Break out the totals into peak and off peak costs / kWh

[Annaka007]

The entities show the totals for kWh and Costs, would it be possible to add more entities that show the peak and off-peak separately from the totals ie the build up.

Expected behavior
for example :-
Peak kWH = 2 , Off-Peak kWH = 4 , Total kWH = 6
Peak Cost = 24p , Off-Peak kWH = 48p , Total kWH = 72p

This would make it so much easier to understand the total cost build up and usage and how the totals are calculated.
Apologise if there is an easy way to already do this, but I'm still learning

[BottlecapDave]

Hello, sorry for the late response. I'm afraid I'm not planning to add this in the future as peak/off peak is not a universal term for all tariffs and gets quite complicated.

[BottlecapDave]

Hi @Annaka007. After you raised this issue, I had a few more requests. This feature is now available in the latest release (v7.1.0) for previous consumption sensors. These sensors are disabled by default, but can be enabled to provide this functionality.

[Annaka007]

Hey good job, thanks for implementing, all working nicely. Regards Annaka From: David Kendall ***@***.*** Sent: 11 May 2023 08:58 To: BottlecapDave/HomeAssistant-OctopusEnergy ***@***.***> Cc: Annaka007 ***@***.***>; Mention ***@***.***> Subject: Re: [BottlecapDave/HomeAssistant-OctopusEnergy] Break out the totals into peak and off peak costs / kWh (Issue #113) Hi @Annaka007 <https://github.com/Annaka007> . After you raised this issue, I had a few more requests. This feature is now available in the latest release (v7.1.0) for previous consumption sensors. These sensors are disabled by default, but can be enabled to provide this functionality. — Reply to this email directly, view it on GitHub <#113 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AM36A7G5EOPQTKOTROHYTODXFSLYLANCNFSM6AAAAAATIQRXSQ> . You are receiving this because you were mentioned.Message ID: ***@***.***>