Raspberry Pi

Update: Try our experimental GUI installer for Raspberry Pi OS 64 and Ubuntu 20.04 LTS or newer on ARM64.

The following recipe was tested on a Pi 4 (4GiB RAM) running both Ubuntu Server 20.04 LTS 64 bit and Raspbian 64 bit. 64 bit OSes and python 3.7+ are required but helpfully Ubuntu 20.04 has python 3.8 out of the box and Raspbian ships with python 3.7. You can't just run a 64 bit kernel with a 32 bit OS install as you need 64 bit python 3.7+ also.

This was tested with Raspberry Pi Imager, using image Ubuntu Server 20.04 LTS (Pi 3/4) 64 bit, and Raspbian 64 bit using the 2020-08-20-raspios-buster-arm64.zip image. We make available manylinux2014 ARM64 binary wheels for the main chia dependencies which makes installing on Raspberry Pi pretty easy.

You will need to set up or adjust swap space if you want to build or run the GUI. If you just want to run headless you can skip the swap steps.

For Ubuntu 20.04 LTS, 1024MiB is suggested:

sudo dd if=/dev/zero of=/swap bs=1M count=1024
sudo chmod 600 /swap ; sudo mkswap /swap ; sudo swapon /swap

Add this line to /etc/fstab so that swap available on reboot. If you plan to run Ubuntu Desktop and the GUI, you will need the swap space on subsequent reboots.

/swap swap swap defaults 0 0

For Raspbian 64:

You need 1000/1024MiB of swap space. Here is an excellent walk through of increasing swap space on Raspbian 64.

First some setup:

# Make sure you have a couple requirements to compile items that aren't in binary form
sudo apt-get install -y build-essential python3-dev

# If you are not using Raspbian 64 (it pre-specifies it) add this
export PIP_EXTRA_INDEX_URL=https://www.piwheels.org/simple/

# Make sure you have 64 bit Python 3
python3 -c 'import platform; print(platform.architecture())'

Then proceed with a relative usual install process:

git clone https://github.com/Chia-Network/chia-blockchain.git
cd chia-blockchain

sh install.sh
. ./activate
chia init

# Optionally generate keys - can be done in the GUI later
chia keys generate

# Or you can import from 24 words
chia keys add -m [24 words]

But you are getting an error related to not being able to find a blspy version that satisfies 0.3.1 you say or ERROR: Could not find a version that satisfies the requirement clvm-rs==0.1.3? Frankly with any install error message, you're probably trying to install on 32 bit Raspbian. You can check by running uname -a and if it says arm7l you need a 64 bit version of your favorite OS. uname -a should end with aarch64 GNU/Linux.

The Pi isn't cut out to be a Timelord and the Timelord requirements are very x86-64 specific currently and there is one piece of magic. You don't need this magic anymore now that chiavdf comes from a binary wheel on PyPi but we're leaving this here for people trying to build in other environments. This environment variable is set so that chiavdf doesn't attempt to compile Timelord components.

export BUILD_VDF_CLIENT=N

This should work on Pi 3 with 64 bit Ubuntu but has not been tested. Please update this if that changes.

It is feasible to plot with the Pi but it's slow. Modern desktops and laptops plot in the 0.07 - 0.10 GiB/minute range and the Pi 4 plots at 0.025 GiB/minute. Plotting times for Pi 4 and other machines are available. Pi makes an excellent node/farmer/harvester however and is an economical machine to run and farm plots made on faster plotting machines and then transferred to it to harvest/farm.

Headless

You can run without the GUI using commands like chia init, chia start farmer, and watch 'chia show -s -c'. Be sure to check out chia show -h if you do.

Installing and running the GUI on Ubuntu 20.04 or Raspbian 64 bit

sh install-gui.sh
cd chia-blockchain-gui
npm run electron &