Skip to content

A fast and flexible simulation infrastructure for exploring general-purpose processing-in-memory (PIM) architectures. Ramulator-PIM combines a widely-used simulator for out-of-order and in-order processors (ZSim) with Ramulator, a DRAM simulator with memory models for DDRx, LPDDRx, GDDRx, WIOx, HBMx, and HMCx. Ramulator is described in the IEEE …

Notifications You must be signed in to change notification settings

CMU-SAFARI/ramulator-pim

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

12 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

ZSim+Ramulator - A Processing-in-Memory Simulation Framework

ZSim+Ramulator is a framework for design space exploration of general-purpose Processing-in-Memory (PIM) architectures. The framework is based on two widely-known simulators: ZSim [1] and Ramulator [2][3].

We consider a computing system that includes host CPU cores and general-purpose PIM cores. The PIM cores are placed in the logic layer of a 3D-stacked memory (Ramulator's HMC model). With this simulation framework, we can simulate host CPU cores and general-purpose PIM cores with the aim of comparing the performance of both for an application or parts of it. The simulation framework does not currently support concurrent execution on host and PIM cores.

We use ZSim to generate memory traces that are fed to Ramulator. We modified ZSim to generate two type of traces: 1) filtered traces for simulation of the host CPU cores, and 2) unfiltered traces for the simulation of the PIM cores.

  1. Filtered traces: We obtain them by gathering memory requests at the memory controller. This way, the cache hierarchy of the host (including the coherence protocol) is simulated in ZSim. ZSim can also simulate hardware prefetchers.

  2. Unfiltered traces: We obtain them by gathering all memory requests as soon as they are issued by the core pipeline.

Ramulator simulates the memory accesses of the host cores and the PIM cores by using, respectively, the filtered and unfiltered traces produced with ZSim. Ramulator contains simple models of out-of-order and in-order cores that can be used for simulation of host and PIM. For the simulation of the PIM cores in the logic layer of 3D-stacked memory, we modified Ramulator to avoid the overheads of the off-chip link.

Citation

Please cite the following papers if you find this simulation infrastructure useful:

Yoongu Kim, Weikun Yang, and Onur Mutlu, "Ramulator: A Fast and Extensible DRAM Simulator". IEEE Computer Architecture Letters (CAL), March 2015.

Gagandeep Singh, Juan Gomez-Luna, Giovanni Mariani, Geraldo Francisco de Oliveira, Stefano Corda, Sander Stujik, Onur Mutlu, and Henk Corporaal, "NAPEL: Near-Memory Computing Application Performance Prediction via Ensemble Learning". Proceedings of the 56th Design Automation Conference (DAC), Las Vegas, NV, USA, June 2019.

Repository Structure and Installation

We point out next the repository structure and some important folders and files.

.
+-- README.md
+-- common/
|   +-- DRAMPower/
+-- ramulator/
|   +-- Configs/
|   +-- sample_traces/
|	|	+-- host/
|	|	+-- pim/
|	+-- src/
+-- zsim-ramulator/
|   +-- benchmarks/
|	|	+-- rodinia/
|   +-- clean.sh
|   +-- compile.sh
|   +-- setup.sh
|   +-- tests/
|	|	+-- host.cfg
|	|	+-- host_prefetch.cfg
|	|	+-- pim.cfg

Prerequisites

Our framework requires both ZSim and Ramulator dependencies.

  • Ramulator requires a C++11 compiler (e.g., clang++, g++-5).
  • ZSim requires gcc >=4.6, pin, scons, libconfig, libhdf5, libelfg0. We provide two scripts setup.sh and compile.sh under zsim-ramulator to facilitate ZSim's installation. The first one installs all ZSim's dependencies. The second one compiles ZSim.

Installing

To install ZSim:

cd zsim-ramulator
sudo sh setup.sh
sh compile.sh

To install Ramulator:

cd ramulator
make -j

Alternatively, to resolve all dependencies on the common libraries, you can use the below commands:

sh compileramulator.sh

Generating Traces with ZSim

There are three steps to generate traces with ZSim:

  1. Instrument the code with the hooks provided in zsim-ramulator/misc/hooks/zsim_hooks.h.
  2. Create configuration files for ZSim.
  3. Run.

Next, we describe the three steps in detail:

  1. First, we identify the application's hotspot. We refer to it as offload region, i.e., the region of code that will run in the PIM cores. We instrument the application by including the following code:
#include "zsim-ramulator/misc/hooks/zsim_hooks.h"
foo(){
    /*
    * zsim_roi_begin() marks the beginning of the region of interest (ROI).
    * It must be included in a serial part of the code.
    */
	zsim_roi_begin(); 
	zsim_PIM_function_begin(); // Indicates the beginning of the code to simulate (hotspot).
	...
	zsim_PIM_function_end(); // Indicates the end of the code to simulate.
    /*
    * zsim_roi_end() marks the end of the ROI. 
    * It must be included in a serial part of the code. 
    */
	zsim_roi_end(); 
}
  1. Second, we create the configuration files to execute the application using ZSim. Sample configuration files for filtered (host.cfg, host_prefetch.cfg) and unfiltered (pim.cfg) traces are provided under zsim-ramulator/tests/. Please, check those files to understand how to configure the number of cores, number of caches and their sizes, and number prefetchers. Next, we describe other important knobs that can be changed in the configuration files:
  • only_offload=true|false: When set to true, ZSim will generate traces only between zsim_PIM_function_begin and zsim_PIM_function_end. When set to false, it will generate traces for the whole ROI.
  • pim_traces=true|false: When set to true, ZSim will generate unfiltered traces. When set to false, it will generate filtered traces.
  • instr_traces=true|false: When set to true, ZSim will also get traces for Instruction Cache Misses.
  • outFile=string: Name of the output file.
  • max_offload_instrs: Maximum number of offload instructions to instrument.
  • merge_hostTraces = true|false: When set to true, ZSim will generate a single file with the whole trace for N Cores. When set to false, it will generate one trace file per core. Setting this flag to true slows down the trace collection significantly due to syncronization.
  1. Third, we run ZSim:
./build/opt/zsim configuration_file.cfg

Trace format

ZSim generates traces with the following format:

THREAD_ID PROCESSOR_ID INSTR_NUM TYPE ADDRESS SIZE

where TYPE can be:

  • L: Memory trace of a load (read) request
  • S: Memory trace of a store (write) request
  • P: Memory trace of a prefetching request
  • I: Memory trace of an instruction request

The other fields in the trace file are:

  • THREAD_ID: Which thread generated the request.
  • PROCESSOR_ID: Which core generated the request.
  • INSTR_NUM: The number of non-memory instructions that were executed before the memory request was generated.
  • ADDRESS: The virtual memory address of the memory request.
  • SIZE: The size of the memory request in bytes.

Example Trace Generation

Under zsim_ramulator/benchmarks we provide a sample instrumented code for the BFS implementation included in the Rodinia benchmarks suite. The code is under zsim_ramulator/benchmarks/rodinia. We instrument the function BFSGraph. To compile the application:

cd zsim_ramulator/benchmarks/rodinia/
make 

The sample ZSim configuration files under tests (host.cfg, host_prefetch.cfg,pim.cfg) are configured to read the binary generated by the previous step and run the BFS application. Therefore, to generate the trace files, from zsim-ramulator:

./build/opt/zsim tests/host.cfg
./build/opt/zsim tests/host_prefetch.cfg
./build/opt/zsim tests/pim.cfg

These will generate the trace files under zsim-ramulator (rodiniaBFS.out.*,rodiniaBFS-prefetcher.out.*, pim-rodiniaBFS.out.*, respectively).

Running Ramulator

This is a modified version of Ramulator for simulation of PIM architectures. This version of Ramulator can simulate both host and PIM cores. To configure the mode, include in the configuration file (.cfg) one of the next two options:

  • pim_mode = 0 (for host)
  • pim_mode = 1 (for pim)

Sample configuration files are provided under ramulator/Configs/.

Some other knobs that can be configured are:

  • --config: Ramulator's configuration file.
  • --stats: The file to which Ramulator will write the results of the simulator.
  • --trace: The trace file that should be loaded.
  • --disable-per-scheduling true|false: When set to true, it enables perfect memory scheduling, where each memory request is placed in the respective vault based on HMC interleaving. When set to false, the requests are scheduled based on the PROCESSOR_ID in each memory trace of the trace file.
  • --core-org=outOrder|inOrder: For simulation of out-of-order or in-order cores.
  • --number-cores=: Number of cores to simulate.
  • --trace-format=zsim|pin|pisa: Defines the source of the memory traces. Use zsim for filtered or unfiltered traces generated with our modified ZSim. Other options are traces generated with a Pin tool or with PISA.
  • --split-trace=true|false: When set to true, Ramulator will open a single trace file, store it in memory, and split the trace file among the number-cores cores according to the core-id in the trace. When set to false, Ramulator will open one trace file per core and read it line-by-line during the simulation (it expects each trace to end with .core_id -- from 0 ... number-cores-1). We strongly suggest to use --split-trace=true because large trace files might lead to memory overload.
  • --mode=cpu: Ramulator can simulate either a system with cpu and DRAM, or only the DRAM by itself. Ramulator must operate in CPU trace mode for this framework.

Sample ZSim trace files are provided under sample_traces/. Before using them, decompress each trace file.

To run the host simulation:

./ramulator --config Configs/host.cfg --disable-perf-scheduling true --mode=cpu --stats host.stats --trace sample_traces/host/rodiniaBFS.out --core-org=outOrder --number-cores=4 --trace-format=zsim --split-trace=true

To run the PIM simulation:

./ramulator --config Configs/pim.cfg --disable-perf-scheduling true --mode=cpu --stats pim.stats --trace sample_traces/pim/pim-rodiniaBFS.out --core-org=outOrder --number-cores=4 --trace-format=zsim --split-trace=true

Acknowledgments

The development of this simulation framework was partially supported by the Semiconductor Research Corporation. We also thank our industrial partners, especially Alibaba, Facebook, Google, Huawei, Intel, Microsoft, and VMware, for their generous donations.

About

A fast and flexible simulation infrastructure for exploring general-purpose processing-in-memory (PIM) architectures. Ramulator-PIM combines a widely-used simulator for out-of-order and in-order processors (ZSim) with Ramulator, a DRAM simulator with memory models for DDRx, LPDDRx, GDDRx, WIOx, HBMx, and HMCx. Ramulator is described in the IEEE …

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published