The Automated Door Opening System is a major project created in both Java and Arduino for a first year Engineering course. This project is an iteration of my MATLAB version of this project.
This version interfaces between Arduino and Java and uses JavaFX to create an interactive GUI operating with the physical system.
In my first year 'Computational Thinking through Mechatronics' course, the class was tasked with creating any project we liked as long as it hard a physical hardware component (Arduino) and it was programmed using MATLAB.
During the time, COVID was near its peak during the second wave which inspired me to create some sort of system (or prototype of a system) that could help a group of people affected by the current impacts of the virus in our communities. I targeted small businesses that wouldn't be able to afford industry used door systems by coming up with a way for this system to be installed onto doors that open at 90 degrees rather than slide apart. The interactive GUI then also allows businesses to track how many people are entering their store.
While trying to stay within the scope of our assignment and time allocated to us, I decided to create prototype of a door opening system allowing users to open a door simply by waving their hand in front of it resulting in a reduced amount of germs being spread by people touching a door handle.
Having come up with this idea, I implemented other features such as:
- GUI capabilities that:
- Allow the door to be manually opened and closed
- Completely toggle the system on and off
- View a live graph of the amount of times the door has been opened
- Detecting when an object or person is blocking the door so it doesn't close on them
- Light & sound indicators that tell you the state of the system
- A 'night-mode' that disables access to the door when it becomes dark
The following is a video DEMO of the system:
The components used in this project are as follows:
An Arduino Groove BoardServo MotorPIR Motion SensorUltrasonic Sound SensorPhotoresistorPiezo BuzzerRGB LEDPush ButtonBread Board
The following is a simple system diagram of how the components are connected to each other.
The servo would be attached to a door (or place holder object acting as door) which rotates in a 90 degree motion. On the backside of the same object, the ultrasonic sensor is placed, and is used to check if an object is the door's closing path. The motion sensor would be placed at the front of the door to detect motion, the LDR is placed outside of the door to detect lighting levels and other components are placed near the door (with LEDs being visible) to be connected to a breadboard that connects everything to the Arduino.
When the program is launched, the system is always checking to make sure it is day time (using the LDR). If it's night, a blue light is emitted from the RGB LED indicating that the system is off. If it's day time (bright), the rest of the system works and the RGB LED turns green to indicate that it is daytime. We then always check for an input signal from the PIR motion sensor. If there is a signal, the servo is then turned on to open a door, the RGB LED turns red and a 'chime' plays on the buzzer. After a couple of seconds the door is then rotated back using the servo along with the 'chime' played in reverse unless the ultrasonic sound sensor detects an object that is close to the backside of the door. If there is an object near the door, the servo doesn't close the door. Instead a red light begins flashing with a repeated beeping played by the buzzer (telling you something is blocking the door). If the button is pressed, everything turns off and the system is terminated.
When the program begins, a GUI app is launched on the computer.
This GUI contains two buttons at the top, a toggle system on/off button and a force open door button.
When the toggle system on/off button is pressed, the system is turned off until pressed again.
When the force door open button is pressed, the door will open just as it would when a hand motion is detected. The system must be on in order for this button to work.
Additionally, GUI window has a graph that displays a live feed of the amount of people that use the door. This allows the door owner to track how many people are entering their store (or room that uses the door) and the times at which this happens. Every time someone enters the room, the line graph moves up.
For this picture, the # of door opens was set to a max of 10 to make the graph easier to read for demonstration purposes.
This project was targeted towards local business in our community that may not have the time or money to implement an industry used door within the store. Despite not being able to physically create this implementation, I still decided to create diagrams of how this system would operate in a real word setting.
I wanted the door to be opened with a metal arm connected to a pivot attached to a servo. This would allow this system to work on businesses that already have an existing door that opens at 90 degrees.
This is how the system works when the door is opened:
Closed state
Opening state
Opened state
Here's a 3D model of the system created in TinkerCAD showing the placements of the components on the door.
These diagrams and models are simply prototypes and would have to go through many different re-evaluations to be implemented.