Initial CR-30 firmware

Based on NAK3DDesigns/CR-30-Firmware@67b5507
CR30-Users · Apr 12, 2021 · c93a972 · c93a972
1 parent b9d9e74
commit c93a972
Show file tree

Hide file tree

Showing 40 changed files with 1,746 additions and 534 deletions.
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
@@ -656,13 +656,13 @@
 
 //#define SENSORLESS_BACKOFF_MM  { 2, 2 }     // (mm) Backoff from endstops before sensorless homing
 
-#define HOMING_BUMP_MM      { 5, 5, 2 }       // (mm) Backoff from endstops after first bump
+#define HOMING_BUMP_MM      { 5, 12, 0 }       // (mm) Backoff from endstops after first bump
 #define HOMING_BUMP_DIVISOR { 2, 2, 4 }       // Re-Bump Speed Divisor (Divides the Homing Feedrate)
 
-//#define HOMING_BACKOFF_POST_MM { 2, 2, 2 }  // (mm) Backoff from endstops after homing
+#define HOMING_BACKOFF_POST_MM { 0, 0, 0 }  // (mm) Backoff from endstops after homing
 
 //#define QUICK_HOME                          // If G28 contains XY do a diagonal move first
-//#define HOME_Y_BEFORE_X                     // If G28 contains XY home Y before X
+#define HOME_Y_BEFORE_X                       // If G28 contains XY home Y before X
 //#define HOME_Z_FIRST                        // Home Z first. Requires a Z-MIN endstop (not a probe).
 //#define CODEPENDENT_XY_HOMING               // If X/Y can't home without homing Y/X first
 
@@ -845,7 +845,7 @@
  * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period.
  * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
  */
-#define DEFAULT_STEPPER_DEACTIVE_TIME 120
+#define DEFAULT_STEPPER_DEACTIVE_TIME 300
 #define DISABLE_INACTIVE_X true
 #define DISABLE_INACTIVE_Y true
 #define DISABLE_INACTIVE_Z true  // Set 'false' if the nozzle could fall onto your printed part!
@@ -1043,8 +1043,8 @@
    * AZTEEG_X5_MINI_WIFI         0x58              0x5C        MCP4451
    * MIGHTYBOARD_REVE      0x2F (0x5E)                         MCP4018
    */
-  //#define DIGIPOT_I2C_ADDRESS_A 0x2C  // Unshifted slave address for first DIGIPOT
-  //#define DIGIPOT_I2C_ADDRESS_B 0x2D  // Unshifted slave address for second DIGIPOT
+  #define DIGIPOT_I2C_ADDRESS_A 0x2C  // Unshifted slave address for first DIGIPOT
+  #define DIGIPOT_I2C_ADDRESS_B 0x2D  // Unshifted slave address for second DIGIPOT
 #endif
 
 //===========================================================================
@@ -1095,7 +1095,7 @@
   #endif
 
   // Include a page of printer information in the LCD Main Menu
-  //#define LCD_INFO_MENU
+  #define LCD_INFO_MENU
   #if ENABLED(LCD_INFO_MENU)
     //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
   #endif
@@ -1139,7 +1139,7 @@
   //#define LCD_TIMEOUT_TO_STATUS 15000
 
   #if ENABLED(SHOW_BOOTSCREEN)
-    #define BOOTSCREEN_TIMEOUT 4000      // (ms) Total Duration to display the boot screen(s)
+    #define BOOTSCREEN_TIMEOUT 2000      // (ms) Total Duration to display the boot screen(s)
     #if EITHER(HAS_MARLINUI_U8GLIB, TFT_COLOR_UI)
       #define BOOT_MARLIN_LOGO_SMALL     // Show a smaller Marlin logo on the Boot Screen (saving lots of flash)
     #endif
@@ -1200,12 +1200,12 @@
   //#define SD_IGNORE_AT_STARTUP            // Don't mount the SD card when starting up
   //#define SDCARD_READONLY                 // Read-only SD card (to save over 2K of flash)
 
-  //#define GCODE_REPEAT_MARKERS            // Enable G-code M808 to set repeat markers and do looping
+  #define GCODE_REPEAT_MARKERS              // Enable G-code M808 to set repeat markers and do looping
 
   #define SD_PROCEDURE_DEPTH 1              // Increase if you need more nested M32 calls
 
   #define SD_FINISHED_STEPPERRELEASE true   // Disable steppers when SD Print is finished
-  #define SD_FINISHED_RELEASECOMMAND "M84"  // Use "M84XYE" to keep Z enabled so your bed stays in place
+  #define SD_FINISHED_RELEASECOMMAND "G28XY\nG1Y5\nM84"  // Use "M84XYE" to keep Z enabled so your bed stays in place
 
   // Reverse SD sort to show "more recent" files first, according to the card's FAT.
   // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
@@ -1218,7 +1218,7 @@
 
   //#define BROWSE_MEDIA_ON_INSERT          // Open the file browser when media is inserted
 
-  #define EVENT_GCODE_SD_ABORT "G28XY"      // G-code to run on SD Abort Print (e.g., "G28XY" or "G27")
+  #define EVENT_GCODE_SD_ABORT "G28XY\nG1Y5" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27")
 
   #if ENABLED(PRINTER_EVENT_LEDS)
     #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
@@ -1232,9 +1232,9 @@
    * an option on the LCD screen to continue the print from the last-known
    * point in the file.
    */
-  //#define POWER_LOSS_RECOVERY
+  #define POWER_LOSS_RECOVERY
   #if ENABLED(POWER_LOSS_RECOVERY)
-    #define PLR_ENABLED_DEFAULT   false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
+    #define PLR_ENABLED_DEFAULT    true // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
     //#define BACKUP_POWER_SUPPLY       // Backup power / UPS to move the steppers on power loss
     //#define POWER_LOSS_RECOVER_ZHOME  // Z homing is needed for proper recovery. 99.9% of the time this should be disabled!
     //#define POWER_LOSS_ZRAISE       2 // (mm) Z axis raise on resume (on power loss with UPS)
@@ -1419,7 +1419,7 @@
   #define XYZ_HOLLOW_FRAME
 
   // Enable to save many cycles by drawing a hollow frame on Menu Screens
-  #define MENU_HOLLOW_FRAME
+  //#define MENU_HOLLOW_FRAME
 
   // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM.
   // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
@@ -1655,16 +1655,16 @@
  *
  * Warning: Does not respect endstops!
  */
-//#define BABYSTEPPING
+#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
   //#define INTEGRATED_BABYSTEPPING         // EXPERIMENTAL integration of babystepping into the Stepper ISR
   //#define BABYSTEP_WITHOUT_HOMING
-  //#define BABYSTEP_ALWAYS_AVAILABLE       // Allow babystepping at all times (not just during movement).
-  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_ALWAYS_AVAILABLE         // Allow babystepping at all times (not just during movement).
+  #define BABYSTEP_XY                       // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
   //#define BABYSTEP_MILLIMETER_UNITS       // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps
-  #define BABYSTEP_MULTIPLICATOR_Z  1       // (steps or mm) Steps or millimeter distance for each Z babystep
-  #define BABYSTEP_MULTIPLICATOR_XY 1       // (steps or mm) Steps or millimeter distance for each XY babystep
+  #define BABYSTEP_MULTIPLICATOR_Z  11       // (steps or mm) Steps or millimeter distance for each Z babystep
+  #define BABYSTEP_MULTIPLICATOR_XY 2       // (steps or mm) Steps or millimeter distance for each XY babystep
 
   //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
   #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
@@ -1676,7 +1676,7 @@
     #endif
   #endif
 
-  //#define BABYSTEP_DISPLAY_TOTAL          // Display total babysteps since last G28
+  #define BABYSTEP_DISPLAY_TOTAL          // Display total babysteps since last G28
 
   //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
@@ -2143,7 +2143,7 @@
  * Requires NOZZLE_PARK_FEATURE.
  * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
  */
-//#define ADVANCED_PAUSE_FEATURE
+#define ADVANCED_PAUSE_FEATURE
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
   #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
   #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
@@ -2181,7 +2181,7 @@
   #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
   #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
 
-  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
+  #define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
   //#define HOME_BEFORE_FILAMENT_CHANGE           // If needed, home before parking for filament change
 
   //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
@@ -2992,7 +2992,7 @@
 #if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
   #define SPINDLE_LASER_ACTIVE_STATE    LOW    // Set to "HIGH" if the on/off function is active HIGH
   #define SPINDLE_LASER_PWM             true   // Set to "true" if your controller supports setting the speed/power
-  #define SPINDLE_LASER_PWM_INVERT      false  // Set to "true" if the speed/power goes up when you want it to go slower
+  #define SPINDLE_LASER_PWM_INVERT      true  // Set to "true" if the speed/power goes up when you want it to go slower
 
   #define SPINDLE_LASER_FREQUENCY       2500   // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
 

diff --git a/Marlin/Version.h b/Marlin/Version.h
@@ -28,7 +28,7 @@
 /**
  * Marlin release version identifier
  */
-//#define SHORT_BUILD_VERSION "bugfix-2.0.x"
+#define SHORT_BUILD_VERSION "bugfix-2.0.x-kage"
 
 /**
  * Verbose version identifier which should contain a reference to the location