Merge branch 'errata/tx2-219' into for-next/fixes

Workaround for Cavium/Marvell ThunderX2 erratum #219.

* errata/tx2-219:
  arm64: Allow CAVIUM_TX2_ERRATUM_219 to be selected
  arm64: Avoid Cavium TX2 erratum 219 when switching TTBR
  arm64: Enable workaround for Cavium TX2 erratum 219 when running SMT
  arm64: KVM: Trap VM ops when ARM64_WORKAROUND_CAVIUM_TX2_219_TVM is set

Documentation/arm64/silicon-errata.rst

@@ -107,6 +107,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX2 SMMUv3| #126            | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
+| Cavium         | ThunderX2 Core  | #219            | CAVIUM_TX2_ERRATUM_219      |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Freescale/NXP  | LS2080A/LS1043A | A-008585        | FSL_ERRATUM_A008585         |
 +----------------+-----------------+-----------------+-----------------------------+

Documentation/devicetree/bindings/dsp/fsl,dsp.yaml

@@ -85,4 +85,5 @@ examples:
                         <&pd IMX_SC_R_DSP_RAM>;
         mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1";
         mboxes = <&lsio_mu13 2 0>, <&lsio_mu13 2 1>, <&lsio_mu13 3 0>, <&lsio_mu13 3 1>;
+        memory-region = <&dsp_reserved>;
     };

Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml

@@ -43,13 +43,9 @@ properties:
 
   dvdd-supply:
     description: DVdd voltage supply
-    items:
-      - const: dvdd
 
   avdd-supply:
     description: AVdd voltage supply
-    items:
-      - const: avdd
 
   adi,rejection-60-Hz-enable:
     description: |
@@ -99,6 +95,9 @@ required:
 examples:
   - |
     spi0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
       adc@0 {
         compatible = "adi,ad7192";
         reg = <0>;

Documentation/devicetree/bindings/media/rc.yaml

@@ -73,7 +73,6 @@ properties:
           - rc-genius-tvgo-a11mce
           - rc-gotview7135
           - rc-hauppauge
-          - rc-hauppauge
           - rc-hisi-poplar
           - rc-hisi-tv-demo
           - rc-imon-mce

Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml

@@ -37,7 +37,7 @@ properties:
       - description: exclusive PHY reset line
       - description: shared reset line between the PCIe PHY and PCIe controller
 
-  resets-names:
+  reset-names:
     items:
       - const: phy
       - const: pcie

Documentation/kbuild/makefiles.rst

@@ -954,11 +954,6 @@ When kbuild executes, the following steps are followed (roughly):
 
 	From commandline LDFLAGS_MODULE shall be used (see kbuild.txt).
 
-    KBUILD_ARFLAGS   Options for $(AR) when creating archives
-
-	$(KBUILD_ARFLAGS) set by the top level Makefile to "D" (deterministic
-	mode) if this option is supported by $(AR).
-
     KBUILD_LDS
 
 	The linker script with full path. Assigned by the top-level Makefile.

Documentation/kbuild/modules.rst

@@ -498,10 +498,11 @@ build.
 	will be written containing all exported symbols that were not
 	defined in the kernel.
 
---- 6.3 Symbols From Another External Module
+6.3 Symbols From Another External Module
+----------------------------------------
 
 	Sometimes, an external module uses exported symbols from
-	another external module. kbuild needs to have full knowledge of
+	another external module. Kbuild needs to have full knowledge of
 	all symbols to avoid spitting out warnings about undefined
 	symbols. Three solutions exist for this situation.
 
@@ -521,7 +522,7 @@ build.
 		The top-level kbuild file would then look like::
 
 			#./Kbuild (or ./Makefile):
-				obj-y := foo/ bar/
+				obj-m := foo/ bar/
 
 		And executing::
 

Documentation/kbuild/reproducible-builds.rst

@@ -16,16 +16,21 @@ the kernel may be unreproducible, and how to avoid them.
 Timestamps
 ----------
 
-The kernel embeds a timestamp in two places:
+The kernel embeds timestamps in three places:
 
 * The version string exposed by ``uname()`` and included in
   ``/proc/version``
 
 * File timestamps in the embedded initramfs
 
-By default the timestamp is the current time.  This must be overridden
-using the `KBUILD_BUILD_TIMESTAMP`_ variable.  If you are building
-from a git commit, you could use its commit date.
+* If enabled via ``CONFIG_IKHEADERS``, file timestamps of kernel
+  headers embedded in the kernel or respective module,
+  exposed via ``/sys/kernel/kheaders.tar.xz``
+
+By default the timestamp is the current time and in the case of
+``kheaders`` the various files' modification times. This must
+be overridden using the `KBUILD_BUILD_TIMESTAMP`_ variable.
+If you are building from a git commit, you could use its commit date.
 
 The kernel does *not* use the ``__DATE__`` and ``__TIME__`` macros,
 and enables warnings if they are used.  If you incorporate external

Documentation/networking/device_drivers/index.rst

@@ -23,6 +23,7 @@ Contents:
    intel/ice
    google/gve
    mellanox/mlx5
+   netronome/nfp
    pensando/ionic
 
 .. only::  subproject and html

Documentation/networking/j1939.rst

@@ -272,7 +272,7 @@ supported flags are:
 * MSG_DONTWAIT, i.e. non-blocking operation.
 
 recvmsg(2)
-^^^^^^^^^
+^^^^^^^^^^
 
 In most cases recvmsg(2) is needed if you want to extract more information than
 recvfrom(2) can provide. For example package priority and timestamp. The

MAINTAINERS

@@ -6112,7 +6112,10 @@ M:	Gao Xiang <gaoxiang25@huawei.com>
 M:	Chao Yu <yuchao0@huawei.com>
 L:	linux-erofs@lists.ozlabs.org
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs.git
+F:	Documentation/filesystems/erofs.txt
 F:	fs/erofs/
+F:	include/trace/events/erofs.h
 
 ERRSEQ ERROR TRACKING INFRASTRUCTURE
 M:	Jeff Layton <jlayton@kernel.org>
@@ -9075,6 +9078,7 @@ F:	security/keys/
 KGDB / KDB /debug_core
 M:	Jason Wessel <jason.wessel@windriver.com>
 M:	Daniel Thompson <daniel.thompson@linaro.org>
+R:	Douglas Anderson <dianders@chromium.org>
 W:	http://kgdb.wiki.kernel.org/
 L:	kgdb-bugreport@lists.sourceforge.net
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb.git

Makefile

@@ -2,8 +2,8 @@
 VERSION = 5
 PATCHLEVEL = 4
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
-NAME = Bobtail Squid
+EXTRAVERSION = -rc2
+NAME = Nesting Opossum
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -206,24 +206,8 @@ ifndef KBUILD_CHECKSRC
   KBUILD_CHECKSRC = 0
 endif
 
-# Use make M=dir to specify directory of external module to build
-# Old syntax make ... SUBDIRS=$PWD is still supported
-# Setting the environment variable KBUILD_EXTMOD take precedence
-ifdef SUBDIRS
-  $(warning ================= WARNING ================)
-  $(warning 'SUBDIRS' will be removed after Linux 5.3)
-  $(warning )
-  $(warning If you are building an individual subdirectory)
-  $(warning in the kernel tree, you can do like this:)
-  $(warning $$ make path/to/dir/you/want/to/build/)
-  $(warning (Do not forget the trailing slash))
-  $(warning )
-  $(warning If you are building an external module,)
-  $(warning Please use 'M=' or 'KBUILD_EXTMOD' instead)
-  $(warning ==========================================)
-  KBUILD_EXTMOD ?= $(SUBDIRS)
-endif
-
+# Use make M=dir or set the environment variable KBUILD_EXTMOD to specify the
+# directory of external module to build. Setting M= takes precedence.
 ifeq ("$(origin M)", "command line")
   KBUILD_EXTMOD := $(M)
 endif
@@ -498,7 +482,6 @@ export CFLAGS_KASAN CFLAGS_KASAN_NOSANITIZE CFLAGS_UBSAN
 export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
 export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
 export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
-export KBUILD_ARFLAGS
 
 # Files to ignore in find ... statements
 
@@ -914,9 +897,6 @@ ifdef CONFIG_RETPOLINE
 KBUILD_CFLAGS += $(call cc-option,-fcf-protection=none)
 endif
 
-# use the deterministic mode of AR if available
-KBUILD_ARFLAGS := $(call ar-option,D)
-
 include scripts/Makefile.kasan
 include scripts/Makefile.extrawarn
 include scripts/Makefile.ubsan

arch/arm/boot/dts/am335x-icev2.dts

@@ -432,7 +432,7 @@
 	pinctrl-0 = <&mmc0_pins_default>;
 };
 
-&gpio0 {
+&gpio0_target {
 	/* Do not idle the GPIO used for holding the VTT regulator */
 	ti,no-reset-on-init;
 	ti,no-idle-on-init;

arch/arm/boot/dts/am33xx-l4.dtsi

@@ -127,7 +127,7 @@
 			ranges = <0x0 0x5000 0x1000>;
 		};
 
-		target-module@7000 {			/* 0x44e07000, ap 14 20.0 */
+		gpio0_target: target-module@7000 {	/* 0x44e07000, ap 14 20.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			ti,hwmods = "gpio1";
 			reg = <0x7000 0x4>,
@@ -2038,7 +2038,9 @@
 			reg = <0xe000 0x4>,
 			      <0xe054 0x4>;
 			reg-names = "rev", "sysc";
-			ti,sysc-midle ;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>;

arch/arm/boot/dts/am4372.dtsi

@@ -337,6 +337,8 @@
 				ti,hwmods = "dss_dispc";
 				clocks = <&disp_clk>;
 				clock-names = "fck";
+
+				max-memory-bandwidth = <230000000>;
 			};
 
 			rfbi: rfbi@4832a800 {

arch/arm/boot/dts/dra7-l4.dtsi

@@ -2732,7 +2732,7 @@
 				interrupt-names = "tx", "rx";
 				dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
 				dma-names = "tx", "rx";
-				clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 22>,
+				clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>,
 					 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
 					 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>;
 				clock-names = "fck", "ahclkx", "ahclkr";
@@ -2768,8 +2768,8 @@
 				interrupt-names = "tx", "rx";
 				dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
 				dma-names = "tx", "rx";
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 22>,
-					 <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>,
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>,
+					 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
 					 <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>;
 				clock-names = "fck", "ahclkx", "ahclkr";
 				status = "disabled";
@@ -2786,9 +2786,8 @@
 					<SYSC_IDLE_SMART>;
 			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
 			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 28>;
-			clock-names = "fck", "ahclkx", "ahclkr";
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x68000 0x2000>,
@@ -2804,7 +2803,7 @@
 				interrupt-names = "tx", "rx";
 				dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
 				dma-names = "tx", "rx";
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 22>,
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>,
 					 <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
 				clock-names = "fck", "ahclkx";
 				status = "disabled";
@@ -2821,9 +2820,8 @@
 					<SYSC_IDLE_SMART>;
 			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
 			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 28>;
-			clock-names = "fck", "ahclkx", "ahclkr";
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x6c000 0x2000>,
@@ -2839,7 +2837,7 @@
 				interrupt-names = "tx", "rx";
 				dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
 				dma-names = "tx", "rx";
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 22>,
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>,
 					 <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>;
 				clock-names = "fck", "ahclkx";
 				status = "disabled";
@@ -2856,9 +2854,8 @@
 					<SYSC_IDLE_SMART>;
 			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
 			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 28>;
-			clock-names = "fck", "ahclkx", "ahclkr";
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x70000 0x2000>,
@@ -2874,7 +2871,7 @@
 				interrupt-names = "tx", "rx";
 				dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
 				dma-names = "tx", "rx";
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 22>,
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>,
 					 <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>;
 				clock-names = "fck", "ahclkx";
 				status = "disabled";
@@ -2891,9 +2888,8 @@
 					<SYSC_IDLE_SMART>;
 			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
 			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 28>;
-			clock-names = "fck", "ahclkx", "ahclkr";
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x74000 0x2000>,
@@ -2909,7 +2905,7 @@
 				interrupt-names = "tx", "rx";
 				dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
 				dma-names = "tx", "rx";
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 22>,
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>,
 					 <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>;
 				clock-names = "fck", "ahclkx";
 				status = "disabled";
@@ -2926,9 +2922,8 @@
 					<SYSC_IDLE_SMART>;
 			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
 			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 28>;
-			clock-names = "fck", "ahclkx", "ahclkr";
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x78000 0x2000>,
@@ -2944,7 +2939,7 @@
 				interrupt-names = "tx", "rx";
 				dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
 				dma-names = "tx", "rx";
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 22>,
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>,
 					 <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>;
 				clock-names = "fck", "ahclkx";
 				status = "disabled";
@@ -2961,9 +2956,8 @@
 					<SYSC_IDLE_SMART>;
 			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
 			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 28>;
-			clock-names = "fck", "ahclkx", "ahclkr";
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x7c000 0x2000>,
@@ -2979,7 +2973,7 @@
 				interrupt-names = "tx", "rx";
 				dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
 				dma-names = "tx", "rx";
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 22>,
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>,
 					 <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>;
 				clock-names = "fck", "ahclkx";
 				status = "disabled";