models.go

package batch

// Copyright (c) Microsoft and contributors.  All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
//
// See the License for the specific language governing permissions and
// limitations under the License.
//
// Code generated by Microsoft (R) AutoRest Code Generator.
// Changes may cause incorrect behavior and will be lost if the code is regenerated.

import (
	"context"
	"encoding/json"
	"github.com/Azure/go-autorest/autorest"
	"github.com/Azure/go-autorest/autorest/azure"
	"github.com/Azure/go-autorest/autorest/date"
	"github.com/Azure/go-autorest/autorest/to"
	"github.com/Azure/go-autorest/tracing"
	"net/http"
)

// The package's fully qualified name.
const fqdn = "github.com/Azure/azure-sdk-for-go/services/batch/mgmt/2019-04-01/batch"

// AccountKeyType enumerates the values for account key type.
type AccountKeyType string

const (
	// Primary The primary account key.
	Primary AccountKeyType = "Primary"
	// Secondary The secondary account key.
	Secondary AccountKeyType = "Secondary"
)

// PossibleAccountKeyTypeValues returns an array of possible values for the AccountKeyType const type.
func PossibleAccountKeyTypeValues() []AccountKeyType {
	return []AccountKeyType{Primary, Secondary}
}

// AllocationState enumerates the values for allocation state.
type AllocationState string

const (
	// Resizing The pool is resizing; that is, compute nodes are being added to or removed from the pool.
	Resizing AllocationState = "Resizing"
	// Steady The pool is not resizing. There are no changes to the number of nodes in the pool in progress. A
	// pool enters this state when it is created and when no operations are being performed on the pool to
	// change the number of nodes.
	Steady AllocationState = "Steady"
	// Stopping The pool was resizing, but the user has requested that the resize be stopped, but the stop
	// request has not yet been completed.
	Stopping AllocationState = "Stopping"
)

// PossibleAllocationStateValues returns an array of possible values for the AllocationState const type.
func PossibleAllocationStateValues() []AllocationState {
	return []AllocationState{Resizing, Steady, Stopping}
}

// AutoUserScope enumerates the values for auto user scope.
type AutoUserScope string

const (
	// AutoUserScopePool Specifies that the task runs as the common auto user account which is created on every
	// node in a pool.
	AutoUserScopePool AutoUserScope = "Pool"
	// AutoUserScopeTask Specifies that the service should create a new user for the task.
	AutoUserScopeTask AutoUserScope = "Task"
)

// PossibleAutoUserScopeValues returns an array of possible values for the AutoUserScope const type.
func PossibleAutoUserScopeValues() []AutoUserScope {
	return []AutoUserScope{AutoUserScopePool, AutoUserScopeTask}
}

// CachingType enumerates the values for caching type.
type CachingType string

const (
	// None The caching mode for the disk is not enabled.
	None CachingType = "None"
	// ReadOnly The caching mode for the disk is read only.
	ReadOnly CachingType = "ReadOnly"
	// ReadWrite The caching mode for the disk is read and write.
	ReadWrite CachingType = "ReadWrite"
)

// PossibleCachingTypeValues returns an array of possible values for the CachingType const type.
func PossibleCachingTypeValues() []CachingType {
	return []CachingType{None, ReadOnly, ReadWrite}
}

// CertificateFormat enumerates the values for certificate format.
type CertificateFormat string

const (
	// Cer The certificate is a base64-encoded X.509 certificate.
	Cer CertificateFormat = "Cer"
	// Pfx The certificate is a PFX (PKCS#12) formatted certificate or certificate chain.
	Pfx CertificateFormat = "Pfx"
)

// PossibleCertificateFormatValues returns an array of possible values for the CertificateFormat const type.
func PossibleCertificateFormatValues() []CertificateFormat {
	return []CertificateFormat{Cer, Pfx}
}

// CertificateProvisioningState enumerates the values for certificate provisioning state.
type CertificateProvisioningState string

const (
	// Deleting The user has requested that the certificate be deleted, but the delete operation has not yet
	// completed. You may not reference the certificate when creating or updating pools.
	Deleting CertificateProvisioningState = "Deleting"
	// Failed The user requested that the certificate be deleted, but there are pools that still have
	// references to the certificate, or it is still installed on one or more compute nodes. (The latter can
	// occur if the certificate has been removed from the pool, but the node has not yet restarted. Nodes
	// refresh their certificates only when they restart.) You may use the cancel certificate delete operation
	// to cancel the delete, or the delete certificate operation to retry the delete.
	Failed CertificateProvisioningState = "Failed"
	// Succeeded The certificate is available for use in pools.
	Succeeded CertificateProvisioningState = "Succeeded"
)

// PossibleCertificateProvisioningStateValues returns an array of possible values for the CertificateProvisioningState const type.
func PossibleCertificateProvisioningStateValues() []CertificateProvisioningState {
	return []CertificateProvisioningState{Deleting, Failed, Succeeded}
}

// CertificateStoreLocation enumerates the values for certificate store location.
type CertificateStoreLocation string

const (
	// CurrentUser Certificates should be installed to the CurrentUser certificate store.
	CurrentUser CertificateStoreLocation = "CurrentUser"
	// LocalMachine Certificates should be installed to the LocalMachine certificate store.
	LocalMachine CertificateStoreLocation = "LocalMachine"
)

// PossibleCertificateStoreLocationValues returns an array of possible values for the CertificateStoreLocation const type.
func PossibleCertificateStoreLocationValues() []CertificateStoreLocation {
	return []CertificateStoreLocation{CurrentUser, LocalMachine}
}

// CertificateVisibility enumerates the values for certificate visibility.
type CertificateVisibility string

const (
	// CertificateVisibilityRemoteUser The certificate should be visible to the user accounts under which users
	// remotely access the node.
	CertificateVisibilityRemoteUser CertificateVisibility = "RemoteUser"
	// CertificateVisibilityStartTask The certificate should be visible to the user account under which the
	// start task is run.
	CertificateVisibilityStartTask CertificateVisibility = "StartTask"
	// CertificateVisibilityTask The certificate should be visible to the user accounts under which job tasks
	// are run.
	CertificateVisibilityTask CertificateVisibility = "Task"
)

// PossibleCertificateVisibilityValues returns an array of possible values for the CertificateVisibility const type.
func PossibleCertificateVisibilityValues() []CertificateVisibility {
	return []CertificateVisibility{CertificateVisibilityRemoteUser, CertificateVisibilityStartTask, CertificateVisibilityTask}
}

// ComputeNodeDeallocationOption enumerates the values for compute node deallocation option.
type ComputeNodeDeallocationOption string

const (
	// Requeue Terminate running task processes and requeue the tasks. The tasks will run again when a node is
	// available. Remove nodes as soon as tasks have been terminated.
	Requeue ComputeNodeDeallocationOption = "Requeue"
	// RetainedData Allow currently running tasks to complete, then wait for all task data retention periods to
	// expire. Schedule no new tasks while waiting. Remove nodes when all task retention periods have expired.
	RetainedData ComputeNodeDeallocationOption = "RetainedData"
	// TaskCompletion Allow currently running tasks to complete. Schedule no new tasks while waiting. Remove
	// nodes when all tasks have completed.
	TaskCompletion ComputeNodeDeallocationOption = "TaskCompletion"
	// Terminate Terminate running tasks. The tasks will be completed with failureInfo indicating that they
	// were terminated, and will not run again. Remove nodes as soon as tasks have been terminated.
	Terminate ComputeNodeDeallocationOption = "Terminate"
)

// PossibleComputeNodeDeallocationOptionValues returns an array of possible values for the ComputeNodeDeallocationOption const type.
func PossibleComputeNodeDeallocationOptionValues() []ComputeNodeDeallocationOption {
	return []ComputeNodeDeallocationOption{Requeue, RetainedData, TaskCompletion, Terminate}
}

// ComputeNodeFillType enumerates the values for compute node fill type.
type ComputeNodeFillType string

const (
	// Pack As many tasks as possible (maxTasksPerNode) should be assigned to each node in the pool before any
	// tasks are assigned to the next node in the pool.
	Pack ComputeNodeFillType = "Pack"
	// Spread Tasks should be assigned evenly across all nodes in the pool.
	Spread ComputeNodeFillType = "Spread"
)

// PossibleComputeNodeFillTypeValues returns an array of possible values for the ComputeNodeFillType const type.
func PossibleComputeNodeFillTypeValues() []ComputeNodeFillType {
	return []ComputeNodeFillType{Pack, Spread}
}

// ElevationLevel enumerates the values for elevation level.
type ElevationLevel string

const (
	// Admin The user is a user with elevated access and operates with full Administrator permissions.
	Admin ElevationLevel = "Admin"
	// NonAdmin The user is a standard user without elevated access.
	NonAdmin ElevationLevel = "NonAdmin"
)

// PossibleElevationLevelValues returns an array of possible values for the ElevationLevel const type.
func PossibleElevationLevelValues() []ElevationLevel {
	return []ElevationLevel{Admin, NonAdmin}
}

// InboundEndpointProtocol enumerates the values for inbound endpoint protocol.
type InboundEndpointProtocol string

const (
	// TCP Use TCP for the endpoint.
	TCP InboundEndpointProtocol = "TCP"
	// UDP Use UDP for the endpoint.
	UDP InboundEndpointProtocol = "UDP"
)

// PossibleInboundEndpointProtocolValues returns an array of possible values for the InboundEndpointProtocol const type.
func PossibleInboundEndpointProtocolValues() []InboundEndpointProtocol {
	return []InboundEndpointProtocol{TCP, UDP}
}

// InterNodeCommunicationState enumerates the values for inter node communication state.
type InterNodeCommunicationState string

const (
	// Disabled Disable network communication between virtual machines.
	Disabled InterNodeCommunicationState = "Disabled"
	// Enabled Enable network communication between virtual machines.
	Enabled InterNodeCommunicationState = "Enabled"
)

// PossibleInterNodeCommunicationStateValues returns an array of possible values for the InterNodeCommunicationState const type.
func PossibleInterNodeCommunicationStateValues() []InterNodeCommunicationState {
	return []InterNodeCommunicationState{Disabled, Enabled}
}

// LoginMode enumerates the values for login mode.
type LoginMode string

const (
	// Batch The LOGON32_LOGON_BATCH Win32 login mode. The batch login mode is recommended for long running
	// parallel processes.
	Batch LoginMode = "Batch"
	// Interactive The LOGON32_LOGON_INTERACTIVE Win32 login mode. Some applications require having permissions
	// associated with the interactive login mode. If this is the case for an application used in your task,
	// then this option is recommended.
	Interactive LoginMode = "Interactive"
)

// PossibleLoginModeValues returns an array of possible values for the LoginMode const type.
func PossibleLoginModeValues() []LoginMode {
	return []LoginMode{Batch, Interactive}
}

// NameAvailabilityReason enumerates the values for name availability reason.
type NameAvailabilityReason string

const (
	// AlreadyExists The requested name is already in use.
	AlreadyExists NameAvailabilityReason = "AlreadyExists"
	// Invalid The requested name is invalid.
	Invalid NameAvailabilityReason = "Invalid"
)

// PossibleNameAvailabilityReasonValues returns an array of possible values for the NameAvailabilityReason const type.
func PossibleNameAvailabilityReasonValues() []NameAvailabilityReason {
	return []NameAvailabilityReason{AlreadyExists, Invalid}
}

// NetworkSecurityGroupRuleAccess enumerates the values for network security group rule access.
type NetworkSecurityGroupRuleAccess string

const (
	// Allow Allow access.
	Allow NetworkSecurityGroupRuleAccess = "Allow"
	// Deny Deny access.
	Deny NetworkSecurityGroupRuleAccess = "Deny"
)

// PossibleNetworkSecurityGroupRuleAccessValues returns an array of possible values for the NetworkSecurityGroupRuleAccess const type.
func PossibleNetworkSecurityGroupRuleAccessValues() []NetworkSecurityGroupRuleAccess {
	return []NetworkSecurityGroupRuleAccess{Allow, Deny}
}

// PackageState enumerates the values for package state.
type PackageState string

const (
	// Active The application package is ready for use.
	Active PackageState = "Active"
	// Pending The application package has been created but has not yet been activated.
	Pending PackageState = "Pending"
)

// PossiblePackageStateValues returns an array of possible values for the PackageState const type.
func PossiblePackageStateValues() []PackageState {
	return []PackageState{Active, Pending}
}

// PoolAllocationMode enumerates the values for pool allocation mode.
type PoolAllocationMode string

const (
	// BatchService Pools will be allocated in subscriptions owned by the Batch service.
	BatchService PoolAllocationMode = "BatchService"
	// UserSubscription Pools will be allocated in a subscription owned by the user.
	UserSubscription PoolAllocationMode = "UserSubscription"
)

// PossiblePoolAllocationModeValues returns an array of possible values for the PoolAllocationMode const type.
func PossiblePoolAllocationModeValues() []PoolAllocationMode {
	return []PoolAllocationMode{BatchService, UserSubscription}
}

// PoolProvisioningState enumerates the values for pool provisioning state.
type PoolProvisioningState string

const (
	// PoolProvisioningStateDeleting The user has requested that the pool be deleted, but the delete operation
	// has not yet completed.
	PoolProvisioningStateDeleting PoolProvisioningState = "Deleting"
	// PoolProvisioningStateSucceeded The pool is available to run tasks subject to the availability of compute
	// nodes.
	PoolProvisioningStateSucceeded PoolProvisioningState = "Succeeded"
)

// PossiblePoolProvisioningStateValues returns an array of possible values for the PoolProvisioningState const type.
func PossiblePoolProvisioningStateValues() []PoolProvisioningState {
	return []PoolProvisioningState{PoolProvisioningStateDeleting, PoolProvisioningStateSucceeded}
}

// ProvisioningState enumerates the values for provisioning state.
type ProvisioningState string

const (
	// ProvisioningStateCancelled The last operation for the account is cancelled.
	ProvisioningStateCancelled ProvisioningState = "Cancelled"
	// ProvisioningStateCreating The account is being created.
	ProvisioningStateCreating ProvisioningState = "Creating"
	// ProvisioningStateDeleting The account is being deleted.
	ProvisioningStateDeleting ProvisioningState = "Deleting"
	// ProvisioningStateFailed The last operation for the account is failed.
	ProvisioningStateFailed ProvisioningState = "Failed"
	// ProvisioningStateInvalid The account is in an invalid state.
	ProvisioningStateInvalid ProvisioningState = "Invalid"
	// ProvisioningStateSucceeded The account has been created and is ready for use.
	ProvisioningStateSucceeded ProvisioningState = "Succeeded"
)

// PossibleProvisioningStateValues returns an array of possible values for the ProvisioningState const type.
func PossibleProvisioningStateValues() []ProvisioningState {
	return []ProvisioningState{ProvisioningStateCancelled, ProvisioningStateCreating, ProvisioningStateDeleting, ProvisioningStateFailed, ProvisioningStateInvalid, ProvisioningStateSucceeded}
}

// StorageAccountType enumerates the values for storage account type.
type StorageAccountType string

const (
	// PremiumLRS The data disk should use premium locally redundant storage.
	PremiumLRS StorageAccountType = "Premium_LRS"
	// StandardLRS The data disk should use standard locally redundant storage.
	StandardLRS StorageAccountType = "Standard_LRS"
)

// PossibleStorageAccountTypeValues returns an array of possible values for the StorageAccountType const type.
func PossibleStorageAccountTypeValues() []StorageAccountType {
	return []StorageAccountType{PremiumLRS, StandardLRS}
}

// Account contains information about an Azure Batch account.
type Account struct {
	autorest.Response `json:"-"`
	// AccountProperties - The properties associated with the account.
	*AccountProperties `json:"properties,omitempty"`
	// ID - READ-ONLY; The ID of the resource.
	ID *string `json:"id,omitempty"`
	// Name - READ-ONLY; The name of the resource.
	Name *string `json:"name,omitempty"`
	// Type - READ-ONLY; The type of the resource.
	Type *string `json:"type,omitempty"`
	// Location - READ-ONLY; The location of the resource.
	Location *string `json:"location,omitempty"`
	// Tags - READ-ONLY; The tags of the resource.
	Tags map[string]*string `json:"tags"`
}

// MarshalJSON is the custom marshaler for Account.
func (a Account) MarshalJSON() ([]byte, error) {
	objectMap := make(map[string]interface{})
	if a.AccountProperties != nil {
		objectMap["properties"] = a.AccountProperties
	}
	return json.Marshal(objectMap)
}

// UnmarshalJSON is the custom unmarshaler for Account struct.
func (a *Account) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	for k, v := range m {
		switch k {
		case "properties":
			if v != nil {
				var accountProperties AccountProperties
				err = json.Unmarshal(*v, &accountProperties)
				if err != nil {
					return err
				}
				a.AccountProperties = &accountProperties
			}
		case "id":
			if v != nil {
				var ID string
				err = json.Unmarshal(*v, &ID)
				if err != nil {
					return err
				}
				a.ID = &ID
			}
		case "name":
			if v != nil {
				var name string
				err = json.Unmarshal(*v, &name)
				if err != nil {
					return err
				}
				a.Name = &name
			}
		case "type":
			if v != nil {
				var typeVar string
				err = json.Unmarshal(*v, &typeVar)
				if err != nil {
					return err
				}
				a.Type = &typeVar
			}
		case "location":
			if v != nil {
				var location string
				err = json.Unmarshal(*v, &location)
				if err != nil {
					return err
				}
				a.Location = &location
			}
		case "tags":
			if v != nil {
				var tags map[string]*string
				err = json.Unmarshal(*v, &tags)
				if err != nil {
					return err
				}
				a.Tags = tags
			}
		}
	}

	return nil
}

// AccountCreateFuture an abstraction for monitoring and retrieving the results of a long-running
// operation.
type AccountCreateFuture struct {
	azure.Future
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future *AccountCreateFuture) Result(client AccountClient) (a Account, err error) {
	var done bool
	done, err = future.DoneWithContext(context.Background(), client)
	if err != nil {
		err = autorest.NewErrorWithError(err, "batch.AccountCreateFuture", "Result", future.Response(), "Polling failure")
		return
	}
	if !done {
		err = azure.NewAsyncOpIncompleteError("batch.AccountCreateFuture")
		return
	}
	sender := autorest.DecorateSender(client, autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if a.Response.Response, err = future.GetResult(sender); err == nil && a.Response.Response.StatusCode != http.StatusNoContent {
		a, err = client.CreateResponder(a.Response.Response)
		if err != nil {
			err = autorest.NewErrorWithError(err, "batch.AccountCreateFuture", "Result", a.Response.Response, "Failure responding to request")
		}
	}
	return
}

// AccountCreateParameters parameters supplied to the Create operation.
type AccountCreateParameters struct {
	// Location - The region in which to create the account.
	Location *string `json:"location,omitempty"`
	// Tags - The user-specified tags associated with the account.
	Tags map[string]*string `json:"tags"`
	// AccountCreateProperties - The properties of the Batch account.
	*AccountCreateProperties `json:"properties,omitempty"`
}

// MarshalJSON is the custom marshaler for AccountCreateParameters.
func (acp AccountCreateParameters) MarshalJSON() ([]byte, error) {
	objectMap := make(map[string]interface{})
	if acp.Location != nil {
		objectMap["location"] = acp.Location
	}
	if acp.Tags != nil {
		objectMap["tags"] = acp.Tags
	}
	if acp.AccountCreateProperties != nil {
		objectMap["properties"] = acp.AccountCreateProperties
	}
	return json.Marshal(objectMap)
}

// UnmarshalJSON is the custom unmarshaler for AccountCreateParameters struct.
func (acp *AccountCreateParameters) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	for k, v := range m {
		switch k {
		case "location":
			if v != nil {
				var location string
				err = json.Unmarshal(*v, &location)
				if err != nil {
					return err
				}
				acp.Location = &location
			}
		case "tags":
			if v != nil {
				var tags map[string]*string
				err = json.Unmarshal(*v, &tags)
				if err != nil {
					return err
				}
				acp.Tags = tags
			}
		case "properties":
			if v != nil {
				var accountCreateProperties AccountCreateProperties
				err = json.Unmarshal(*v, &accountCreateProperties)
				if err != nil {
					return err
				}
				acp.AccountCreateProperties = &accountCreateProperties
			}
		}
	}

	return nil
}

// AccountCreateProperties the properties of a Batch account.
type AccountCreateProperties struct {
	// AutoStorage - The properties related to the auto-storage account.
	AutoStorage *AutoStorageBaseProperties `json:"autoStorage,omitempty"`
	// PoolAllocationMode - The pool allocation mode also affects how clients may authenticate to the Batch Service API. If the mode is BatchService, clients may authenticate using access keys or Azure Active Directory. If the mode is UserSubscription, clients must use Azure Active Directory. The default is BatchService. Possible values include: 'BatchService', 'UserSubscription'
	PoolAllocationMode PoolAllocationMode `json:"poolAllocationMode,omitempty"`
	// KeyVaultReference - A reference to the Azure key vault associated with the Batch account.
	KeyVaultReference *KeyVaultReference `json:"keyVaultReference,omitempty"`
}

// AccountDeleteFuture an abstraction for monitoring and retrieving the results of a long-running
// operation.
type AccountDeleteFuture struct {
	azure.Future
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future *AccountDeleteFuture) Result(client AccountClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.DoneWithContext(context.Background(), client)
	if err != nil {
		err = autorest.NewErrorWithError(err, "batch.AccountDeleteFuture", "Result", future.Response(), "Polling failure")
		return
	}
	if !done {
		err = azure.NewAsyncOpIncompleteError("batch.AccountDeleteFuture")
		return
	}
	ar.Response = future.Response()
	return
}

// AccountKeys a set of Azure Batch account keys.
type AccountKeys struct {
	autorest.Response `json:"-"`
	// AccountName - READ-ONLY; The Batch account name.
	AccountName *string `json:"accountName,omitempty"`
	// Primary - READ-ONLY; The primary key associated with the account.
	Primary *string `json:"primary,omitempty"`
	// Secondary - READ-ONLY; The secondary key associated with the account.
	Secondary *string `json:"secondary,omitempty"`
}

// AccountListResult values returned by the List operation.
type AccountListResult struct {
	autorest.Response `json:"-"`
	// Value - The collection of Batch accounts returned by the listing operation.
	Value *[]Account `json:"value,omitempty"`
	// NextLink - The continuation token.
	NextLink *string `json:"nextLink,omitempty"`
}

// AccountListResultIterator provides access to a complete listing of Account values.
type AccountListResultIterator struct {
	i    int
	page AccountListResultPage
}

// NextWithContext advances to the next value.  If there was an error making
// the request the iterator does not advance and the error is returned.
func (iter *AccountListResultIterator) NextWithContext(ctx context.Context) (err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/AccountListResultIterator.NextWithContext")
		defer func() {
			sc := -1
			if iter.Response().Response.Response != nil {
				sc = iter.Response().Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	iter.i++
	if iter.i < len(iter.page.Values()) {
		return nil
	}
	err = iter.page.NextWithContext(ctx)
	if err != nil {
		iter.i--
		return err
	}
	iter.i = 0
	return nil
}

// Next advances to the next value.  If there was an error making
// the request the iterator does not advance and the error is returned.
// Deprecated: Use NextWithContext() instead.
func (iter *AccountListResultIterator) Next() error {
	return iter.NextWithContext(context.Background())
}

// NotDone returns true if the enumeration should be started or is not yet complete.
func (iter AccountListResultIterator) NotDone() bool {
	return iter.page.NotDone() && iter.i < len(iter.page.Values())
}

// Response returns the raw server response from the last page request.
func (iter AccountListResultIterator) Response() AccountListResult {
	return iter.page.Response()
}

// Value returns the current value or a zero-initialized value if the
// iterator has advanced beyond the end of the collection.
func (iter AccountListResultIterator) Value() Account {
	if !iter.page.NotDone() {
		return Account{}
	}
	return iter.page.Values()[iter.i]
}

// Creates a new instance of the AccountListResultIterator type.
func NewAccountListResultIterator(page AccountListResultPage) AccountListResultIterator {
	return AccountListResultIterator{page: page}
}

// IsEmpty returns true if the ListResult contains no values.
func (alr AccountListResult) IsEmpty() bool {
	return alr.Value == nil || len(*alr.Value) == 0
}

// accountListResultPreparer prepares a request to retrieve the next set of results.
// It returns nil if no more results exist.
func (alr AccountListResult) accountListResultPreparer(ctx context.Context) (*http.Request, error) {
	if alr.NextLink == nil || len(to.String(alr.NextLink)) < 1 {
		return nil, nil
	}
	return autorest.Prepare((&http.Request{}).WithContext(ctx),
		autorest.AsJSON(),
		autorest.AsGet(),
		autorest.WithBaseURL(to.String(alr.NextLink)))
}

// AccountListResultPage contains a page of Account values.
type AccountListResultPage struct {
	fn  func(context.Context, AccountListResult) (AccountListResult, error)
	alr AccountListResult
}

// NextWithContext advances to the next page of values.  If there was an error making
// the request the page does not advance and the error is returned.
func (page *AccountListResultPage) NextWithContext(ctx context.Context) (err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/AccountListResultPage.NextWithContext")
		defer func() {
			sc := -1
			if page.Response().Response.Response != nil {
				sc = page.Response().Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	next, err := page.fn(ctx, page.alr)
	if err != nil {
		return err
	}
	page.alr = next
	return nil
}

// Next advances to the next page of values.  If there was an error making
// the request the page does not advance and the error is returned.
// Deprecated: Use NextWithContext() instead.
func (page *AccountListResultPage) Next() error {
	return page.NextWithContext(context.Background())
}

// NotDone returns true if the page enumeration should be started or is not yet complete.
func (page AccountListResultPage) NotDone() bool {
	return !page.alr.IsEmpty()
}

// Response returns the raw server response from the last page request.
func (page AccountListResultPage) Response() AccountListResult {
	return page.alr
}

// Values returns the slice of values for the current page or nil if there are no values.
func (page AccountListResultPage) Values() []Account {
	if page.alr.IsEmpty() {
		return nil
	}
	return *page.alr.Value
}

// Creates a new instance of the AccountListResultPage type.
func NewAccountListResultPage(getNextPage func(context.Context, AccountListResult) (AccountListResult, error)) AccountListResultPage {
	return AccountListResultPage{fn: getNextPage}
}

// AccountProperties account specific properties.
type AccountProperties struct {
	// AccountEndpoint - READ-ONLY; The account endpoint used to interact with the Batch service.
	AccountEndpoint *string `json:"accountEndpoint,omitempty"`
	// ProvisioningState - READ-ONLY; The provisioned state of the resource. Possible values include: 'ProvisioningStateInvalid', 'ProvisioningStateCreating', 'ProvisioningStateDeleting', 'ProvisioningStateSucceeded', 'ProvisioningStateFailed', 'ProvisioningStateCancelled'
	ProvisioningState ProvisioningState `json:"provisioningState,omitempty"`
	// PoolAllocationMode - READ-ONLY; Possible values include: 'BatchService', 'UserSubscription'
	PoolAllocationMode PoolAllocationMode `json:"poolAllocationMode,omitempty"`
	// KeyVaultReference - READ-ONLY
	KeyVaultReference *KeyVaultReference `json:"keyVaultReference,omitempty"`
	// AutoStorage - READ-ONLY
	AutoStorage *AutoStorageProperties `json:"autoStorage,omitempty"`
	// DedicatedCoreQuota - READ-ONLY; For accounts with PoolAllocationMode set to UserSubscription, quota is managed on the subscription so this value is not returned.
	DedicatedCoreQuota *int32 `json:"dedicatedCoreQuota,omitempty"`
	// LowPriorityCoreQuota - READ-ONLY; For accounts with PoolAllocationMode set to UserSubscription, quota is managed on the subscription so this value is not returned.
	LowPriorityCoreQuota *int32 `json:"lowPriorityCoreQuota,omitempty"`
	// DedicatedCoreQuotaPerVMFamily - READ-ONLY; A list of the dedicated core quota per Virtual Machine family for the Batch account. For accounts with PoolAllocationMode set to UserSubscription, quota is managed on the subscription so this value is not returned.
	DedicatedCoreQuotaPerVMFamily *[]VirtualMachineFamilyCoreQuota `json:"dedicatedCoreQuotaPerVMFamily,omitempty"`
	// DedicatedCoreQuotaPerVMFamilyEnforced - READ-ONLY; Batch is transitioning its core quota system for dedicated cores to be enforced per Virtual Machine family. During this transitional phase, the dedicated core quota per Virtual Machine family may not yet be enforced. If this flag is false, dedicated core quota is enforced via the old dedicatedCoreQuota property on the account and does not consider Virtual Machine family. If this flag is true, dedicated core quota is enforced via the dedicatedCoreQuotaPerVMFamily property on the account, and the old dedicatedCoreQuota does not apply.
	DedicatedCoreQuotaPerVMFamilyEnforced *bool `json:"dedicatedCoreQuotaPerVMFamilyEnforced,omitempty"`
	// PoolQuota - READ-ONLY
	PoolQuota *int32 `json:"poolQuota,omitempty"`
	// ActiveJobAndJobScheduleQuota - READ-ONLY
	ActiveJobAndJobScheduleQuota *int32 `json:"activeJobAndJobScheduleQuota,omitempty"`
}

// AccountRegenerateKeyParameters parameters supplied to the RegenerateKey operation.
type AccountRegenerateKeyParameters struct {
	// KeyName - The type of account key to regenerate. Possible values include: 'Primary', 'Secondary'
	KeyName AccountKeyType `json:"keyName,omitempty"`
}

// AccountUpdateParameters parameters for updating an Azure Batch account.
type AccountUpdateParameters struct {
	// Tags - The user-specified tags associated with the account.
	Tags map[string]*string `json:"tags"`
	// AccountUpdateProperties - The properties of the account.
	*AccountUpdateProperties `json:"properties,omitempty"`
}

// MarshalJSON is the custom marshaler for AccountUpdateParameters.
func (aup AccountUpdateParameters) MarshalJSON() ([]byte, error) {
	objectMap := make(map[string]interface{})
	if aup.Tags != nil {
		objectMap["tags"] = aup.Tags
	}
	if aup.AccountUpdateProperties != nil {
		objectMap["properties"] = aup.AccountUpdateProperties
	}
	return json.Marshal(objectMap)
}

// UnmarshalJSON is the custom unmarshaler for AccountUpdateParameters struct.
func (aup *AccountUpdateParameters) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	for k, v := range m {
		switch k {
		case "tags":
			if v != nil {
				var tags map[string]*string
				err = json.Unmarshal(*v, &tags)
				if err != nil {
					return err
				}
				aup.Tags = tags
			}
		case "properties":
			if v != nil {
				var accountUpdateProperties AccountUpdateProperties
				err = json.Unmarshal(*v, &accountUpdateProperties)
				if err != nil {
					return err
				}
				aup.AccountUpdateProperties = &accountUpdateProperties
			}
		}
	}

	return nil
}

// AccountUpdateProperties the properties of a Batch account.
type AccountUpdateProperties struct {
	// AutoStorage - The properties related to the auto-storage account.
	AutoStorage *AutoStorageBaseProperties `json:"autoStorage,omitempty"`
}

// ActivateApplicationPackageParameters parameters for an activating an application package.
type ActivateApplicationPackageParameters struct {
	// Format - The format of the application package binary file.
	Format *string `json:"format,omitempty"`
}

// Application contains information about an application in a Batch account.
type Application struct {
	autorest.Response `json:"-"`
	// ApplicationProperties - The properties associated with the Application.
	*ApplicationProperties `json:"properties,omitempty"`
	// ID - READ-ONLY; The ID of the resource.
	ID *string `json:"id,omitempty"`
	// Name - READ-ONLY; The name of the resource.
	Name *string `json:"name,omitempty"`
	// Type - READ-ONLY; The type of the resource.
	Type *string `json:"type,omitempty"`
	// Etag - READ-ONLY; The ETag of the resource, used for concurrency statements.
	Etag *string `json:"etag,omitempty"`
}

// MarshalJSON is the custom marshaler for Application.
func (a Application) MarshalJSON() ([]byte, error) {
	objectMap := make(map[string]interface{})
	if a.ApplicationProperties != nil {
		objectMap["properties"] = a.ApplicationProperties
	}
	return json.Marshal(objectMap)
}

// UnmarshalJSON is the custom unmarshaler for Application struct.
func (a *Application) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	for k, v := range m {
		switch k {
		case "properties":
			if v != nil {
				var applicationProperties ApplicationProperties
				err = json.Unmarshal(*v, &applicationProperties)
				if err != nil {
					return err
				}
				a.ApplicationProperties = &applicationProperties
			}
		case "id":
			if v != nil {
				var ID string
				err = json.Unmarshal(*v, &ID)
				if err != nil {
					return err
				}
				a.ID = &ID
			}
		case "name":
			if v != nil {
				var name string
				err = json.Unmarshal(*v, &name)
				if err != nil {
					return err
				}
				a.Name = &name
			}
		case "type":
			if v != nil {
				var typeVar string
				err = json.Unmarshal(*v, &typeVar)
				if err != nil {
					return err
				}
				a.Type = &typeVar
			}
		case "etag":
			if v != nil {
				var etag string
				err = json.Unmarshal(*v, &etag)
				if err != nil {
					return err
				}
				a.Etag = &etag
			}
		}
	}

	return nil
}

// ApplicationPackage an application package which represents a particular version of an application.
type ApplicationPackage struct {
	autorest.Response `json:"-"`
	// ApplicationPackageProperties - The properties associated with the Application Package.
	*ApplicationPackageProperties `json:"properties,omitempty"`
	// ID - READ-ONLY; The ID of the resource.
	ID *string `json:"id,omitempty"`
	// Name - READ-ONLY; The name of the resource.
	Name *string `json:"name,omitempty"`
	// Type - READ-ONLY; The type of the resource.
	Type *string `json:"type,omitempty"`
	// Etag - READ-ONLY; The ETag of the resource, used for concurrency statements.
	Etag *string `json:"etag,omitempty"`
}

// MarshalJSON is the custom marshaler for ApplicationPackage.
func (ap ApplicationPackage) MarshalJSON() ([]byte, error) {
	objectMap := make(map[string]interface{})
	if ap.ApplicationPackageProperties != nil {
		objectMap["properties"] = ap.ApplicationPackageProperties
	}
	return json.Marshal(objectMap)
}

// UnmarshalJSON is the custom unmarshaler for ApplicationPackage struct.
func (ap *ApplicationPackage) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	for k, v := range m {
		switch k {
		case "properties":
			if v != nil {
				var applicationPackageProperties ApplicationPackageProperties
				err = json.Unmarshal(*v, &applicationPackageProperties)
				if err != nil {
					return err
				}
				ap.ApplicationPackageProperties = &applicationPackageProperties
			}
		case "id":
			if v != nil {
				var ID string
				err = json.Unmarshal(*v, &ID)
				if err != nil {
					return err
				}
				ap.ID = &ID
			}
		case "name":
			if v != nil {
				var name string
				err = json.Unmarshal(*v, &name)
				if err != nil {
					return err
				}
				ap.Name = &name
			}
		case "type":
			if v != nil {
				var typeVar string
				err = json.Unmarshal(*v, &typeVar)
				if err != nil {
					return err
				}
				ap.Type = &typeVar
			}
		case "etag":
			if v != nil {
				var etag string
				err = json.Unmarshal(*v, &etag)
				if err != nil {
					return err
				}
				ap.Etag = &etag
			}
		}
	}

	return nil
}

// ApplicationPackageProperties properties of an application package
type ApplicationPackageProperties struct {
	// State - READ-ONLY; The current state of the application package. Possible values include: 'Pending', 'Active'
	State PackageState `json:"state,omitempty"`
	// Format - READ-ONLY; The format of the application package, if the package is active.
	Format *string `json:"format,omitempty"`
	// StorageURL - READ-ONLY; The URL for the application package in Azure Storage.
	StorageURL *string `json:"storageUrl,omitempty"`
	// StorageURLExpiry - READ-ONLY; The UTC time at which the Azure Storage URL will expire.
	StorageURLExpiry *date.Time `json:"storageUrlExpiry,omitempty"`
	// LastActivationTime - READ-ONLY; The time at which the package was last activated, if the package is active.
	LastActivationTime *date.Time `json:"lastActivationTime,omitempty"`
}

// ApplicationPackageReference ...
type ApplicationPackageReference struct {
	ID *string `json:"id,omitempty"`
	// Version - If this is omitted, and no default version is specified for this application, the request fails with the error code InvalidApplicationPackageReferences. If you are calling the REST API directly, the HTTP status code is 409.
	Version *string `json:"version,omitempty"`
}

// ApplicationProperties the properties associated with the Application.
type ApplicationProperties struct {
	// DisplayName - The display name for the application.
	DisplayName *string `json:"displayName,omitempty"`
	// AllowUpdates - A value indicating whether packages within the application may be overwritten using the same version string.
	AllowUpdates *bool `json:"allowUpdates,omitempty"`
	// DefaultVersion - The package to use if a client requests the application but does not specify a version. This property can only be set to the name of an existing package.
	DefaultVersion *string `json:"defaultVersion,omitempty"`
}

// AutoScaleRun ...
type AutoScaleRun struct {
	EvaluationTime *date.Time `json:"evaluationTime,omitempty"`
	// Results - Each variable value is returned in the form $variable=value, and variables are separated by semicolons.
	Results *string            `json:"results,omitempty"`
	Error   *AutoScaleRunError `json:"error,omitempty"`
}

// AutoScaleRunError ...
type AutoScaleRunError struct {
	// Code - An identifier for the error. Codes are invariant and are intended to be consumed programmatically.
	Code *string `json:"code,omitempty"`
	// Message - A message describing the error, intended to be suitable for display in a user interface.
	Message *string              `json:"message,omitempty"`
	Details *[]AutoScaleRunError `json:"details,omitempty"`
}

// AutoScaleSettings ...
type AutoScaleSettings struct {
	Formula *string `json:"formula,omitempty"`
	// EvaluationInterval - If omitted, the default value is 15 minutes (PT15M).
	EvaluationInterval *string `json:"evaluationInterval,omitempty"`
}

// AutoStorageBaseProperties the properties related to the auto-storage account.
type AutoStorageBaseProperties struct {
	// StorageAccountID - The resource ID of the storage account to be used for auto-storage account.
	StorageAccountID *string `json:"storageAccountId,omitempty"`
}

// AutoStorageProperties contains information about the auto-storage account associated with a Batch
// account.
type AutoStorageProperties struct {
	// LastKeySync - The UTC time at which storage keys were last synchronized with the Batch account.
	LastKeySync *date.Time `json:"lastKeySync,omitempty"`
	// StorageAccountID - The resource ID of the storage account to be used for auto-storage account.
	StorageAccountID *string `json:"storageAccountId,omitempty"`
}

// AutoUserSpecification ...
type AutoUserSpecification struct {
	// Scope - The default value is task. Possible values include: 'AutoUserScopeTask', 'AutoUserScopePool'
	Scope AutoUserScope `json:"scope,omitempty"`
	// ElevationLevel - nonAdmin - The auto user is a standard user without elevated access. admin - The auto user is a user with elevated access and operates with full Administrator permissions. The default value is nonAdmin. Possible values include: 'NonAdmin', 'Admin'
	ElevationLevel ElevationLevel `json:"elevationLevel,omitempty"`
}

// Certificate contains information about a certificate.
type Certificate struct {
	autorest.Response `json:"-"`
	// CertificateProperties - The properties associated with the certificate.
	*CertificateProperties `json:"properties,omitempty"`
	// ID - READ-ONLY; The ID of the resource.
	ID *string `json:"id,omitempty"`
	// Name - READ-ONLY; The name of the resource.
	Name *string `json:"name,omitempty"`
	// Type - READ-ONLY; The type of the resource.
	Type *string `json:"type,omitempty"`
	// Etag - READ-ONLY; The ETag of the resource, used for concurrency statements.
	Etag *string `json:"etag,omitempty"`
}

// MarshalJSON is the custom marshaler for Certificate.
func (c Certificate) MarshalJSON() ([]byte, error) {
	objectMap := make(map[string]interface{})
	if c.CertificateProperties != nil {
		objectMap["properties"] = c.CertificateProperties
	}
	return json.Marshal(objectMap)
}

// UnmarshalJSON is the custom unmarshaler for Certificate struct.
func (c *Certificate) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	for k, v := range m {
		switch k {
		case "properties":
			if v != nil {
				var certificateProperties CertificateProperties
				err = json.Unmarshal(*v, &certificateProperties)
				if err != nil {
					return err
				}
				c.CertificateProperties = &certificateProperties
			}
		case "id":
			if v != nil {
				var ID string
				err = json.Unmarshal(*v, &ID)
				if err != nil {
					return err
				}
				c.ID = &ID
			}
		case "name":
			if v != nil {
				var name string
				err = json.Unmarshal(*v, &name)
				if err != nil {
					return err
				}
				c.Name = &name
			}
		case "type":
			if v != nil {
				var typeVar string
				err = json.Unmarshal(*v, &typeVar)
				if err != nil {
					return err
				}
				c.Type = &typeVar
			}
		case "etag":
			if v != nil {
				var etag string
				err = json.Unmarshal(*v, &etag)
				if err != nil {
					return err
				}
				c.Etag = &etag
			}
		}
	}

	return nil
}

// CertificateBaseProperties ...
type CertificateBaseProperties struct {
	// ThumbprintAlgorithm - This must match the first portion of the certificate name. Currently required to be 'SHA1'.
	ThumbprintAlgorithm *string `json:"thumbprintAlgorithm,omitempty"`
	// Thumbprint - This must match the thumbprint from the name.
	Thumbprint *string `json:"thumbprint,omitempty"`
	// Format - The format of the certificate - either Pfx or Cer. If omitted, the default is Pfx. Possible values include: 'Pfx', 'Cer'
	Format CertificateFormat `json:"format,omitempty"`
}

// CertificateCreateFuture an abstraction for monitoring and retrieving the results of a long-running
// operation.
type CertificateCreateFuture struct {
	azure.Future
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future *CertificateCreateFuture) Result(client CertificateClient) (c Certificate, err error) {
	var done bool
	done, err = future.DoneWithContext(context.Background(), client)
	if err != nil {
		err = autorest.NewErrorWithError(err, "batch.CertificateCreateFuture", "Result", future.Response(), "Polling failure")
		return
	}
	if !done {
		err = azure.NewAsyncOpIncompleteError("batch.CertificateCreateFuture")
		return
	}
	sender := autorest.DecorateSender(client, autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if c.Response.Response, err = future.GetResult(sender); err == nil && c.Response.Response.StatusCode != http.StatusNoContent {
		c, err = client.CreateResponder(c.Response.Response)
		if err != nil {
			err = autorest.NewErrorWithError(err, "batch.CertificateCreateFuture", "Result", c.Response.Response, "Failure responding to request")
		}
	}
	return
}

// CertificateCreateOrUpdateParameters contains information about a certificate.
type CertificateCreateOrUpdateParameters struct {
	// CertificateCreateOrUpdateProperties - The properties associated with the certificate.
	*CertificateCreateOrUpdateProperties `json:"properties,omitempty"`
	// ID - READ-ONLY; The ID of the resource.
	ID *string `json:"id,omitempty"`
	// Name - READ-ONLY; The name of the resource.
	Name *string `json:"name,omitempty"`
	// Type - READ-ONLY; The type of the resource.
	Type *string `json:"type,omitempty"`
	// Etag - READ-ONLY; The ETag of the resource, used for concurrency statements.
	Etag *string `json:"etag,omitempty"`
}

// MarshalJSON is the custom marshaler for CertificateCreateOrUpdateParameters.
func (ccoup CertificateCreateOrUpdateParameters) MarshalJSON() ([]byte, error) {
	objectMap := make(map[string]interface{})
	if ccoup.CertificateCreateOrUpdateProperties != nil {
		objectMap["properties"] = ccoup.CertificateCreateOrUpdateProperties
	}
	return json.Marshal(objectMap)
}

// UnmarshalJSON is the custom unmarshaler for CertificateCreateOrUpdateParameters struct.
func (ccoup *CertificateCreateOrUpdateParameters) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	for k, v := range m {
		switch k {
		case "properties":
			if v != nil {
				var certificateCreateOrUpdateProperties CertificateCreateOrUpdateProperties
				err = json.Unmarshal(*v, &certificateCreateOrUpdateProperties)
				if err != nil {
					return err
				}
				ccoup.CertificateCreateOrUpdateProperties = &certificateCreateOrUpdateProperties
			}
		case "id":
			if v != nil {
				var ID string
				err = json.Unmarshal(*v, &ID)
				if err != nil {
					return err
				}
				ccoup.ID = &ID
			}
		case "name":
			if v != nil {
				var name string
				err = json.Unmarshal(*v, &name)
				if err != nil {
					return err
				}
				ccoup.Name = &name
			}
		case "type":
			if v != nil {
				var typeVar string
				err = json.Unmarshal(*v, &typeVar)
				if err != nil {
					return err
				}
				ccoup.Type = &typeVar
			}
		case "etag":
			if v != nil {
				var etag string
				err = json.Unmarshal(*v, &etag)
				if err != nil {
					return err
				}
				ccoup.Etag = &etag
			}
		}
	}

	return nil
}

// CertificateCreateOrUpdateProperties certificate properties for create operations
type CertificateCreateOrUpdateProperties struct {
	// Data - The maximum size is 10KB.
	Data *string `json:"data,omitempty"`
	// Password - This is required if the certificate format is pfx and must be omitted if the certificate format is cer.
	Password *string `json:"password,omitempty"`
	// ThumbprintAlgorithm - This must match the first portion of the certificate name. Currently required to be 'SHA1'.
	ThumbprintAlgorithm *string `json:"thumbprintAlgorithm,omitempty"`
	// Thumbprint - This must match the thumbprint from the name.
	Thumbprint *string `json:"thumbprint,omitempty"`
	// Format - The format of the certificate - either Pfx or Cer. If omitted, the default is Pfx. Possible values include: 'Pfx', 'Cer'
	Format CertificateFormat `json:"format,omitempty"`
}

// CertificateDeleteFuture an abstraction for monitoring and retrieving the results of a long-running
// operation.
type CertificateDeleteFuture struct {
	azure.Future
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future *CertificateDeleteFuture) Result(client CertificateClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.DoneWithContext(context.Background(), client)
	if err != nil {
		err = autorest.NewErrorWithError(err, "batch.CertificateDeleteFuture", "Result", future.Response(), "Polling failure")
		return
	}
	if !done {
		err = azure.NewAsyncOpIncompleteError("batch.CertificateDeleteFuture")
		return
	}
	ar.Response = future.Response()
	return
}

// CertificateProperties certificate properties.
type CertificateProperties struct {
	// ProvisioningState - READ-ONLY; Possible values include: 'Succeeded', 'Deleting', 'Failed'
	ProvisioningState CertificateProvisioningState `json:"provisioningState,omitempty"`
	// ProvisioningStateTransitionTime - READ-ONLY
	ProvisioningStateTransitionTime *date.Time `json:"provisioningStateTransitionTime,omitempty"`
	// PreviousProvisioningState - READ-ONLY; The previous provisioned state of the resource. Possible values include: 'Succeeded', 'Deleting', 'Failed'
	PreviousProvisioningState CertificateProvisioningState `json:"previousProvisioningState,omitempty"`
	// PreviousProvisioningStateTransitionTime - READ-ONLY
	PreviousProvisioningStateTransitionTime *date.Time `json:"previousProvisioningStateTransitionTime,omitempty"`
	// PublicData - READ-ONLY; The public key of the certificate.
	PublicData *string `json:"publicData,omitempty"`
	// DeleteCertificateError - READ-ONLY; This is only returned when the certificate provisioningState is 'Failed'.
	DeleteCertificateError *DeleteCertificateError `json:"deleteCertificateError,omitempty"`
	// ThumbprintAlgorithm - This must match the first portion of the certificate name. Currently required to be 'SHA1'.
	ThumbprintAlgorithm *string `json:"thumbprintAlgorithm,omitempty"`
	// Thumbprint - This must match the thumbprint from the name.
	Thumbprint *string `json:"thumbprint,omitempty"`
	// Format - The format of the certificate - either Pfx or Cer. If omitted, the default is Pfx. Possible values include: 'Pfx', 'Cer'
	Format CertificateFormat `json:"format,omitempty"`
}

// CertificateReference ...
type CertificateReference struct {
	ID *string `json:"id,omitempty"`
	// StoreLocation - The default value is currentUser. This property is applicable only for pools configured with Windows nodes (that is, created with cloudServiceConfiguration, or with virtualMachineConfiguration using a Windows image reference). For Linux compute nodes, the certificates are stored in a directory inside the task working directory and an environment variable AZ_BATCH_CERTIFICATES_DIR is supplied to the task to query for this location. For certificates with visibility of 'remoteUser', a 'certs' directory is created in the user's home directory (e.g., /home/{user-name}/certs) and certificates are placed in that directory. Possible values include: 'CurrentUser', 'LocalMachine'
	StoreLocation CertificateStoreLocation `json:"storeLocation,omitempty"`
	// StoreName - This property is applicable only for pools configured with Windows nodes (that is, created with cloudServiceConfiguration, or with virtualMachineConfiguration using a Windows image reference). Common store names include: My, Root, CA, Trust, Disallowed, TrustedPeople, TrustedPublisher, AuthRoot, AddressBook, but any custom store name can also be used. The default value is My.
	StoreName  *string                  `json:"storeName,omitempty"`
	Visibility *[]CertificateVisibility `json:"visibility,omitempty"`
}

// CheckNameAvailabilityParameters parameters for a check name availability request.
type CheckNameAvailabilityParameters struct {
	// Name - The name to check for availability
	Name *string `json:"name,omitempty"`
	// Type - The resource type. Must be set to Microsoft.Batch/batchAccounts
	Type *string `json:"type,omitempty"`
}

// CheckNameAvailabilityResult the CheckNameAvailability operation response.
type CheckNameAvailabilityResult struct {
	autorest.Response `json:"-"`
	// NameAvailable - READ-ONLY; Gets a boolean value that indicates whether the name is available for you to use. If true, the name is available. If false, the name has already been taken or invalid and cannot be used.
	NameAvailable *bool `json:"nameAvailable,omitempty"`
	// Reason - READ-ONLY; Gets the reason that a Batch account name could not be used. The Reason element is only returned if NameAvailable is false. Possible values include: 'Invalid', 'AlreadyExists'
	Reason NameAvailabilityReason `json:"reason,omitempty"`
	// Message - READ-ONLY; Gets an error message explaining the Reason value in more detail.
	Message *string `json:"message,omitempty"`
}

// CloudError an error response from the Batch service.
type CloudError struct {
	Error *CloudErrorBody `json:"error,omitempty"`
}

// CloudErrorBody an error response from the Batch service.
type CloudErrorBody struct {
	// Code - An identifier for the error. Codes are invariant and are intended to be consumed programmatically.
	Code *string `json:"code,omitempty"`
	// Message - A message describing the error, intended to be suitable for display in a user interface.
	Message *string `json:"message,omitempty"`
	// Target - The target of the particular error. For example, the name of the property in error.
	Target *string `json:"target,omitempty"`
	// Details - A list of additional details about the error.
	Details *[]CloudErrorBody `json:"details,omitempty"`
}

// CloudServiceConfiguration ...
type CloudServiceConfiguration struct {
	// OsFamily - Possible values are: 2 - OS Family 2, equivalent to Windows Server 2008 R2 SP1. 3 - OS Family 3, equivalent to Windows Server 2012. 4 - OS Family 4, equivalent to Windows Server 2012 R2. 5 - OS Family 5, equivalent to Windows Server 2016. 6 - OS Family 6, equivalent to Windows Server 2019. For more information, see Azure Guest OS Releases (https://azure.microsoft.com/documentation/articles/cloud-services-guestos-update-matrix/#releases).
	OsFamily *string `json:"osFamily,omitempty"`
	// OsVersion - The default value is * which specifies the latest operating system version for the specified OS family.
	OsVersion *string `json:"osVersion,omitempty"`
}

// ContainerConfiguration ...
type ContainerConfiguration struct {
	Type *string `json:"type,omitempty"`
	// ContainerImageNames - This is the full image reference, as would be specified to "docker pull". An image will be sourced from the default Docker registry unless the image is fully qualified with an alternative registry.
	ContainerImageNames *[]string `json:"containerImageNames,omitempty"`
	// ContainerRegistries - If any images must be downloaded from a private registry which requires credentials, then those credentials must be provided here.
	ContainerRegistries *[]ContainerRegistry `json:"containerRegistries,omitempty"`
}

// ContainerRegistry ...
type ContainerRegistry struct {
	// RegistryServer - If omitted, the default is "docker.io".
	RegistryServer *string `json:"registryServer,omitempty"`
	UserName       *string `json:"username,omitempty"`
	Password       *string `json:"password,omitempty"`
}

// DataDisk data Disk settings which will be used by the data disks associated to Compute Nodes in the
// pool.
type DataDisk struct {
	// Lun - The lun is used to uniquely identify each data disk. If attaching multiple disks, each should have a distinct lun.
	Lun *int32 `json:"lun,omitempty"`
	// Caching - Values are:
	//  none - The caching mode for the disk is not enabled.
	//  readOnly - The caching mode for the disk is read only.
	//  readWrite - The caching mode for the disk is read and write.
	//  The default value for caching is none. For information about the caching options see: https://blogs.msdn.microsoft.com/windowsazurestorage/2012/06/27/exploring-windows-azure-drives-disks-and-images/. Possible values include: 'None', 'ReadOnly', 'ReadWrite'
	Caching    CachingType `json:"caching,omitempty"`
	DiskSizeGB *int32      `json:"diskSizeGB,omitempty"`
	// StorageAccountType - If omitted, the default is "Standard_LRS". Values are:
	//  Standard_LRS - The data disk should use standard locally redundant storage.
	//  Premium_LRS - The data disk should use premium locally redundant storage. Possible values include: 'StandardLRS', 'PremiumLRS'
	StorageAccountType StorageAccountType `json:"storageAccountType,omitempty"`
}

// DeleteCertificateError an error response from the Batch service.
type DeleteCertificateError struct {
	// Code - An identifier for the error. Codes are invariant and are intended to be consumed programmatically.
	Code *string `json:"code,omitempty"`
	// Message - A message describing the error, intended to be suitable for display in a user interface.
	Message *string `json:"message,omitempty"`
	// Target - The target of the particular error. For example, the name of the property in error.
	Target *string `json:"target,omitempty"`
	// Details - A list of additional details about the error.
	Details *[]DeleteCertificateError `json:"details,omitempty"`
}

// DeploymentConfiguration ...
type DeploymentConfiguration struct {
	// CloudServiceConfiguration - This property and virtualMachineConfiguration are mutually exclusive and one of the properties must be specified. This property cannot be specified if the Batch account was created with its poolAllocationMode property set to 'UserSubscription'.
	CloudServiceConfiguration *CloudServiceConfiguration `json:"cloudServiceConfiguration,omitempty"`
	// VirtualMachineConfiguration - This property and cloudServiceConfiguration are mutually exclusive and one of the properties must be specified.
	VirtualMachineConfiguration *VirtualMachineConfiguration `json:"virtualMachineConfiguration,omitempty"`
}

// EnvironmentSetting ...
type EnvironmentSetting struct {
	Name  *string `json:"name,omitempty"`
	Value *string `json:"value,omitempty"`
}

// FixedScaleSettings ...
type FixedScaleSettings struct {
	// ResizeTimeout - The default value is 15 minutes. Timeout values use ISO 8601 format. For example, use PT10M for 10 minutes. The minimum value is 5 minutes. If you specify a value less than 5 minutes, the Batch service rejects the request with an error; if you are calling the REST API directly, the HTTP status code is 400 (Bad Request).
	ResizeTimeout *string `json:"resizeTimeout,omitempty"`
	// TargetDedicatedNodes - At least one of targetDedicatedNodes, targetLowPriority nodes must be set.
	TargetDedicatedNodes *int32 `json:"targetDedicatedNodes,omitempty"`
	// TargetLowPriorityNodes - At least one of targetDedicatedNodes, targetLowPriority nodes must be set.
	TargetLowPriorityNodes *int32 `json:"targetLowPriorityNodes,omitempty"`
	// NodeDeallocationOption - If omitted, the default value is Requeue. Possible values include: 'Requeue', 'Terminate', 'TaskCompletion', 'RetainedData'
	NodeDeallocationOption ComputeNodeDeallocationOption `json:"nodeDeallocationOption,omitempty"`
}

// ImageReference ...
type ImageReference struct {
	// Publisher - For example, Canonical or MicrosoftWindowsServer.
	Publisher *string `json:"publisher,omitempty"`
	// Offer - For example, UbuntuServer or WindowsServer.
	Offer *string `json:"offer,omitempty"`
	// Sku - For example, 14.04.0-LTS or 2012-R2-Datacenter.
	Sku *string `json:"sku,omitempty"`
	// Version - A value of 'latest' can be specified to select the latest version of an image. If omitted, the default is 'latest'.
	Version *string `json:"version,omitempty"`
	// ID - This property is mutually exclusive with other properties. The virtual machine image must be in the same region and subscription as the Azure Batch account. For information about the firewall settings for Batch node agent to communicate with Batch service see https://docs.microsoft.com/en-us/azure/batch/batch-api-basics#virtual-network-vnet-and-firewall-configuration .
	ID *string `json:"id,omitempty"`
}

// InboundNatPool ...
type InboundNatPool struct {
	// Name - The name must be unique within a Batch pool, can contain letters, numbers, underscores, periods, and hyphens. Names must start with a letter or number, must end with a letter, number, or underscore, and cannot exceed 77 characters.  If any invalid values are provided the request fails with HTTP status code 400.
	Name *string `json:"name,omitempty"`
	// Protocol - Possible values include: 'TCP', 'UDP'
	Protocol InboundEndpointProtocol `json:"protocol,omitempty"`
	// BackendPort - This must be unique within a Batch pool. Acceptable values are between 1 and 65535 except for 22, 3389, 29876 and 29877 as these are reserved. If any reserved values are provided the request fails with HTTP status code 400.
	BackendPort *int32 `json:"backendPort,omitempty"`
	// FrontendPortRangeStart - Acceptable values range between 1 and 65534 except ports from 50000 to 55000 which are reserved. All ranges within a pool must be distinct and cannot overlap. If any reserved or overlapping values are provided the request fails with HTTP status code 400.
	FrontendPortRangeStart *int32 `json:"frontendPortRangeStart,omitempty"`
	// FrontendPortRangeEnd - Acceptable values range between 1 and 65534 except ports from 50000 to 55000 which are reserved by the Batch service. All ranges within a pool must be distinct and cannot overlap. If any reserved or overlapping values are provided the request fails with HTTP status code 400.
	FrontendPortRangeEnd *int32 `json:"frontendPortRangeEnd,omitempty"`
	// NetworkSecurityGroupRules - The maximum number of rules that can be specified across all the endpoints on a Batch pool is 25. If no network security group rules are specified, a default rule will be created to allow inbound access to the specified backendPort. If the maximum number of network security group rules is exceeded the request fails with HTTP status code 400.
	NetworkSecurityGroupRules *[]NetworkSecurityGroupRule `json:"networkSecurityGroupRules,omitempty"`
}

// KeyVaultReference identifies the Azure key vault associated with a Batch account.
type KeyVaultReference struct {
	// ID - The resource ID of the Azure key vault associated with the Batch account.
	ID *string `json:"id,omitempty"`
	// URL - The URL of the Azure key vault associated with the Batch account.
	URL *string `json:"url,omitempty"`
}

// LinuxUserConfiguration ...
type LinuxUserConfiguration struct {
	// UID - The uid and gid properties must be specified together or not at all. If not specified the underlying operating system picks the uid.
	UID *int32 `json:"uid,omitempty"`
	// Gid - The uid and gid properties must be specified together or not at all. If not specified the underlying operating system picks the gid.
	Gid *int32 `json:"gid,omitempty"`
	// SSHPrivateKey - The private key must not be password protected. The private key is used to automatically configure asymmetric-key based authentication for SSH between nodes in a Linux pool when the pool's enableInterNodeCommunication property is true (it is ignored if enableInterNodeCommunication is false). It does this by placing the key pair into the user's .ssh directory. If not specified, password-less SSH is not configured between nodes (no modification of the user's .ssh directory is done).
	SSHPrivateKey *string `json:"sshPrivateKey,omitempty"`
}

// ListApplicationPackagesResult the result of performing list application packages.
type ListApplicationPackagesResult struct {
	autorest.Response `json:"-"`
	// Value - The list of application packages.
	Value *[]ApplicationPackage `json:"value,omitempty"`
	// NextLink - The URL to get the next set of results.
	NextLink *string `json:"nextLink,omitempty"`
}

// ListApplicationPackagesResultIterator provides access to a complete listing of ApplicationPackage
// values.
type ListApplicationPackagesResultIterator struct {
	i    int
	page ListApplicationPackagesResultPage
}

// NextWithContext advances to the next value.  If there was an error making
// the request the iterator does not advance and the error is returned.
func (iter *ListApplicationPackagesResultIterator) NextWithContext(ctx context.Context) (err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/ListApplicationPackagesResultIterator.NextWithContext")
		defer func() {
			sc := -1
			if iter.Response().Response.Response != nil {
				sc = iter.Response().Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	iter.i++
	if iter.i < len(iter.page.Values()) {
		return nil
	}
	err = iter.page.NextWithContext(ctx)
	if err != nil {
		iter.i--
		return err
	}
	iter.i = 0
	return nil
}

// Next advances to the next value.  If there was an error making
// the request the iterator does not advance and the error is returned.
// Deprecated: Use NextWithContext() instead.
func (iter *ListApplicationPackagesResultIterator) Next() error {
	return iter.NextWithContext(context.Background())
}

// NotDone returns true if the enumeration should be started or is not yet complete.
func (iter ListApplicationPackagesResultIterator) NotDone() bool {
	return iter.page.NotDone() && iter.i < len(iter.page.Values())
}

// Response returns the raw server response from the last page request.
func (iter ListApplicationPackagesResultIterator) Response() ListApplicationPackagesResult {
	return iter.page.Response()
}

// Value returns the current value or a zero-initialized value if the
// iterator has advanced beyond the end of the collection.
func (iter ListApplicationPackagesResultIterator) Value() ApplicationPackage {
	if !iter.page.NotDone() {
		return ApplicationPackage{}
	}
	return iter.page.Values()[iter.i]
}

// Creates a new instance of the ListApplicationPackagesResultIterator type.
func NewListApplicationPackagesResultIterator(page ListApplicationPackagesResultPage) ListApplicationPackagesResultIterator {
	return ListApplicationPackagesResultIterator{page: page}
}

// IsEmpty returns true if the ListResult contains no values.
func (lapr ListApplicationPackagesResult) IsEmpty() bool {
	return lapr.Value == nil || len(*lapr.Value) == 0
}

// listApplicationPackagesResultPreparer prepares a request to retrieve the next set of results.
// It returns nil if no more results exist.
func (lapr ListApplicationPackagesResult) listApplicationPackagesResultPreparer(ctx context.Context) (*http.Request, error) {
	if lapr.NextLink == nil || len(to.String(lapr.NextLink)) < 1 {
		return nil, nil
	}
	return autorest.Prepare((&http.Request{}).WithContext(ctx),
		autorest.AsJSON(),
		autorest.AsGet(),
		autorest.WithBaseURL(to.String(lapr.NextLink)))
}

// ListApplicationPackagesResultPage contains a page of ApplicationPackage values.
type ListApplicationPackagesResultPage struct {
	fn   func(context.Context, ListApplicationPackagesResult) (ListApplicationPackagesResult, error)
	lapr ListApplicationPackagesResult
}

// NextWithContext advances to the next page of values.  If there was an error making
// the request the page does not advance and the error is returned.
func (page *ListApplicationPackagesResultPage) NextWithContext(ctx context.Context) (err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/ListApplicationPackagesResultPage.NextWithContext")
		defer func() {
			sc := -1
			if page.Response().Response.Response != nil {
				sc = page.Response().Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	next, err := page.fn(ctx, page.lapr)
	if err != nil {
		return err
	}
	page.lapr = next
	return nil
}

// Next advances to the next page of values.  If there was an error making
// the request the page does not advance and the error is returned.
// Deprecated: Use NextWithContext() instead.
func (page *ListApplicationPackagesResultPage) Next() error {
	return page.NextWithContext(context.Background())
}

// NotDone returns true if the page enumeration should be started or is not yet complete.
func (page ListApplicationPackagesResultPage) NotDone() bool {
	return !page.lapr.IsEmpty()
}

// Response returns the raw server response from the last page request.
func (page ListApplicationPackagesResultPage) Response() ListApplicationPackagesResult {
	return page.lapr
}

// Values returns the slice of values for the current page or nil if there are no values.
func (page ListApplicationPackagesResultPage) Values() []ApplicationPackage {
	if page.lapr.IsEmpty() {
		return nil
	}
	return *page.lapr.Value
}

// Creates a new instance of the ListApplicationPackagesResultPage type.
func NewListApplicationPackagesResultPage(getNextPage func(context.Context, ListApplicationPackagesResult) (ListApplicationPackagesResult, error)) ListApplicationPackagesResultPage {
	return ListApplicationPackagesResultPage{fn: getNextPage}
}

// ListApplicationsResult the result of performing list applications.
type ListApplicationsResult struct {
	autorest.Response `json:"-"`
	// Value - The list of applications.
	Value *[]Application `json:"value,omitempty"`
	// NextLink - The URL to get the next set of results.
	NextLink *string `json:"nextLink,omitempty"`
}

// ListApplicationsResultIterator provides access to a complete listing of Application values.
type ListApplicationsResultIterator struct {
	i    int
	page ListApplicationsResultPage
}

// NextWithContext advances to the next value.  If there was an error making
// the request the iterator does not advance and the error is returned.
func (iter *ListApplicationsResultIterator) NextWithContext(ctx context.Context) (err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/ListApplicationsResultIterator.NextWithContext")
		defer func() {
			sc := -1
			if iter.Response().Response.Response != nil {
				sc = iter.Response().Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	iter.i++
	if iter.i < len(iter.page.Values()) {
		return nil
	}
	err = iter.page.NextWithContext(ctx)
	if err != nil {
		iter.i--
		return err
	}
	iter.i = 0
	return nil
}

// Next advances to the next value.  If there was an error making
// the request the iterator does not advance and the error is returned.
// Deprecated: Use NextWithContext() instead.
func (iter *ListApplicationsResultIterator) Next() error {
	return iter.NextWithContext(context.Background())
}

// NotDone returns true if the enumeration should be started or is not yet complete.
func (iter ListApplicationsResultIterator) NotDone() bool {
	return iter.page.NotDone() && iter.i < len(iter.page.Values())
}

// Response returns the raw server response from the last page request.
func (iter ListApplicationsResultIterator) Response() ListApplicationsResult {
	return iter.page.Response()
}

// Value returns the current value or a zero-initialized value if the
// iterator has advanced beyond the end of the collection.
func (iter ListApplicationsResultIterator) Value() Application {
	if !iter.page.NotDone() {
		return Application{}
	}
	return iter.page.Values()[iter.i]
}

// Creates a new instance of the ListApplicationsResultIterator type.
func NewListApplicationsResultIterator(page ListApplicationsResultPage) ListApplicationsResultIterator {
	return ListApplicationsResultIterator{page: page}
}

// IsEmpty returns true if the ListResult contains no values.
func (lar ListApplicationsResult) IsEmpty() bool {
	return lar.Value == nil || len(*lar.Value) == 0
}

// listApplicationsResultPreparer prepares a request to retrieve the next set of results.
// It returns nil if no more results exist.
func (lar ListApplicationsResult) listApplicationsResultPreparer(ctx context.Context) (*http.Request, error) {
	if lar.NextLink == nil || len(to.String(lar.NextLink)) < 1 {
		return nil, nil
	}
	return autorest.Prepare((&http.Request{}).WithContext(ctx),
		autorest.AsJSON(),
		autorest.AsGet(),
		autorest.WithBaseURL(to.String(lar.NextLink)))
}

// ListApplicationsResultPage contains a page of Application values.
type ListApplicationsResultPage struct {
	fn  func(context.Context, ListApplicationsResult) (ListApplicationsResult, error)
	lar ListApplicationsResult
}

// NextWithContext advances to the next page of values.  If there was an error making
// the request the page does not advance and the error is returned.
func (page *ListApplicationsResultPage) NextWithContext(ctx context.Context) (err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/ListApplicationsResultPage.NextWithContext")
		defer func() {
			sc := -1
			if page.Response().Response.Response != nil {
				sc = page.Response().Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	next, err := page.fn(ctx, page.lar)
	if err != nil {
		return err
	}
	page.lar = next
	return nil
}

// Next advances to the next page of values.  If there was an error making
// the request the page does not advance and the error is returned.
// Deprecated: Use NextWithContext() instead.
func (page *ListApplicationsResultPage) Next() error {
	return page.NextWithContext(context.Background())
}

// NotDone returns true if the page enumeration should be started or is not yet complete.
func (page ListApplicationsResultPage) NotDone() bool {
	return !page.lar.IsEmpty()
}

// Response returns the raw server response from the last page request.
func (page ListApplicationsResultPage) Response() ListApplicationsResult {
	return page.lar
}

// Values returns the slice of values for the current page or nil if there are no values.
func (page ListApplicationsResultPage) Values() []Application {
	if page.lar.IsEmpty() {
		return nil
	}
	return *page.lar.Value
}

// Creates a new instance of the ListApplicationsResultPage type.
func NewListApplicationsResultPage(getNextPage func(context.Context, ListApplicationsResult) (ListApplicationsResult, error)) ListApplicationsResultPage {
	return ListApplicationsResultPage{fn: getNextPage}
}

// ListCertificatesResult values returned by the List operation.
type ListCertificatesResult struct {
	autorest.Response `json:"-"`
	// Value - The collection of returned certificates.
	Value *[]Certificate `json:"value,omitempty"`
	// NextLink - The continuation token.
	NextLink *string `json:"nextLink,omitempty"`
}

// ListCertificatesResultIterator provides access to a complete listing of Certificate values.
type ListCertificatesResultIterator struct {
	i    int
	page ListCertificatesResultPage
}

// NextWithContext advances to the next value.  If there was an error making
// the request the iterator does not advance and the error is returned.
func (iter *ListCertificatesResultIterator) NextWithContext(ctx context.Context) (err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/ListCertificatesResultIterator.NextWithContext")
		defer func() {
			sc := -1
			if iter.Response().Response.Response != nil {
				sc = iter.Response().Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	iter.i++
	if iter.i < len(iter.page.Values()) {
		return nil
	}
	err = iter.page.NextWithContext(ctx)
	if err != nil {
		iter.i--
		return err
	}
	iter.i = 0
	return nil
}

// Next advances to the next value.  If there was an error making
// the request the iterator does not advance and the error is returned.
// Deprecated: Use NextWithContext() instead.
func (iter *ListCertificatesResultIterator) Next() error {
	return iter.NextWithContext(context.Background())
}

// NotDone returns true if the enumeration should be started or is not yet complete.
func (iter ListCertificatesResultIterator) NotDone() bool {
	return iter.page.NotDone() && iter.i < len(iter.page.Values())
}

// Response returns the raw server response from the last page request.
func (iter ListCertificatesResultIterator) Response() ListCertificatesResult {
	return iter.page.Response()
}

// Value returns the current value or a zero-initialized value if the
// iterator has advanced beyond the end of the collection.
func (iter ListCertificatesResultIterator) Value() Certificate {
	if !iter.page.NotDone() {
		return Certificate{}
	}
	return iter.page.Values()[iter.i]
}

// Creates a new instance of the ListCertificatesResultIterator type.
func NewListCertificatesResultIterator(page ListCertificatesResultPage) ListCertificatesResultIterator {
	return ListCertificatesResultIterator{page: page}
}

// IsEmpty returns true if the ListResult contains no values.
func (lcr ListCertificatesResult) IsEmpty() bool {
	return lcr.Value == nil || len(*lcr.Value) == 0
}

// listCertificatesResultPreparer prepares a request to retrieve the next set of results.
// It returns nil if no more results exist.
func (lcr ListCertificatesResult) listCertificatesResultPreparer(ctx context.Context) (*http.Request, error) {
	if lcr.NextLink == nil || len(to.String(lcr.NextLink)) < 1 {
		return nil, nil
	}
	return autorest.Prepare((&http.Request{}).WithContext(ctx),
		autorest.AsJSON(),
		autorest.AsGet(),
		autorest.WithBaseURL(to.String(lcr.NextLink)))
}

// ListCertificatesResultPage contains a page of Certificate values.
type ListCertificatesResultPage struct {
	fn  func(context.Context, ListCertificatesResult) (ListCertificatesResult, error)
	lcr ListCertificatesResult
}

// NextWithContext advances to the next page of values.  If there was an error making
// the request the page does not advance and the error is returned.
func (page *ListCertificatesResultPage) NextWithContext(ctx context.Context) (err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/ListCertificatesResultPage.NextWithContext")
		defer func() {
			sc := -1
			if page.Response().Response.Response != nil {
				sc = page.Response().Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	next, err := page.fn(ctx, page.lcr)
	if err != nil {
		return err
	}
	page.lcr = next
	return nil
}

// Next advances to the next page of values.  If there was an error making
// the request the page does not advance and the error is returned.
// Deprecated: Use NextWithContext() instead.
func (page *ListCertificatesResultPage) Next() error {
	return page.NextWithContext(context.Background())
}

// NotDone returns true if the page enumeration should be started or is not yet complete.
func (page ListCertificatesResultPage) NotDone() bool {
	return !page.lcr.IsEmpty()
}

// Response returns the raw server response from the last page request.
func (page ListCertificatesResultPage) Response() ListCertificatesResult {
	return page.lcr
}

// Values returns the slice of values for the current page or nil if there are no values.
func (page ListCertificatesResultPage) Values() []Certificate {
	if page.lcr.IsEmpty() {
		return nil
	}
	return *page.lcr.Value
}

// Creates a new instance of the ListCertificatesResultPage type.
func NewListCertificatesResultPage(getNextPage func(context.Context, ListCertificatesResult) (ListCertificatesResult, error)) ListCertificatesResultPage {
	return ListCertificatesResultPage{fn: getNextPage}
}

// ListPoolsResult values returned by the List operation.
type ListPoolsResult struct {
	autorest.Response `json:"-"`
	// Value - The collection of returned pools.
	Value *[]Pool `json:"value,omitempty"`
	// NextLink - The continuation token.
	NextLink *string `json:"nextLink,omitempty"`
}

// ListPoolsResultIterator provides access to a complete listing of Pool values.
type ListPoolsResultIterator struct {
	i    int
	page ListPoolsResultPage
}

// NextWithContext advances to the next value.  If there was an error making
// the request the iterator does not advance and the error is returned.
func (iter *ListPoolsResultIterator) NextWithContext(ctx context.Context) (err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/ListPoolsResultIterator.NextWithContext")
		defer func() {
			sc := -1
			if iter.Response().Response.Response != nil {
				sc = iter.Response().Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	iter.i++
	if iter.i < len(iter.page.Values()) {
		return nil
	}
	err = iter.page.NextWithContext(ctx)
	if err != nil {
		iter.i--
		return err
	}
	iter.i = 0
	return nil
}

// Next advances to the next value.  If there was an error making
// the request the iterator does not advance and the error is returned.
// Deprecated: Use NextWithContext() instead.
func (iter *ListPoolsResultIterator) Next() error {
	return iter.NextWithContext(context.Background())
}

// NotDone returns true if the enumeration should be started or is not yet complete.
func (iter ListPoolsResultIterator) NotDone() bool {
	return iter.page.NotDone() && iter.i < len(iter.page.Values())
}

// Response returns the raw server response from the last page request.
func (iter ListPoolsResultIterator) Response() ListPoolsResult {
	return iter.page.Response()
}

// Value returns the current value or a zero-initialized value if the
// iterator has advanced beyond the end of the collection.
func (iter ListPoolsResultIterator) Value() Pool {
	if !iter.page.NotDone() {
		return Pool{}
	}
	return iter.page.Values()[iter.i]
}

// Creates a new instance of the ListPoolsResultIterator type.
func NewListPoolsResultIterator(page ListPoolsResultPage) ListPoolsResultIterator {
	return ListPoolsResultIterator{page: page}
}

// IsEmpty returns true if the ListResult contains no values.
func (lpr ListPoolsResult) IsEmpty() bool {
	return lpr.Value == nil || len(*lpr.Value) == 0
}

// listPoolsResultPreparer prepares a request to retrieve the next set of results.
// It returns nil if no more results exist.
func (lpr ListPoolsResult) listPoolsResultPreparer(ctx context.Context) (*http.Request, error) {
	if lpr.NextLink == nil || len(to.String(lpr.NextLink)) < 1 {
		return nil, nil
	}
	return autorest.Prepare((&http.Request{}).WithContext(ctx),
		autorest.AsJSON(),
		autorest.AsGet(),
		autorest.WithBaseURL(to.String(lpr.NextLink)))
}

// ListPoolsResultPage contains a page of Pool values.
type ListPoolsResultPage struct {
	fn  func(context.Context, ListPoolsResult) (ListPoolsResult, error)
	lpr ListPoolsResult
}

// NextWithContext advances to the next page of values.  If there was an error making
// the request the page does not advance and the error is returned.
func (page *ListPoolsResultPage) NextWithContext(ctx context.Context) (err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/ListPoolsResultPage.NextWithContext")
		defer func() {
			sc := -1
			if page.Response().Response.Response != nil {
				sc = page.Response().Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	next, err := page.fn(ctx, page.lpr)
	if err != nil {
		return err
	}
	page.lpr = next
	return nil
}

// Next advances to the next page of values.  If there was an error making
// the request the page does not advance and the error is returned.
// Deprecated: Use NextWithContext() instead.
func (page *ListPoolsResultPage) Next() error {
	return page.NextWithContext(context.Background())
}

// NotDone returns true if the page enumeration should be started or is not yet complete.
func (page ListPoolsResultPage) NotDone() bool {
	return !page.lpr.IsEmpty()
}

// Response returns the raw server response from the last page request.
func (page ListPoolsResultPage) Response() ListPoolsResult {
	return page.lpr
}

// Values returns the slice of values for the current page or nil if there are no values.
func (page ListPoolsResultPage) Values() []Pool {
	if page.lpr.IsEmpty() {
		return nil
	}
	return *page.lpr.Value
}

// Creates a new instance of the ListPoolsResultPage type.
func NewListPoolsResultPage(getNextPage func(context.Context, ListPoolsResult) (ListPoolsResult, error)) ListPoolsResultPage {
	return ListPoolsResultPage{fn: getNextPage}
}

// LocationQuota quotas associated with a Batch region for a particular subscription.
type LocationQuota struct {
	autorest.Response `json:"-"`
	// AccountQuota - READ-ONLY; The number of Batch accounts that may be created under the subscription in the specified region.
	AccountQuota *int32 `json:"accountQuota,omitempty"`
}

// MetadataItem the Batch service does not assign any meaning to this metadata; it is solely for the use of
// user code.
type MetadataItem struct {
	Name  *string `json:"name,omitempty"`
	Value *string `json:"value,omitempty"`
}

// NetworkConfiguration the network configuration for a pool.
type NetworkConfiguration struct {
	// SubnetID - The virtual network must be in the same region and subscription as the Azure Batch account. The specified subnet should have enough free IP addresses to accommodate the number of nodes in the pool. If the subnet doesn't have enough free IP addresses, the pool will partially allocate compute nodes, and a resize error will occur. The 'MicrosoftAzureBatch' service principal must have the 'Classic Virtual Machine Contributor' Role-Based Access Control (RBAC) role for the specified VNet. The specified subnet must allow communication from the Azure Batch service to be able to schedule tasks on the compute nodes. This can be verified by checking if the specified VNet has any associated Network Security Groups (NSG). If communication to the compute nodes in the specified subnet is denied by an NSG, then the Batch service will set the state of the compute nodes to unusable. For pools created via virtualMachineConfiguration the Batch account must have poolAllocationMode userSubscription in order to use a VNet. If the specified VNet has any associated Network Security Groups (NSG), then a few reserved system ports must be enabled for inbound communication. For pools created with a virtual machine configuration, enable ports 29876 and 29877, as well as port 22 for Linux and port 3389 for Windows. For pools created with a cloud service configuration, enable ports 10100, 20100, and 30100. Also enable outbound connections to Azure Storage on port 443. For more details see: https://docs.microsoft.com/en-us/azure/batch/batch-api-basics#virtual-network-vnet-and-firewall-configuration
	SubnetID *string `json:"subnetId,omitempty"`
	// EndpointConfiguration - Pool endpoint configuration is only supported on pools with the virtualMachineConfiguration property.
	EndpointConfiguration *PoolEndpointConfiguration `json:"endpointConfiguration,omitempty"`
}

// NetworkSecurityGroupRule ...
type NetworkSecurityGroupRule struct {
	// Priority - Priorities within a pool must be unique and are evaluated in order of priority. The lower the number the higher the priority. For example, rules could be specified with order numbers of 150, 250, and 350. The rule with the order number of 150 takes precedence over the rule that has an order of 250. Allowed priorities are 150 to 3500. If any reserved or duplicate values are provided the request fails with HTTP status code 400.
	Priority *int32 `json:"priority,omitempty"`
	// Access - Possible values include: 'Allow', 'Deny'
	Access NetworkSecurityGroupRuleAccess `json:"access,omitempty"`
	// SourceAddressPrefix - Valid values are a single IP address (i.e. 10.10.10.10), IP subnet (i.e. 192.168.1.0/24), default tag, or * (for all addresses).  If any other values are provided the request fails with HTTP status code 400.
	SourceAddressPrefix *string `json:"sourceAddressPrefix,omitempty"`
}

// Operation ...
type Operation struct {
	// Name - This is of the format {provider}/{resource}/{operation}
	Name       *string           `json:"name,omitempty"`
	Display    *OperationDisplay `json:"display,omitempty"`
	Origin     *string           `json:"origin,omitempty"`
	Properties interface{}       `json:"properties,omitempty"`
}

// OperationDisplay ...
type OperationDisplay struct {
	Provider *string `json:"provider,omitempty"`
	// Operation - For example: read, write, delete, or listKeys/action
	Operation   *string `json:"operation,omitempty"`
	Resource    *string `json:"resource,omitempty"`
	Description *string `json:"description,omitempty"`
}

// OperationListResult ...
type OperationListResult struct {
	autorest.Response `json:"-"`
	Value             *[]Operation `json:"value,omitempty"`
	NextLink          *string      `json:"nextLink,omitempty"`
}

// OperationListResultIterator provides access to a complete listing of Operation values.
type OperationListResultIterator struct {
	i    int
	page OperationListResultPage
}

// NextWithContext advances to the next value.  If there was an error making
// the request the iterator does not advance and the error is returned.
func (iter *OperationListResultIterator) NextWithContext(ctx context.Context) (err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/OperationListResultIterator.NextWithContext")
		defer func() {
			sc := -1
			if iter.Response().Response.Response != nil {
				sc = iter.Response().Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	iter.i++
	if iter.i < len(iter.page.Values()) {
		return nil
	}
	err = iter.page.NextWithContext(ctx)
	if err != nil {
		iter.i--
		return err
	}
	iter.i = 0
	return nil
}

// Next advances to the next value.  If there was an error making
// the request the iterator does not advance and the error is returned.
// Deprecated: Use NextWithContext() instead.
func (iter *OperationListResultIterator) Next() error {
	return iter.NextWithContext(context.Background())
}

// NotDone returns true if the enumeration should be started or is not yet complete.
func (iter OperationListResultIterator) NotDone() bool {
	return iter.page.NotDone() && iter.i < len(iter.page.Values())
}

// Response returns the raw server response from the last page request.
func (iter OperationListResultIterator) Response() OperationListResult {
	return iter.page.Response()
}

// Value returns the current value or a zero-initialized value if the
// iterator has advanced beyond the end of the collection.
func (iter OperationListResultIterator) Value() Operation {
	if !iter.page.NotDone() {
		return Operation{}
	}
	return iter.page.Values()[iter.i]
}

// Creates a new instance of the OperationListResultIterator type.
func NewOperationListResultIterator(page OperationListResultPage) OperationListResultIterator {
	return OperationListResultIterator{page: page}
}

// IsEmpty returns true if the ListResult contains no values.
func (olr OperationListResult) IsEmpty() bool {
	return olr.Value == nil || len(*olr.Value) == 0
}

// operationListResultPreparer prepares a request to retrieve the next set of results.
// It returns nil if no more results exist.
func (olr OperationListResult) operationListResultPreparer(ctx context.Context) (*http.Request, error) {
	if olr.NextLink == nil || len(to.String(olr.NextLink)) < 1 {
		return nil, nil
	}
	return autorest.Prepare((&http.Request{}).WithContext(ctx),
		autorest.AsJSON(),
		autorest.AsGet(),
		autorest.WithBaseURL(to.String(olr.NextLink)))
}

// OperationListResultPage contains a page of Operation values.
type OperationListResultPage struct {
	fn  func(context.Context, OperationListResult) (OperationListResult, error)
	olr OperationListResult
}

// NextWithContext advances to the next page of values.  If there was an error making
// the request the page does not advance and the error is returned.
func (page *OperationListResultPage) NextWithContext(ctx context.Context) (err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/OperationListResultPage.NextWithContext")
		defer func() {
			sc := -1
			if page.Response().Response.Response != nil {
				sc = page.Response().Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	next, err := page.fn(ctx, page.olr)
	if err != nil {
		return err
	}
	page.olr = next
	return nil
}

// Next advances to the next page of values.  If there was an error making
// the request the page does not advance and the error is returned.
// Deprecated: Use NextWithContext() instead.
func (page *OperationListResultPage) Next() error {
	return page.NextWithContext(context.Background())
}

// NotDone returns true if the page enumeration should be started or is not yet complete.
func (page OperationListResultPage) NotDone() bool {
	return !page.olr.IsEmpty()
}

// Response returns the raw server response from the last page request.
func (page OperationListResultPage) Response() OperationListResult {
	return page.olr
}

// Values returns the slice of values for the current page or nil if there are no values.
func (page OperationListResultPage) Values() []Operation {
	if page.olr.IsEmpty() {
		return nil
	}
	return *page.olr.Value
}

// Creates a new instance of the OperationListResultPage type.
func NewOperationListResultPage(getNextPage func(context.Context, OperationListResult) (OperationListResult, error)) OperationListResultPage {
	return OperationListResultPage{fn: getNextPage}
}

// Pool contains information about a pool.
type Pool struct {
	autorest.Response `json:"-"`
	// PoolProperties - The properties associated with the pool.
	*PoolProperties `json:"properties,omitempty"`
	// ID - READ-ONLY; The ID of the resource.
	ID *string `json:"id,omitempty"`
	// Name - READ-ONLY; The name of the resource.
	Name *string `json:"name,omitempty"`
	// Type - READ-ONLY; The type of the resource.
	Type *string `json:"type,omitempty"`
	// Etag - READ-ONLY; The ETag of the resource, used for concurrency statements.
	Etag *string `json:"etag,omitempty"`
}

// MarshalJSON is the custom marshaler for Pool.
func (p Pool) MarshalJSON() ([]byte, error) {
	objectMap := make(map[string]interface{})
	if p.PoolProperties != nil {
		objectMap["properties"] = p.PoolProperties
	}
	return json.Marshal(objectMap)
}

// UnmarshalJSON is the custom unmarshaler for Pool struct.
func (p *Pool) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	for k, v := range m {
		switch k {
		case "properties":
			if v != nil {
				var poolProperties PoolProperties
				err = json.Unmarshal(*v, &poolProperties)
				if err != nil {
					return err
				}
				p.PoolProperties = &poolProperties
			}
		case "id":
			if v != nil {
				var ID string
				err = json.Unmarshal(*v, &ID)
				if err != nil {
					return err
				}
				p.ID = &ID
			}
		case "name":
			if v != nil {
				var name string
				err = json.Unmarshal(*v, &name)
				if err != nil {
					return err
				}
				p.Name = &name
			}
		case "type":
			if v != nil {
				var typeVar string
				err = json.Unmarshal(*v, &typeVar)
				if err != nil {
					return err
				}
				p.Type = &typeVar
			}
		case "etag":
			if v != nil {
				var etag string
				err = json.Unmarshal(*v, &etag)
				if err != nil {
					return err
				}
				p.Etag = &etag
			}
		}
	}

	return nil
}

// PoolCreateFuture an abstraction for monitoring and retrieving the results of a long-running operation.
type PoolCreateFuture struct {
	azure.Future
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future *PoolCreateFuture) Result(client PoolClient) (p Pool, err error) {
	var done bool
	done, err = future.DoneWithContext(context.Background(), client)
	if err != nil {
		err = autorest.NewErrorWithError(err, "batch.PoolCreateFuture", "Result", future.Response(), "Polling failure")
		return
	}
	if !done {
		err = azure.NewAsyncOpIncompleteError("batch.PoolCreateFuture")
		return
	}
	sender := autorest.DecorateSender(client, autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if p.Response.Response, err = future.GetResult(sender); err == nil && p.Response.Response.StatusCode != http.StatusNoContent {
		p, err = client.CreateResponder(p.Response.Response)
		if err != nil {
			err = autorest.NewErrorWithError(err, "batch.PoolCreateFuture", "Result", p.Response.Response, "Failure responding to request")
		}
	}
	return
}

// PoolDeleteFuture an abstraction for monitoring and retrieving the results of a long-running operation.
type PoolDeleteFuture struct {
	azure.Future
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future *PoolDeleteFuture) Result(client PoolClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.DoneWithContext(context.Background(), client)
	if err != nil {
		err = autorest.NewErrorWithError(err, "batch.PoolDeleteFuture", "Result", future.Response(), "Polling failure")
		return
	}
	if !done {
		err = azure.NewAsyncOpIncompleteError("batch.PoolDeleteFuture")
		return
	}
	ar.Response = future.Response()
	return
}

// PoolEndpointConfiguration ...
type PoolEndpointConfiguration struct {
	// InboundNatPools - The maximum number of inbound NAT pools per Batch pool is 5. If the maximum number of inbound NAT pools is exceeded the request fails with HTTP status code 400.
	InboundNatPools *[]InboundNatPool `json:"inboundNatPools,omitempty"`
}

// PoolProperties pool properties.
type PoolProperties struct {
	// DisplayName - The display name need not be unique and can contain any Unicode characters up to a maximum length of 1024.
	DisplayName *string `json:"displayName,omitempty"`
	// LastModified - READ-ONLY; This is the last time at which the pool level data, such as the targetDedicatedNodes or autoScaleSettings, changed. It does not factor in node-level changes such as a compute node changing state.
	LastModified *date.Time `json:"lastModified,omitempty"`
	// CreationTime - READ-ONLY
	CreationTime *date.Time `json:"creationTime,omitempty"`
	// ProvisioningState - READ-ONLY; Possible values include: 'PoolProvisioningStateSucceeded', 'PoolProvisioningStateDeleting'
	ProvisioningState PoolProvisioningState `json:"provisioningState,omitempty"`
	// ProvisioningStateTransitionTime - READ-ONLY
	ProvisioningStateTransitionTime *date.Time `json:"provisioningStateTransitionTime,omitempty"`
	// AllocationState - READ-ONLY; Possible values include: 'Steady', 'Resizing', 'Stopping'
	AllocationState AllocationState `json:"allocationState,omitempty"`
	// AllocationStateTransitionTime - READ-ONLY
	AllocationStateTransitionTime *date.Time `json:"allocationStateTransitionTime,omitempty"`
	// VMSize - For information about available sizes of virtual machines for Cloud Services pools (pools created with cloudServiceConfiguration), see Sizes for Cloud Services (http://azure.microsoft.com/documentation/articles/cloud-services-sizes-specs/). Batch supports all Cloud Services VM sizes except ExtraSmall. For information about available VM sizes for pools using images from the Virtual Machines Marketplace (pools created with virtualMachineConfiguration) see Sizes for Virtual Machines (Linux) (https://azure.microsoft.com/documentation/articles/virtual-machines-linux-sizes/) or Sizes for Virtual Machines (Windows) (https://azure.microsoft.com/documentation/articles/virtual-machines-windows-sizes/). Batch supports all Azure VM sizes except STANDARD_A0 and those with premium storage (STANDARD_GS, STANDARD_DS, and STANDARD_DSV2 series).
	VMSize *string `json:"vmSize,omitempty"`
	// DeploymentConfiguration - Using CloudServiceConfiguration specifies that the nodes should be creating using Azure Cloud Services (PaaS), while VirtualMachineConfiguration uses Azure Virtual Machines (IaaS).
	DeploymentConfiguration *DeploymentConfiguration `json:"deploymentConfiguration,omitempty"`
	// CurrentDedicatedNodes - READ-ONLY
	CurrentDedicatedNodes *int32 `json:"currentDedicatedNodes,omitempty"`
	// CurrentLowPriorityNodes - READ-ONLY
	CurrentLowPriorityNodes *int32         `json:"currentLowPriorityNodes,omitempty"`
	ScaleSettings           *ScaleSettings `json:"scaleSettings,omitempty"`
	// AutoScaleRun - READ-ONLY; This property is set only if the pool automatically scales, i.e. autoScaleSettings are used.
	AutoScaleRun *AutoScaleRun `json:"autoScaleRun,omitempty"`
	// InterNodeCommunication - This imposes restrictions on which nodes can be assigned to the pool. Enabling this value can reduce the chance of the requested number of nodes to be allocated in the pool. If not specified, this value defaults to 'Disabled'. Possible values include: 'Enabled', 'Disabled'
	InterNodeCommunication InterNodeCommunicationState `json:"interNodeCommunication,omitempty"`
	NetworkConfiguration   *NetworkConfiguration       `json:"networkConfiguration,omitempty"`
	// MaxTasksPerNode - The default value is 1. The maximum value is the smaller of 4 times the number of cores of the vmSize of the pool or 256.
	MaxTasksPerNode *int32 `json:"maxTasksPerNode,omitempty"`
	// TaskSchedulingPolicy - If not specified, the default is spread.
	TaskSchedulingPolicy *TaskSchedulingPolicy `json:"taskSchedulingPolicy,omitempty"`
	UserAccounts         *[]UserAccount        `json:"userAccounts,omitempty"`
	// Metadata - The Batch service does not assign any meaning to metadata; it is solely for the use of user code.
	Metadata *[]MetadataItem `json:"metadata,omitempty"`
	// StartTask - In an PATCH (update) operation, this property can be set to an empty object to remove the start task from the pool.
	StartTask *StartTask `json:"startTask,omitempty"`
	// Certificates - For Windows compute nodes, the Batch service installs the certificates to the specified certificate store and location. For Linux compute nodes, the certificates are stored in a directory inside the task working directory and an environment variable AZ_BATCH_CERTIFICATES_DIR is supplied to the task to query for this location. For certificates with visibility of 'remoteUser', a 'certs' directory is created in the user's home directory (e.g., /home/{user-name}/certs) and certificates are placed in that directory.
	Certificates *[]CertificateReference `json:"certificates,omitempty"`
	// ApplicationPackages - Changes to application package references affect all new compute nodes joining the pool, but do not affect compute nodes that are already in the pool until they are rebooted or reimaged. There is a maximum of 10 application package references on any given pool.
	ApplicationPackages *[]ApplicationPackageReference `json:"applicationPackages,omitempty"`
	// ApplicationLicenses - The list of application licenses must be a subset of available Batch service application licenses. If a license is requested which is not supported, pool creation will fail.
	ApplicationLicenses *[]string `json:"applicationLicenses,omitempty"`
	// ResizeOperationStatus - READ-ONLY
	ResizeOperationStatus *ResizeOperationStatus `json:"resizeOperationStatus,omitempty"`
}

// ProxyResource a definition of an Azure resource.
type ProxyResource struct {
	// ID - READ-ONLY; The ID of the resource.
	ID *string `json:"id,omitempty"`
	// Name - READ-ONLY; The name of the resource.
	Name *string `json:"name,omitempty"`
	// Type - READ-ONLY; The type of the resource.
	Type *string `json:"type,omitempty"`
	// Etag - READ-ONLY; The ETag of the resource, used for concurrency statements.
	Etag *string `json:"etag,omitempty"`
}

// ResizeError ...
type ResizeError struct {
	// Code - An identifier for the error. Codes are invariant and are intended to be consumed programmatically.
	Code *string `json:"code,omitempty"`
	// Message - A message describing the error, intended to be suitable for display in a user interface.
	Message *string        `json:"message,omitempty"`
	Details *[]ResizeError `json:"details,omitempty"`
}

// ResizeOperationStatus describes either the current operation (if the pool AllocationState is Resizing)
// or the previously completed operation (if the AllocationState is Steady).
type ResizeOperationStatus struct {
	TargetDedicatedNodes   *int32 `json:"targetDedicatedNodes,omitempty"`
	TargetLowPriorityNodes *int32 `json:"targetLowPriorityNodes,omitempty"`
	// ResizeTimeout - The default value is 15 minutes. The minimum value is 5 minutes. If you specify a value less than 5 minutes, the Batch service returns an error; if you are calling the REST API directly, the HTTP status code is 400 (Bad Request).
	ResizeTimeout *string `json:"resizeTimeout,omitempty"`
	// NodeDeallocationOption - The default value is requeue. Possible values include: 'Requeue', 'Terminate', 'TaskCompletion', 'RetainedData'
	NodeDeallocationOption ComputeNodeDeallocationOption `json:"nodeDeallocationOption,omitempty"`
	StartTime              *date.Time                    `json:"startTime,omitempty"`
	// Errors - This property is set only if an error occurred during the last pool resize, and only when the pool allocationState is Steady.
	Errors *[]ResizeError `json:"errors,omitempty"`
}

// Resource a definition of an Azure resource.
type Resource struct {
	// ID - READ-ONLY; The ID of the resource.
	ID *string `json:"id,omitempty"`
	// Name - READ-ONLY; The name of the resource.
	Name *string `json:"name,omitempty"`
	// Type - READ-ONLY; The type of the resource.
	Type *string `json:"type,omitempty"`
	// Location - READ-ONLY; The location of the resource.
	Location *string `json:"location,omitempty"`
	// Tags - READ-ONLY; The tags of the resource.
	Tags map[string]*string `json:"tags"`
}

// MarshalJSON is the custom marshaler for Resource.
func (r Resource) MarshalJSON() ([]byte, error) {
	objectMap := make(map[string]interface{})
	return json.Marshal(objectMap)
}

// ResourceFile ...
type ResourceFile struct {
	// AutoStorageContainerName - The autoStorageContainerName, storageContainerUrl and httpUrl properties are mutually exclusive and one of them must be specified.
	AutoStorageContainerName *string `json:"autoStorageContainerName,omitempty"`
	// StorageContainerURL - The autoStorageContainerName, storageContainerUrl and httpUrl properties are mutually exclusive and one of them must be specified. This URL must be readable and listable using anonymous access; that is, the Batch service does not present any credentials when downloading the blob. There are two ways to get such a URL for a blob in Azure storage: include a Shared Access Signature (SAS) granting read and list permissions on the blob, or set the ACL for the blob or its container to allow public access.
	StorageContainerURL *string `json:"storageContainerUrl,omitempty"`
	// HTTPURL - The autoStorageContainerName, storageContainerUrl and httpUrl properties are mutually exclusive and one of them must be specified. If the URL is Azure Blob Storage, it must be readable using anonymous access; that is, the Batch service does not present any credentials when downloading the blob. There are two ways to get such a URL for a blob in Azure storage: include a Shared Access Signature (SAS) granting read permissions on the blob, or set the ACL for the blob or its container to allow public access.
	HTTPURL *string `json:"httpUrl,omitempty"`
	// BlobPrefix - The property is valid only when autoStorageContainerName or storageContainerUrl is used. This prefix can be a partial filename or a subdirectory. If a prefix is not specified, all the files in the container will be downloaded.
	BlobPrefix *string `json:"blobPrefix,omitempty"`
	// FilePath - If the httpUrl property is specified, the filePath is required and describes the path which the file will be downloaded to, including the filename. Otherwise, if the autoStorageContainerName or storageContainerUrl property is specified, filePath is optional and is the directory to download the files to. In the case where filePath is used as a directory, any directory structure already associated with the input data will be retained in full and appended to the specified filePath directory. The specified relative path cannot break out of the task's working directory (for example by using '..').
	FilePath *string `json:"filePath,omitempty"`
	// FileMode - This property applies only to files being downloaded to Linux compute nodes. It will be ignored if it is specified for a resourceFile which will be downloaded to a Windows node. If this property is not specified for a Linux node, then a default value of 0770 is applied to the file.
	FileMode *string `json:"fileMode,omitempty"`
}

// ScaleSettings defines the desired size of the pool. This can either be 'fixedScale' where the requested
// targetDedicatedNodes is specified, or 'autoScale' which defines a formula which is periodically
// reevaluated. If this property is not specified, the pool will have a fixed scale with 0
// targetDedicatedNodes.
type ScaleSettings struct {
	// FixedScale - This property and autoScale are mutually exclusive and one of the properties must be specified.
	FixedScale *FixedScaleSettings `json:"fixedScale,omitempty"`
	// AutoScale - This property and fixedScale are mutually exclusive and one of the properties must be specified.
	AutoScale *AutoScaleSettings `json:"autoScale,omitempty"`
}

// StartTask in some cases the start task may be re-run even though the node was not rebooted. Due to this,
// start tasks should be idempotent and exit gracefully if the setup they're performing has already been
// done. Special care should be taken to avoid start tasks which create breakaway process or install/launch
// services from the start task working directory, as this will block Batch from being able to re-run the
// start task.
type StartTask struct {
	// CommandLine - The command line does not run under a shell, and therefore cannot take advantage of shell features such as environment variable expansion. If you want to take advantage of such features, you should invoke the shell in the command line, for example using "cmd /c MyCommand" in Windows or "/bin/sh -c MyCommand" in Linux. Required if any other properties of the startTask are specified.
	CommandLine         *string               `json:"commandLine,omitempty"`
	ResourceFiles       *[]ResourceFile       `json:"resourceFiles,omitempty"`
	EnvironmentSettings *[]EnvironmentSetting `json:"environmentSettings,omitempty"`
	// UserIdentity - If omitted, the task runs as a non-administrative user unique to the task.
	UserIdentity *UserIdentity `json:"userIdentity,omitempty"`
	// MaxTaskRetryCount - The Batch service retries a task if its exit code is nonzero. Note that this value specifically controls the number of retries. The Batch service will try the task once, and may then retry up to this limit. For example, if the maximum retry count is 3, Batch tries the task up to 4 times (one initial try and 3 retries). If the maximum retry count is 0, the Batch service does not retry the task. If the maximum retry count is -1, the Batch service retries the task without limit.
	MaxTaskRetryCount *int32 `json:"maxTaskRetryCount,omitempty"`
	// WaitForSuccess - If true and the start task fails on a compute node, the Batch service retries the start task up to its maximum retry count (maxTaskRetryCount). If the task has still not completed successfully after all retries, then the Batch service marks the compute node unusable, and will not schedule tasks to it. This condition can be detected via the node state and scheduling error detail. If false, the Batch service will not wait for the start task to complete. In this case, other tasks can start executing on the compute node while the start task is still running; and even if the start task fails, new tasks will continue to be scheduled on the node. The default is false.
	WaitForSuccess *bool `json:"waitForSuccess,omitempty"`
	// ContainerSettings - When this is specified, all directories recursively below the AZ_BATCH_NODE_ROOT_DIR (the root of Azure Batch directories on the node) are mapped into the container, all task environment variables are mapped into the container, and the task command line is executed in the container.
	ContainerSettings *TaskContainerSettings `json:"containerSettings,omitempty"`
}

// TaskContainerSettings ...
type TaskContainerSettings struct {
	// ContainerRunOptions - These additional options are supplied as arguments to the "docker create" command, in addition to those controlled by the Batch Service.
	ContainerRunOptions *string `json:"containerRunOptions,omitempty"`
	// ImageName - This is the full image reference, as would be specified to "docker pull". If no tag is provided as part of the image name, the tag ":latest" is used as a default.
	ImageName *string `json:"imageName,omitempty"`
	// Registry - This setting can be omitted if was already provided at pool creation.
	Registry *ContainerRegistry `json:"registry,omitempty"`
}

// TaskSchedulingPolicy ...
type TaskSchedulingPolicy struct {
	// NodeFillType - Possible values include: 'Spread', 'Pack'
	NodeFillType ComputeNodeFillType `json:"nodeFillType,omitempty"`
}

// UserAccount ...
type UserAccount struct {
	Name     *string `json:"name,omitempty"`
	Password *string `json:"password,omitempty"`
	// ElevationLevel - nonAdmin - The auto user is a standard user without elevated access. admin - The auto user is a user with elevated access and operates with full Administrator permissions. The default value is nonAdmin. Possible values include: 'NonAdmin', 'Admin'
	ElevationLevel ElevationLevel `json:"elevationLevel,omitempty"`
	// LinuxUserConfiguration - This property is ignored if specified on a Windows pool. If not specified, the user is created with the default options.
	LinuxUserConfiguration *LinuxUserConfiguration `json:"linuxUserConfiguration,omitempty"`
	// WindowsUserConfiguration - This property can only be specified if the user is on a Windows pool. If not specified and on a Windows pool, the user is created with the default options.
	WindowsUserConfiguration *WindowsUserConfiguration `json:"windowsUserConfiguration,omitempty"`
}

// UserIdentity specify either the userName or autoUser property, but not both.
type UserIdentity struct {
	// UserName - The userName and autoUser properties are mutually exclusive; you must specify one but not both.
	UserName *string `json:"userName,omitempty"`
	// AutoUser - The userName and autoUser properties are mutually exclusive; you must specify one but not both.
	AutoUser *AutoUserSpecification `json:"autoUser,omitempty"`
}

// VirtualMachineConfiguration ...
type VirtualMachineConfiguration struct {
	ImageReference *ImageReference `json:"imageReference,omitempty"`
	// NodeAgentSkuID - The Batch node agent is a program that runs on each node in the pool, and provides the command-and-control interface between the node and the Batch service. There are different implementations of the node agent, known as SKUs, for different operating systems. You must specify a node agent SKU which matches the selected image reference. To get the list of supported node agent SKUs along with their list of verified image references, see the 'List supported node agent SKUs' operation.
	NodeAgentSkuID *string `json:"nodeAgentSkuId,omitempty"`
	// WindowsConfiguration - This property must not be specified if the imageReference specifies a Linux OS image.
	WindowsConfiguration *WindowsConfiguration `json:"windowsConfiguration,omitempty"`
	// DataDisks - This property must be specified if the compute nodes in the pool need to have empty data disks attached to them.
	DataDisks *[]DataDisk `json:"dataDisks,omitempty"`
	// LicenseType - This only applies to images that contain the Windows operating system, and should only be used when you hold valid on-premises licenses for the nodes which will be deployed. If omitted, no on-premises licensing discount is applied. Values are:
	//  Windows_Server - The on-premises license is for Windows Server.
	//  Windows_Client - The on-premises license is for Windows Client.
	LicenseType *string `json:"licenseType,omitempty"`
	// ContainerConfiguration - If specified, setup is performed on each node in the pool to allow tasks to run in containers. All regular tasks and job manager tasks run on this pool must specify the containerSettings property, and all other tasks may specify it.
	ContainerConfiguration *ContainerConfiguration `json:"containerConfiguration,omitempty"`
}

// VirtualMachineFamilyCoreQuota a VM Family and its associated core quota for the Batch account.
type VirtualMachineFamilyCoreQuota struct {
	// Name - READ-ONLY; The Virtual Machine family name.
	Name *string `json:"name,omitempty"`
	// CoreQuota - READ-ONLY; The core quota for the VM family for the Batch account.
	CoreQuota *int32 `json:"coreQuota,omitempty"`
}

// WindowsConfiguration ...
type WindowsConfiguration struct {
	// EnableAutomaticUpdates - If omitted, the default value is true.
	EnableAutomaticUpdates *bool `json:"enableAutomaticUpdates,omitempty"`
}

// WindowsUserConfiguration ...
type WindowsUserConfiguration struct {
	// LoginMode - Specifies login mode for the user. The default value for VirtualMachineConfiguration pools is interactive mode and for CloudServiceConfiguration pools is batch mode. Possible values include: 'Batch', 'Interactive'
	LoginMode LoginMode `json:"loginMode,omitempty"`
}