Welcome to dlt-viewer Discussions!

[alexmucde]

👋 Welcome!

We’re using Discussions as a place to connect with other members of our community. We hope that you:

• Ask questions you’re wondering about.
• Share ideas.
• Engage with other community members.
• Welcome others and are open-minded. Remember that this is a community we
  build together 💪.

To get started, comment below with an introduction of yourself and tell us about what you do with this community.

[sathyan1997]

Hi,
In DLT viewer we can connect using UDP the IP and Port of the server is given in the Dialog box, After the ECU connect the logs weren't reporting.
The same data over other drivers like UART is reporting in DLT, what is the reason behind the issue?

[alexmucde]

@sathyan1997 In the lattest version for UDP you have to select the Ethernet Interface in the dropdown box instead of using the IP address.

[sathyan1997]

Hi @alexmucde i am using version 2.20.0 DLT viewer in the drop down of the Interface Type only("UDP","TCP","SERIAL") is available

[alexmucde]

@sathyan1997 Yes correctly, select UDP and in the UDP Tab select the receiving interface.

[sathyan1997]

okay @alexmucde in the UDP whether i need to configure the Receiving IP and Source Target port or else Any IP and Receiving Port

[sathyan1997]

The data transmitted over UDP over the Source port 2xxxx to destination port 5xxxx is visible in Wireshark but the same destination port with any ip is configured in DLT viewer and the data is not received in DLT Viewer(ECU Connect is also not going online ,showing Binding Failed(transmitter IP and port is given))

[alexmucde]

I think it is an an issue on your PC. On our side it is always working. If you find any issue in the source code let us know.

[leo-lu-niz]

Hi Team,

I am using DLT viewer 2.20 vision, and I set filter to only receive DEBUG message, but I have no idea why I could not receive DEBUG message?

I could receive other levels， so I guess it is not the connection problem.

Any help or guidance would be awesome.. thanks in advance.

Leo

[philrob17]

Le mer. 14 déc. 2022 à 16:09, sathyan1997 ***@***.***> a écrit :

…

Hi, In DLT viewer we can connect using UDP the IP and Port of the server is given in the Dialog box, After the ECU connect the logs weren't reporting. The same data over other drivers like UART is reporting in DLT, what is the reason behind the issue? — Reply to this email directly, view it on GitHub <#229 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AB6ULL7Z772VDCLRZA3ZLUTWNHPJJANCNFSM5H4ETSIA> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>