Custom Component for NeoSmartBlinds Integration on Home Assistant

The NeoSmartBlinds platform allows you to control a NeoSmartBlind / group of NeoSmartBlinds via a NeoSmartBlinds controller.

There is currently support for the following device types within Home Assistant:

• Cover

Installation

To begin with it is recommended you ensure your NeoSmartBlinds controller has a static IP addresses, you may need to configure this via your routers DHCP options.

Download the custom component in to your folder <config_directory>/custom_components/neosmartblinds

Cover Configuration

Example of basic configuration.yaml

cover:
  - platform: neosmartblinds
    name: Blind One
    host: 192.168.0.13
    blind_code: 021.230-04-
    close_time: 65

Configuration variables

cover:

platform (string)(Required) Must be set to neosmartblinds

host (string)(Required) The IP of the NeoSmartBlinds controller, e.g., 192.168.0.10.

name (string)(Required) The name you would like to give to the NeoSmartBlind.

blind_code (string)(Required) The blind code. - this is available from the NeoSmartBlind app

close_time (string)(Required) Time taken in seconds to close this blind (use a stop watch to measure)

Supported features

Open Up

Close Down

Tilt-Up Micro-Up

Tilt-Down Micro-Down

Set-Position & Favourite Position - please note this is calculated using the close_time

Setting the position:

<= 49 will move the blind down, this means set position 25, moves the blind down and stops after 50% of your close_time

>=51 will move the blind up, this means set position 75, moves the blind up and stops after 50% of your close_time

==50 will set your blind to its stored favourite position