disasterrecoveryconfigs.go

package servicebus

// Copyright (c) Microsoft and contributors.  All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
//
// See the License for the specific language governing permissions and
// limitations under the License.
//
// Code generated by Microsoft (R) AutoRest Code Generator.
// Changes may cause incorrect behavior and will be lost if the code is regenerated.

import (
	"context"
	"github.com/Azure/go-autorest/autorest"
	"github.com/Azure/go-autorest/autorest/azure"
	"github.com/Azure/go-autorest/autorest/validation"
	"github.com/Azure/go-autorest/tracing"
	"net/http"
)

// DisasterRecoveryConfigsClient is the azure Service Bus client
type DisasterRecoveryConfigsClient struct {
	BaseClient
}

// NewDisasterRecoveryConfigsClient creates an instance of the DisasterRecoveryConfigsClient client.
func NewDisasterRecoveryConfigsClient(subscriptionID string) DisasterRecoveryConfigsClient {
	return NewDisasterRecoveryConfigsClientWithBaseURI(DefaultBaseURI, subscriptionID)
}

// NewDisasterRecoveryConfigsClientWithBaseURI creates an instance of the DisasterRecoveryConfigsClient client using a
// custom endpoint.  Use this when interacting with an Azure cloud that uses a non-standard base URI (sovereign clouds,
// Azure stack).
func NewDisasterRecoveryConfigsClientWithBaseURI(baseURI string, subscriptionID string) DisasterRecoveryConfigsClient {
	return DisasterRecoveryConfigsClient{NewWithBaseURI(baseURI, subscriptionID)}
}

// BreakPairing this operation disables the Disaster Recovery and stops replicating changes from primary to secondary
// namespaces
// Parameters:
// resourceGroupName - name of the Resource group within the Azure subscription.
// namespaceName - the namespace name
// alias - the Disaster Recovery configuration name
func (client DisasterRecoveryConfigsClient) BreakPairing(ctx context.Context, resourceGroupName string, namespaceName string, alias string) (result autorest.Response, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/DisasterRecoveryConfigsClient.BreakPairing")
		defer func() {
			sc := -1
			if result.Response != nil {
				sc = result.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil}}},
		{TargetValue: namespaceName,
			Constraints: []validation.Constraint{{Target: "namespaceName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "namespaceName", Name: validation.MinLength, Rule: 6, Chain: nil}}},
		{TargetValue: alias,
			Constraints: []validation.Constraint{{Target: "alias", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "alias", Name: validation.MinLength, Rule: 1, Chain: nil}}}}); err != nil {
		return result, validation.NewError("servicebus.DisasterRecoveryConfigsClient", "BreakPairing", err.Error())
	}

	req, err := client.BreakPairingPreparer(ctx, resourceGroupName, namespaceName, alias)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "BreakPairing", nil, "Failure preparing request")
		return
	}

	resp, err := client.BreakPairingSender(req)
	if err != nil {
		result.Response = resp
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "BreakPairing", resp, "Failure sending request")
		return
	}

	result, err = client.BreakPairingResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "BreakPairing", resp, "Failure responding to request")
	}

	return
}

// BreakPairingPreparer prepares the BreakPairing request.
func (client DisasterRecoveryConfigsClient) BreakPairingPreparer(ctx context.Context, resourceGroupName string, namespaceName string, alias string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"alias":             autorest.Encode("path", alias),
		"namespaceName":     autorest.Encode("path", namespaceName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2017-04-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ServiceBus/namespaces/{namespaceName}/disasterRecoveryConfigs/{alias}/breakPairing", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// BreakPairingSender sends the BreakPairing request. The method will close the
// http.Response Body if it receives an error.
func (client DisasterRecoveryConfigsClient) BreakPairingSender(req *http.Request) (*http.Response, error) {
	return client.Send(req, azure.DoRetryWithRegistration(client.Client))
}

// BreakPairingResponder handles the response to the BreakPairing request. The method always
// closes the http.Response Body.
func (client DisasterRecoveryConfigsClient) BreakPairingResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByClosing())
	result.Response = resp
	return
}

// CheckNameAvailabilityMethod check the give namespace name availability.
// Parameters:
// resourceGroupName - name of the Resource group within the Azure subscription.
// namespaceName - the namespace name
// parameters - parameters to check availability of the given namespace name
func (client DisasterRecoveryConfigsClient) CheckNameAvailabilityMethod(ctx context.Context, resourceGroupName string, namespaceName string, parameters CheckNameAvailability) (result CheckNameAvailabilityResult, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/DisasterRecoveryConfigsClient.CheckNameAvailabilityMethod")
		defer func() {
			sc := -1
			if result.Response.Response != nil {
				sc = result.Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil}}},
		{TargetValue: namespaceName,
			Constraints: []validation.Constraint{{Target: "namespaceName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "namespaceName", Name: validation.MinLength, Rule: 6, Chain: nil}}},
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.Name", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewError("servicebus.DisasterRecoveryConfigsClient", "CheckNameAvailabilityMethod", err.Error())
	}

	req, err := client.CheckNameAvailabilityMethodPreparer(ctx, resourceGroupName, namespaceName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "CheckNameAvailabilityMethod", nil, "Failure preparing request")
		return
	}

	resp, err := client.CheckNameAvailabilityMethodSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "CheckNameAvailabilityMethod", resp, "Failure sending request")
		return
	}

	result, err = client.CheckNameAvailabilityMethodResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "CheckNameAvailabilityMethod", resp, "Failure responding to request")
	}

	return
}

// CheckNameAvailabilityMethodPreparer prepares the CheckNameAvailabilityMethod request.
func (client DisasterRecoveryConfigsClient) CheckNameAvailabilityMethodPreparer(ctx context.Context, resourceGroupName string, namespaceName string, parameters CheckNameAvailability) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"namespaceName":     autorest.Encode("path", namespaceName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2017-04-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsContentType("application/json; charset=utf-8"),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ServiceBus/namespaces/{namespaceName}/disasterRecoveryConfigs/CheckNameAvailability", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// CheckNameAvailabilityMethodSender sends the CheckNameAvailabilityMethod request. The method will close the
// http.Response Body if it receives an error.
func (client DisasterRecoveryConfigsClient) CheckNameAvailabilityMethodSender(req *http.Request) (*http.Response, error) {
	return client.Send(req, azure.DoRetryWithRegistration(client.Client))
}

// CheckNameAvailabilityMethodResponder handles the response to the CheckNameAvailabilityMethod request. The method always
// closes the http.Response Body.
func (client DisasterRecoveryConfigsClient) CheckNameAvailabilityMethodResponder(resp *http.Response) (result CheckNameAvailabilityResult, err error) {
	err = autorest.Respond(
		resp,
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// CreateOrUpdate creates or updates a new Alias(Disaster Recovery configuration)
// Parameters:
// resourceGroupName - name of the Resource group within the Azure subscription.
// namespaceName - the namespace name
// alias - the Disaster Recovery configuration name
// parameters - parameters required to create an Alias(Disaster Recovery configuration)
func (client DisasterRecoveryConfigsClient) CreateOrUpdate(ctx context.Context, resourceGroupName string, namespaceName string, alias string, parameters ArmDisasterRecovery) (result ArmDisasterRecovery, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/DisasterRecoveryConfigsClient.CreateOrUpdate")
		defer func() {
			sc := -1
			if result.Response.Response != nil {
				sc = result.Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil}}},
		{TargetValue: namespaceName,
			Constraints: []validation.Constraint{{Target: "namespaceName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "namespaceName", Name: validation.MinLength, Rule: 6, Chain: nil}}},
		{TargetValue: alias,
			Constraints: []validation.Constraint{{Target: "alias", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "alias", Name: validation.MinLength, Rule: 1, Chain: nil}}}}); err != nil {
		return result, validation.NewError("servicebus.DisasterRecoveryConfigsClient", "CreateOrUpdate", err.Error())
	}

	req, err := client.CreateOrUpdatePreparer(ctx, resourceGroupName, namespaceName, alias, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "CreateOrUpdate", nil, "Failure preparing request")
		return
	}

	resp, err := client.CreateOrUpdateSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "CreateOrUpdate", resp, "Failure sending request")
		return
	}

	result, err = client.CreateOrUpdateResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "CreateOrUpdate", resp, "Failure responding to request")
	}

	return
}

// CreateOrUpdatePreparer prepares the CreateOrUpdate request.
func (client DisasterRecoveryConfigsClient) CreateOrUpdatePreparer(ctx context.Context, resourceGroupName string, namespaceName string, alias string, parameters ArmDisasterRecovery) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"alias":             autorest.Encode("path", alias),
		"namespaceName":     autorest.Encode("path", namespaceName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2017-04-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsContentType("application/json; charset=utf-8"),
		autorest.AsPut(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ServiceBus/namespaces/{namespaceName}/disasterRecoveryConfigs/{alias}", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// CreateOrUpdateSender sends the CreateOrUpdate request. The method will close the
// http.Response Body if it receives an error.
func (client DisasterRecoveryConfigsClient) CreateOrUpdateSender(req *http.Request) (*http.Response, error) {
	return client.Send(req, azure.DoRetryWithRegistration(client.Client))
}

// CreateOrUpdateResponder handles the response to the CreateOrUpdate request. The method always
// closes the http.Response Body.
func (client DisasterRecoveryConfigsClient) CreateOrUpdateResponder(resp *http.Response) (result ArmDisasterRecovery, err error) {
	err = autorest.Respond(
		resp,
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusCreated),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Delete deletes an Alias(Disaster Recovery configuration)
// Parameters:
// resourceGroupName - name of the Resource group within the Azure subscription.
// namespaceName - the namespace name
// alias - the Disaster Recovery configuration name
func (client DisasterRecoveryConfigsClient) Delete(ctx context.Context, resourceGroupName string, namespaceName string, alias string) (result autorest.Response, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/DisasterRecoveryConfigsClient.Delete")
		defer func() {
			sc := -1
			if result.Response != nil {
				sc = result.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil}}},
		{TargetValue: namespaceName,
			Constraints: []validation.Constraint{{Target: "namespaceName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "namespaceName", Name: validation.MinLength, Rule: 6, Chain: nil}}},
		{TargetValue: alias,
			Constraints: []validation.Constraint{{Target: "alias", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "alias", Name: validation.MinLength, Rule: 1, Chain: nil}}}}); err != nil {
		return result, validation.NewError("servicebus.DisasterRecoveryConfigsClient", "Delete", err.Error())
	}

	req, err := client.DeletePreparer(ctx, resourceGroupName, namespaceName, alias)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "Delete", nil, "Failure preparing request")
		return
	}

	resp, err := client.DeleteSender(req)
	if err != nil {
		result.Response = resp
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "Delete", resp, "Failure sending request")
		return
	}

	result, err = client.DeleteResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "Delete", resp, "Failure responding to request")
	}

	return
}

// DeletePreparer prepares the Delete request.
func (client DisasterRecoveryConfigsClient) DeletePreparer(ctx context.Context, resourceGroupName string, namespaceName string, alias string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"alias":             autorest.Encode("path", alias),
		"namespaceName":     autorest.Encode("path", namespaceName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2017-04-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsDelete(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ServiceBus/namespaces/{namespaceName}/disasterRecoveryConfigs/{alias}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// DeleteSender sends the Delete request. The method will close the
// http.Response Body if it receives an error.
func (client DisasterRecoveryConfigsClient) DeleteSender(req *http.Request) (*http.Response, error) {
	return client.Send(req, azure.DoRetryWithRegistration(client.Client))
}

// DeleteResponder handles the response to the Delete request. The method always
// closes the http.Response Body.
func (client DisasterRecoveryConfigsClient) DeleteResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByClosing())
	result.Response = resp
	return
}

// FailOver invokes GEO DR failover and reconfigure the alias to point to the secondary namespace
// Parameters:
// resourceGroupName - name of the Resource group within the Azure subscription.
// namespaceName - the namespace name
// alias - the Disaster Recovery configuration name
func (client DisasterRecoveryConfigsClient) FailOver(ctx context.Context, resourceGroupName string, namespaceName string, alias string) (result autorest.Response, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/DisasterRecoveryConfigsClient.FailOver")
		defer func() {
			sc := -1
			if result.Response != nil {
				sc = result.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil}}},
		{TargetValue: namespaceName,
			Constraints: []validation.Constraint{{Target: "namespaceName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "namespaceName", Name: validation.MinLength, Rule: 6, Chain: nil}}},
		{TargetValue: alias,
			Constraints: []validation.Constraint{{Target: "alias", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "alias", Name: validation.MinLength, Rule: 1, Chain: nil}}}}); err != nil {
		return result, validation.NewError("servicebus.DisasterRecoveryConfigsClient", "FailOver", err.Error())
	}

	req, err := client.FailOverPreparer(ctx, resourceGroupName, namespaceName, alias)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "FailOver", nil, "Failure preparing request")
		return
	}

	resp, err := client.FailOverSender(req)
	if err != nil {
		result.Response = resp
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "FailOver", resp, "Failure sending request")
		return
	}

	result, err = client.FailOverResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "FailOver", resp, "Failure responding to request")
	}

	return
}

// FailOverPreparer prepares the FailOver request.
func (client DisasterRecoveryConfigsClient) FailOverPreparer(ctx context.Context, resourceGroupName string, namespaceName string, alias string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"alias":             autorest.Encode("path", alias),
		"namespaceName":     autorest.Encode("path", namespaceName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2017-04-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ServiceBus/namespaces/{namespaceName}/disasterRecoveryConfigs/{alias}/failover", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// FailOverSender sends the FailOver request. The method will close the
// http.Response Body if it receives an error.
func (client DisasterRecoveryConfigsClient) FailOverSender(req *http.Request) (*http.Response, error) {
	return client.Send(req, azure.DoRetryWithRegistration(client.Client))
}

// FailOverResponder handles the response to the FailOver request. The method always
// closes the http.Response Body.
func (client DisasterRecoveryConfigsClient) FailOverResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByClosing())
	result.Response = resp
	return
}

// Get retrieves Alias(Disaster Recovery configuration) for primary or secondary namespace
// Parameters:
// resourceGroupName - name of the Resource group within the Azure subscription.
// namespaceName - the namespace name
// alias - the Disaster Recovery configuration name
func (client DisasterRecoveryConfigsClient) Get(ctx context.Context, resourceGroupName string, namespaceName string, alias string) (result ArmDisasterRecovery, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/DisasterRecoveryConfigsClient.Get")
		defer func() {
			sc := -1
			if result.Response.Response != nil {
				sc = result.Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil}}},
		{TargetValue: namespaceName,
			Constraints: []validation.Constraint{{Target: "namespaceName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "namespaceName", Name: validation.MinLength, Rule: 6, Chain: nil}}},
		{TargetValue: alias,
			Constraints: []validation.Constraint{{Target: "alias", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "alias", Name: validation.MinLength, Rule: 1, Chain: nil}}}}); err != nil {
		return result, validation.NewError("servicebus.DisasterRecoveryConfigsClient", "Get", err.Error())
	}

	req, err := client.GetPreparer(ctx, resourceGroupName, namespaceName, alias)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "Get", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "Get", resp, "Failure sending request")
		return
	}

	result, err = client.GetResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "Get", resp, "Failure responding to request")
	}

	return
}

// GetPreparer prepares the Get request.
func (client DisasterRecoveryConfigsClient) GetPreparer(ctx context.Context, resourceGroupName string, namespaceName string, alias string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"alias":             autorest.Encode("path", alias),
		"namespaceName":     autorest.Encode("path", namespaceName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2017-04-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ServiceBus/namespaces/{namespaceName}/disasterRecoveryConfigs/{alias}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetSender sends the Get request. The method will close the
// http.Response Body if it receives an error.
func (client DisasterRecoveryConfigsClient) GetSender(req *http.Request) (*http.Response, error) {
	return client.Send(req, azure.DoRetryWithRegistration(client.Client))
}

// GetResponder handles the response to the Get request. The method always
// closes the http.Response Body.
func (client DisasterRecoveryConfigsClient) GetResponder(resp *http.Response) (result ArmDisasterRecovery, err error) {
	err = autorest.Respond(
		resp,
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// GetAuthorizationRule gets an authorization rule for a namespace by rule name.
// Parameters:
// resourceGroupName - name of the Resource group within the Azure subscription.
// namespaceName - the namespace name
// alias - the Disaster Recovery configuration name
// authorizationRuleName - the authorization rule name.
func (client DisasterRecoveryConfigsClient) GetAuthorizationRule(ctx context.Context, resourceGroupName string, namespaceName string, alias string, authorizationRuleName string) (result SBAuthorizationRule, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/DisasterRecoveryConfigsClient.GetAuthorizationRule")
		defer func() {
			sc := -1
			if result.Response.Response != nil {
				sc = result.Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil}}},
		{TargetValue: namespaceName,
			Constraints: []validation.Constraint{{Target: "namespaceName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "namespaceName", Name: validation.MinLength, Rule: 6, Chain: nil}}},
		{TargetValue: alias,
			Constraints: []validation.Constraint{{Target: "alias", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "alias", Name: validation.MinLength, Rule: 1, Chain: nil}}},
		{TargetValue: authorizationRuleName,
			Constraints: []validation.Constraint{{Target: "authorizationRuleName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "authorizationRuleName", Name: validation.MinLength, Rule: 1, Chain: nil}}}}); err != nil {
		return result, validation.NewError("servicebus.DisasterRecoveryConfigsClient", "GetAuthorizationRule", err.Error())
	}

	req, err := client.GetAuthorizationRulePreparer(ctx, resourceGroupName, namespaceName, alias, authorizationRuleName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "GetAuthorizationRule", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetAuthorizationRuleSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "GetAuthorizationRule", resp, "Failure sending request")
		return
	}

	result, err = client.GetAuthorizationRuleResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "GetAuthorizationRule", resp, "Failure responding to request")
	}

	return
}

// GetAuthorizationRulePreparer prepares the GetAuthorizationRule request.
func (client DisasterRecoveryConfigsClient) GetAuthorizationRulePreparer(ctx context.Context, resourceGroupName string, namespaceName string, alias string, authorizationRuleName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"alias":                 autorest.Encode("path", alias),
		"authorizationRuleName": autorest.Encode("path", authorizationRuleName),
		"namespaceName":         autorest.Encode("path", namespaceName),
		"resourceGroupName":     autorest.Encode("path", resourceGroupName),
		"subscriptionId":        autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2017-04-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ServiceBus/namespaces/{namespaceName}/disasterRecoveryConfigs/{alias}/AuthorizationRules/{authorizationRuleName}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetAuthorizationRuleSender sends the GetAuthorizationRule request. The method will close the
// http.Response Body if it receives an error.
func (client DisasterRecoveryConfigsClient) GetAuthorizationRuleSender(req *http.Request) (*http.Response, error) {
	return client.Send(req, azure.DoRetryWithRegistration(client.Client))
}

// GetAuthorizationRuleResponder handles the response to the GetAuthorizationRule request. The method always
// closes the http.Response Body.
func (client DisasterRecoveryConfigsClient) GetAuthorizationRuleResponder(resp *http.Response) (result SBAuthorizationRule, err error) {
	err = autorest.Respond(
		resp,
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// List gets all Alias(Disaster Recovery configurations)
// Parameters:
// resourceGroupName - name of the Resource group within the Azure subscription.
// namespaceName - the namespace name
func (client DisasterRecoveryConfigsClient) List(ctx context.Context, resourceGroupName string, namespaceName string) (result ArmDisasterRecoveryListResultPage, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/DisasterRecoveryConfigsClient.List")
		defer func() {
			sc := -1
			if result.adrlr.Response.Response != nil {
				sc = result.adrlr.Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil}}},
		{TargetValue: namespaceName,
			Constraints: []validation.Constraint{{Target: "namespaceName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "namespaceName", Name: validation.MinLength, Rule: 6, Chain: nil}}}}); err != nil {
		return result, validation.NewError("servicebus.DisasterRecoveryConfigsClient", "List", err.Error())
	}

	result.fn = client.listNextResults
	req, err := client.ListPreparer(ctx, resourceGroupName, namespaceName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "List", nil, "Failure preparing request")
		return
	}

	resp, err := client.ListSender(req)
	if err != nil {
		result.adrlr.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "List", resp, "Failure sending request")
		return
	}

	result.adrlr, err = client.ListResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "List", resp, "Failure responding to request")
	}
	if result.adrlr.hasNextLink() && result.adrlr.IsEmpty() {
		err = result.NextWithContext(ctx)
	}

	return
}

// ListPreparer prepares the List request.
func (client DisasterRecoveryConfigsClient) ListPreparer(ctx context.Context, resourceGroupName string, namespaceName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"namespaceName":     autorest.Encode("path", namespaceName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2017-04-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ServiceBus/namespaces/{namespaceName}/disasterRecoveryConfigs", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// ListSender sends the List request. The method will close the
// http.Response Body if it receives an error.
func (client DisasterRecoveryConfigsClient) ListSender(req *http.Request) (*http.Response, error) {
	return client.Send(req, azure.DoRetryWithRegistration(client.Client))
}

// ListResponder handles the response to the List request. The method always
// closes the http.Response Body.
func (client DisasterRecoveryConfigsClient) ListResponder(resp *http.Response) (result ArmDisasterRecoveryListResult, err error) {
	err = autorest.Respond(
		resp,
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// listNextResults retrieves the next set of results, if any.
func (client DisasterRecoveryConfigsClient) listNextResults(ctx context.Context, lastResults ArmDisasterRecoveryListResult) (result ArmDisasterRecoveryListResult, err error) {
	req, err := lastResults.armDisasterRecoveryListResultPreparer(ctx)
	if err != nil {
		return result, autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "listNextResults", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}
	resp, err := client.ListSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "listNextResults", resp, "Failure sending next results request")
	}
	result, err = client.ListResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "listNextResults", resp, "Failure responding to next results request")
	}
	return
}

// ListComplete enumerates all values, automatically crossing page boundaries as required.
func (client DisasterRecoveryConfigsClient) ListComplete(ctx context.Context, resourceGroupName string, namespaceName string) (result ArmDisasterRecoveryListResultIterator, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/DisasterRecoveryConfigsClient.List")
		defer func() {
			sc := -1
			if result.Response().Response.Response != nil {
				sc = result.page.Response().Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	result.page, err = client.List(ctx, resourceGroupName, namespaceName)
	return
}

// ListAuthorizationRules gets the authorization rules for a namespace.
// Parameters:
// resourceGroupName - name of the Resource group within the Azure subscription.
// namespaceName - the namespace name
// alias - the Disaster Recovery configuration name
func (client DisasterRecoveryConfigsClient) ListAuthorizationRules(ctx context.Context, resourceGroupName string, namespaceName string, alias string) (result SBAuthorizationRuleListResultPage, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/DisasterRecoveryConfigsClient.ListAuthorizationRules")
		defer func() {
			sc := -1
			if result.sarlr.Response.Response != nil {
				sc = result.sarlr.Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil}}},
		{TargetValue: namespaceName,
			Constraints: []validation.Constraint{{Target: "namespaceName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "namespaceName", Name: validation.MinLength, Rule: 6, Chain: nil}}},
		{TargetValue: alias,
			Constraints: []validation.Constraint{{Target: "alias", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "alias", Name: validation.MinLength, Rule: 1, Chain: nil}}}}); err != nil {
		return result, validation.NewError("servicebus.DisasterRecoveryConfigsClient", "ListAuthorizationRules", err.Error())
	}

	result.fn = client.listAuthorizationRulesNextResults
	req, err := client.ListAuthorizationRulesPreparer(ctx, resourceGroupName, namespaceName, alias)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "ListAuthorizationRules", nil, "Failure preparing request")
		return
	}

	resp, err := client.ListAuthorizationRulesSender(req)
	if err != nil {
		result.sarlr.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "ListAuthorizationRules", resp, "Failure sending request")
		return
	}

	result.sarlr, err = client.ListAuthorizationRulesResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "ListAuthorizationRules", resp, "Failure responding to request")
	}
	if result.sarlr.hasNextLink() && result.sarlr.IsEmpty() {
		err = result.NextWithContext(ctx)
	}

	return
}

// ListAuthorizationRulesPreparer prepares the ListAuthorizationRules request.
func (client DisasterRecoveryConfigsClient) ListAuthorizationRulesPreparer(ctx context.Context, resourceGroupName string, namespaceName string, alias string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"alias":             autorest.Encode("path", alias),
		"namespaceName":     autorest.Encode("path", namespaceName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2017-04-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ServiceBus/namespaces/{namespaceName}/disasterRecoveryConfigs/{alias}/AuthorizationRules", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// ListAuthorizationRulesSender sends the ListAuthorizationRules request. The method will close the
// http.Response Body if it receives an error.
func (client DisasterRecoveryConfigsClient) ListAuthorizationRulesSender(req *http.Request) (*http.Response, error) {
	return client.Send(req, azure.DoRetryWithRegistration(client.Client))
}

// ListAuthorizationRulesResponder handles the response to the ListAuthorizationRules request. The method always
// closes the http.Response Body.
func (client DisasterRecoveryConfigsClient) ListAuthorizationRulesResponder(resp *http.Response) (result SBAuthorizationRuleListResult, err error) {
	err = autorest.Respond(
		resp,
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// listAuthorizationRulesNextResults retrieves the next set of results, if any.
func (client DisasterRecoveryConfigsClient) listAuthorizationRulesNextResults(ctx context.Context, lastResults SBAuthorizationRuleListResult) (result SBAuthorizationRuleListResult, err error) {
	req, err := lastResults.sBAuthorizationRuleListResultPreparer(ctx)
	if err != nil {
		return result, autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "listAuthorizationRulesNextResults", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}
	resp, err := client.ListAuthorizationRulesSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "listAuthorizationRulesNextResults", resp, "Failure sending next results request")
	}
	result, err = client.ListAuthorizationRulesResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "listAuthorizationRulesNextResults", resp, "Failure responding to next results request")
	}
	return
}

// ListAuthorizationRulesComplete enumerates all values, automatically crossing page boundaries as required.
func (client DisasterRecoveryConfigsClient) ListAuthorizationRulesComplete(ctx context.Context, resourceGroupName string, namespaceName string, alias string) (result SBAuthorizationRuleListResultIterator, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/DisasterRecoveryConfigsClient.ListAuthorizationRules")
		defer func() {
			sc := -1
			if result.Response().Response.Response != nil {
				sc = result.page.Response().Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	result.page, err = client.ListAuthorizationRules(ctx, resourceGroupName, namespaceName, alias)
	return
}

// ListKeys gets the primary and secondary connection strings for the namespace.
// Parameters:
// resourceGroupName - name of the Resource group within the Azure subscription.
// namespaceName - the namespace name
// alias - the Disaster Recovery configuration name
// authorizationRuleName - the authorization rule name.
func (client DisasterRecoveryConfigsClient) ListKeys(ctx context.Context, resourceGroupName string, namespaceName string, alias string, authorizationRuleName string) (result AccessKeys, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/DisasterRecoveryConfigsClient.ListKeys")
		defer func() {
			sc := -1
			if result.Response.Response != nil {
				sc = result.Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil}}},
		{TargetValue: namespaceName,
			Constraints: []validation.Constraint{{Target: "namespaceName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "namespaceName", Name: validation.MinLength, Rule: 6, Chain: nil}}},
		{TargetValue: alias,
			Constraints: []validation.Constraint{{Target: "alias", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "alias", Name: validation.MinLength, Rule: 1, Chain: nil}}},
		{TargetValue: authorizationRuleName,
			Constraints: []validation.Constraint{{Target: "authorizationRuleName", Name: validation.MaxLength, Rule: 50, Chain: nil},
				{Target: "authorizationRuleName", Name: validation.MinLength, Rule: 1, Chain: nil}}}}); err != nil {
		return result, validation.NewError("servicebus.DisasterRecoveryConfigsClient", "ListKeys", err.Error())
	}

	req, err := client.ListKeysPreparer(ctx, resourceGroupName, namespaceName, alias, authorizationRuleName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "ListKeys", nil, "Failure preparing request")
		return
	}

	resp, err := client.ListKeysSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "ListKeys", resp, "Failure sending request")
		return
	}

	result, err = client.ListKeysResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "servicebus.DisasterRecoveryConfigsClient", "ListKeys", resp, "Failure responding to request")
	}

	return
}

// ListKeysPreparer prepares the ListKeys request.
func (client DisasterRecoveryConfigsClient) ListKeysPreparer(ctx context.Context, resourceGroupName string, namespaceName string, alias string, authorizationRuleName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"alias":                 autorest.Encode("path", alias),
		"authorizationRuleName": autorest.Encode("path", authorizationRuleName),
		"namespaceName":         autorest.Encode("path", namespaceName),
		"resourceGroupName":     autorest.Encode("path", resourceGroupName),
		"subscriptionId":        autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2017-04-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ServiceBus/namespaces/{namespaceName}/disasterRecoveryConfigs/{alias}/AuthorizationRules/{authorizationRuleName}/listKeys", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// ListKeysSender sends the ListKeys request. The method will close the
// http.Response Body if it receives an error.
func (client DisasterRecoveryConfigsClient) ListKeysSender(req *http.Request) (*http.Response, error) {
	return client.Send(req, azure.DoRetryWithRegistration(client.Client))
}

// ListKeysResponder handles the response to the ListKeys request. The method always
// closes the http.Response Body.
func (client DisasterRecoveryConfigsClient) ListKeysResponder(resp *http.Response) (result AccessKeys, err error) {
	err = autorest.Respond(
		resp,
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}