Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Improving Dewulf equipment [if possible] #2972

Closed
37cee opened this issue Nov 21, 2023 · 7 comments
Closed

Improving Dewulf equipment [if possible] #2972

37cee opened this issue Nov 21, 2023 · 7 comments
Labels
enhancement New feature or request
Milestone

Comments

@37cee
Copy link

37cee commented Nov 21, 2023

First of all, i love your work. I am very grateful for the time you invest in this without this mod i would care much less about FS as i do.

I am aware you might have run into this and you might be working on this. This is my feedback of the function of Courseplay (CP) + Autodrive (AD) in combination with the Harvesters, that are part of the "premium" DLC. And yes iknow, that you can't change anything, when AD is the culprit.

General note: Consider this more of a Feedback, what i ran into using the new Premium DLC. All harvesters had their working width and offset adjusted , the generated course was "spiral & no headlands"

Dewulf P3CL Profi & GCCI
Both work up to the unloading.

  • I don't think those are worth touching, But in theory it might be possible, to make CP unload and automatically buy boxes.

Dewulf P3K Profi & GKIIS
CP knows how they work, once the tool distances are set up correctly. The default position of the pipes are not ideal, especially on the P3K. When used in combination with an AD, the Unloader does not drive up far enough to toggle the unloading. (Maybe this is due to the default pipe positions, but it did not look like that on the GKIIS).

  • I assume there is nothing you can do about this, but i don't know enough about the interaction between both mobs.

Dewulf GBC
The harvesting itself works, after width and offset are corrected. But there are 2 problems i ran into, which might be adjusted on the CP side.

  1. AD approaches the harvester at ~85% fill level. Once the Unloader is close CP raises the bunker to the unload position, but does not stop. CP continues driving and lowers the Bunker again, once AD stops, the bunker is lowered again and the veggies are harvested, again.
  • here i would like to see, that CP either refuses to raise the bunker until it is at 100% or that CP stops once the bunker gets raised.
  1. Once the harvester is at 100% fill level CP stops and raises the bunker, as intended. Once the bunker is empty, CP does not lower the bunker and remains stationary. The bunker has to be manually lowered, before CP can continue. Weirdly when CP stops before reaching 100% fill level, it seems to be able to lower the bunker after unloading (this happened like twice on a field).
  • CP should lower the bunker , after unloading

Dewulf ZKIVSE
This harvester stops early, when closing the field edge. About 2 - 3 meters of veggies remain, when it send the unloader away to engage the turn, but since it wont drive unless an unloader is close, the harvester stops. [i can work around this by removing a headland] The default "pipe" position is fairly low, which makes moste medium sized tractors not somewhat problematic. Like with the other bunkerless harvesters in the DLC, the Unloader doesn't drive up far enough, but in this case it is just enough.

  • Possibly change the turning behaviour & pipe position.
@37cee 37cee added the enhancement New feature or request label Nov 21, 2023
@Tensuko
Copy link
Contributor

Tensuko commented Nov 21, 2023

This is a rather long process but we have that on TODO.

@37cee
Copy link
Author

37cee commented Nov 22, 2023

Good to hear. Thanks for the reply.

@martin8883
Copy link

Hi,
I would ask you to enable "drop to ground" (configurable) for the harvesters without unloader near to it. It´s another type of strategy to load them afterwars from ground.
Regards
Martin

@Tensuko
Copy link
Contributor

Tensuko commented Nov 23, 2023

Wont do that.

@jozobecka
Copy link

and i have problem when pipe on Dewulf ZKIVSE is too low any fix?

@Tensuko
Copy link
Contributor

Tensuko commented Dec 6, 2023

Wait for next release.

@Tensuko
Copy link
Contributor

Tensuko commented Mar 10, 2024

ZKIVSE is now supported, however, don't use too high Trailers.
The other tools I may check at a later point if we can get them running easy, if that will be the same trouble like we had with that big Harvester, we will skip them...

@Tensuko Tensuko added this to the 7.4.1.3 milestone Apr 28, 2024
@Tensuko Tensuko closed this as completed Apr 29, 2024
Tensuko added a commit that referenced this issue Jun 9, 2024
- Towed dewulff harvester, that constantly need an unloader, are now calling an unloader. (last improvement for #2972 )
- Hawe SUW 5000 is now working correctly as an overloader wagon. #3198
- Bale collecting use the same return to target before hand over to AD like combine unloader. #3247
- Pathfinder improvements and fixes for #3242
- Fix for #3265
- Fix for #3273
- Shovel position is slightly tilted down and finer hight adjustment (0.05 steps). This should help with some silage silos are not getting empty.

Known Issue:
Job selecting is still bugged in MP ( #3233 ) and will get a new Release as soon as we have a fix for it.
We just don't want you to wait longer for the other fixes so we push this one for now.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
enhancement New feature or request
Projects
None yet
Development

No branches or pull requests

4 participants