You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
This repository has been archived by the owner on Jun 4, 2024. It is now read-only.
Nathanael Schneider edited this page May 28, 2022
·
2 revisions
The PelcoD-Plugin allows you to control certain cameras using the PelcoD-Protocol. This plugin requires an RS485-interface to be connected.
Global Settings
You have to specify which COM-Port the plugin should use to communicate with the camera as well as the baud rate, which needs to match the baud rate of your camera.
You also have to configure the available presets of your camera(s) on the bus. For a single camera, the camera id is probably 01. You can give the presets a recognizable name for later and group them. The groups will be used to find the different presets easier in the slot settings.
Slot Settings
Fairly straight forward. Select a preset to activate it when the scene gets activated. Each camera can have a preset assigned and the list will be grouped based on the groups defined in the settings.