicesClient", "UpdateHostname", err.Error())
	}

	req, err := client.UpdateHostnamePreparer(ctx, resourceGroupName, serviceName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "UpdateHostname", nil, "Failure preparing request")
		return
	}

	result, err = client.UpdateHostnameSender(req)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "UpdateHostname", result.Response(), "Failure sending request")
		return
	}

	return
}

// UpdateHostnamePreparer prepares the UpdateHostname request.
func (client ServicesClient) UpdateHostnamePreparer(ctx context.Context, resourceGroupName string, serviceName string, parameters ServiceUpdateHostnameParameters) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"serviceName":       autorest.Encode("path", serviceName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-10-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsContentType("application/json; charset=utf-8"),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ApiManagement/service/{serviceName}/updatehostname", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// UpdateHostnameSender sends the UpdateHostname request. The method will close the
// http.Response Body if it receives an error.
func (client ServicesClient) UpdateHostnameSender(req *http.Request) (future ServicesUpdateHostnameFuture, err error) {
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
	if err != nil {
		return
	}
	err = autorest.Respond(resp, azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted))
	if err != nil {
		return
	}
	future.Future, err = azure.NewFutureFromResponse(resp)
	return
}

// UpdateHostnameResponder handles the response to the UpdateHostname request. The method always
// closes the http.Response Body.
func (client ServicesClient) UpdateHostnameResponder(resp *http.Response) (result ServiceResource, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// UploadCertificate upload Custom Domain SSL certificate for an API Management service.
// Parameters:
// resourceGroupName - the name of the resource group.
// serviceName - the name of the API Management service.
// parameters - parameters supplied to the Upload SSL certificate for an API Management service operation.
func (client ServicesClient) UploadCertificate(ctx context.Context, resourceGroupName string, serviceName string, parameters ServiceUploadCertificateParameters) (result CertificateInformation, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: serviceName,
			Constraints: []validation.Constraint{{Target: "serviceName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "serviceName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "serviceName", Name: validation.Pattern, Rule: `^[a-zA-Z](?:[a-zA-Z0-9-]*[a-zA-Z0-9])?$`, Chain: nil}}},
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.Certificate", Name: validation.Null, Rule: true, Chain: nil},
				{Target: "parameters.CertificatePassword", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewError("apimanagement.ServicesClient", "UploadCertificate", err.Error())
	}

	req, err := client.UploadCertificatePreparer(ctx, resourceGroupName, serviceName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "UploadCertificate", nil, "Failure preparing request")
		return
	}

	resp, err := client.UploadCertificateSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "UploadCertificate", resp, "Failure sending request")
		return
	}

	result, err = client.UploadCertificateResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "apimanagement.ServicesClient", "UploadCertificate", resp, "Failure responding to request")
	}

	return
}

// UploadCertificatePreparer prepares the UploadCertificate request.
func (client ServicesClient) UploadCertificatePreparer(ctx context.Context, resourceGroupName string, serviceName string, parameters ServiceUploadCertificateParameters) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"serviceName":       autorest.Encode("path", serviceName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-10-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsContentType("application/json; charset=utf-8"),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ApiManagement/service/{serviceName}/uploadcertificate", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// UploadCertificateSender sends the UploadCertificate request. The method will close the
// http.Response Body if it receives an error.
func (client ServicesClient) UploadCertificateSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// UploadCertificateResponder handles the response to the UploadCertificate request. The method always
// closes the http.Response Body.
func (client ServicesClient) UploadCertificateResponder(resp *http.Response) (result CertificateInformation, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}