Skip to content

Overview of different methods to build LaTeX with GitHub Actions or Travis-CI (idea by @jackolney but completely rewritten by @PHPirates and contributors).

License

Notifications You must be signed in to change notification settings

DOzernyi/travis-ci-latex-pdf

 
 

Repository files navigation

LaTeX + Git + Travis → release pdf

Build Status Gitter

Write LaTeX, push to git, let Travis automatically build your file and release a pdf automatically to GitHub releases when the commit was tagged.

This repository contains an overview of the methods you could use to build your LaTeX on a remote server (continuous integration server). You want that because then every time you push it will automatically check if you pushed valid LaTeX.

If you are looking for instructions to build LaTeX locally, look here. If you are looking for instructions to build LaTeX on GitLab CI, have a look at the GitLab section. If you are looking for instructions to build ConTeXt, have a look at the ConTeXt section.

Quickstart

This repository contains a huge amount of information, and as you can see I have worked with a lot of different options. These are my two favourites:

Table of Contents

GitHub Actions

In 2019 GitHub introduced GitHub Actions, which is essentially an alternative to Travis.

  • GitHub Actions is integrated into GitHub so you do not have to leave GitHub to see build logs
  • GitHub Actions can also publish to GitHub releases, and upload artifacts
  • GitHub Actions also has a caching mechanism
  • GitHub Actions has a marketplace from which it is very easy to copy yaml configuration files

To use it:

  • Go the Actions tab in your repository
  • Click on Set up this workflow
  • Search in the Marketplace for LaTeX
  • Choose an action, see below for an overview.
  • Copy the yaml shown to under 'steps' in the file shown
  • Commit

For more information, see https://help.github.com/en/actions/automating-your-workflow-with-github-actions

In the following sections we will give an overview and comparison of available GitHub Actions to build LaTeX. Note however, that you can adapt any of the methods for using Travis CI to work with GitHub Actions, because the syntax for the yml configuration files is very similar.

Docker image with full TeX Live

Currently we know the following Actions.

Github Action for LaTeX by xu-cheng

Advantages:

  • You can specify file to compile, working directory, compiler, compiler arguments and extra packages to install in the alpine image used
  • Supports minted, biber, custom fonts (using local paths)

Disadvantages:

  • It downloads a full TeX Live image on every build, which takes almost three minutes

Example in this repo: xu-cheng-docker-full-texlive.yml

Build time example files: 3-4 min.

LaTeX compilation by dante-ev

This is a fork of Github Action for LaTeX by xu-cheng, of which the only changes are now also in the original Action by xu-cheng.

Latex-multicompiler by Jatus93

Fork of 'LaTeX compilation by dante-ev' but reads the file to compile from a .fileToCompile file in your repository so this does not seem to have any advantages.

Github Actions for build LaTeX and release pdf by MaineK00n

Uses https://github.com/Paperist/docker-alpine-texlive-ja which installs the TeX Live package collection-langjapanese by default and otherwise does not seem to have any advantages (or documentation at all).

Uberblatt by ottojo

debian-based Docker image with a full texlive installed using the debian package. Includes pygments and pandoc, for source see https://hub.docker.com/r/aergus/latex/dockerfile. No known advantages currently.

Docker image with Tectonic

The following Actions use Tectonic, which means they have the advantages and disadvantages of Tectonic as described below

Essentially this just executes docker run --mount src=$GITHUB_WORKSPACE/src,target=/usr/src/tex,type=bind dxjoke/tectonic-docker /bin/sh -c "tectonic main.tex" to compile main.tex in src.

Build time example file: 30s

setup-tectonic by WtfJoke

This Github Action downloads tectonic (and optionally biber) from the latest official releases. It has a significant advantage over using the Docker image directly: it supports caching of installed LaTeX packages so it is significantly faster for documents with many dependencies. For the documentation and more explanation (including one about the cache) see https://github.com/wtfjoke/setup-tectonic

Example in this repo: .github/workflows/setup-tectonic-action.yml

Build time example file: 20s

Compile LaTeX by vinay0410

Uses a fork from https://github.com/WtfJoke/tectonic-docker with no significant changes.

Advantages:

  • You can specify the path to the file to compile
  • Supports biber

Disadvantages:

  • Packages are not cached, downloading them all every time costs time
  • No way to disable the automatic upload of pdfs to the master branch (and because of that it has been commented out in this repo)

Example in this repo: vinay04010-docker-tectonic.yml

Build time example files: 4-5 min.

TeX Live

You can do basically the same as 4-texlive/.travis.yml for GitHub Actions. The workflow .github/workflows/texlive.yml contains a full example of installing a basic TeX Live installation and using texliveonfly and caching to install the rest. It also contains the steps needed to automatically release a pdf to GitHub if you tag a commit, and also shows that it is easy to extend with other programs like pythontex. The complete time the GitHub Actions needs for an empty LaTeX file is only 20 seconds.

The steps to use this are then:

paper-maker by andycasey using Ubuntu texlive packages

This actions installs a default set of texlive packages from Ubuntu, at the moment texlive-publishers texlive-latex-recommended texlive-latex-extra texlive-fonts-recommended texlive-fonts-extra.

Then it compiles using pdflatex and bibtex, using -shell-escape.

By default, you don't specify any options, but for customizations you can copy the source yaml from https://github.com/andycasey/paper-maker/blob/master/action.yml and modify it.

Advantages:

  • It is simple and might be close to what you would do on Ubuntu yourself, if you would install TeX Live from Ubuntu packages.

Disadvantages:

  • You have to specify all the packages you want manually.
  • Installing TeX Live using the Ubuntu packages is not something that is recommended, because these packages can be older.

Because it would be so much work figuring out what packages are needed, especially when TeX Live was installed using the Ubuntu packages, no example file is provided with this repository.

LaTeX linting

LaTeX linter (chktex) by j2kun

Uploading the pdf to a GitHub Release when a tag is pushed

Basically see https://github.com/actions/upload-release-asset#example-workflow---upload-a-release-asset, example in this repo in release-pdf-on-tag.yml.

Overview and comparison of methods to build LaTeX using Travis CI

Tectonic

Thanks to Dan Foreman-Mackey for writing about Tectonic. The first two methods do not use the pdflatex engine to compile, but Tectonic which is a fork of XeTeX (thanks to ShreevatsaR for pointing this out). Please leave a comment to vote for adding documentation about using Tectonic at tectonic-typesetting/tectonic#373

Important note: there have been recurring problems with the persistent urls from which the packages are downloaded, if you encounter this (e.g. 'PURL setup link has expired SSL certificate' or 'couldn't probe ...') then you can try the workaround described at tectonic-typesetting/tectonic#131 (comment)

Pro:

  • automatically loops TeX and BibTeX as needed, and only as much as needed
  • automatically downloads LaTeX packages which are needed
  • can generate an index
  • fastest build time
  • also can use biber

Con:

  • Tectonic does not support the -shell-escape flag at the moment (see tectonic/#38), which is required for example by the minted package. The pdflatex way (below) has been tested to work with the minted package.

We will quickly compare two methods to use Tectonic, after that we will discuss more conventional methods which can compile with pfdlatex, lualatex etc.

Note that since May 2018 Travis moved open source to travis-ci.com (instead of travis-ci.org). Travis is also now available as GitHub App in the Marketplace, but old repositories (like this one) are still on travis-ci.org.

1. Docker image with Tectonic

Thanks to Norbert Pozar (@rekka) for providing the original Docker image. Manuel (@WtfJoke) extended it by integrating biber. Docker provides the ability to download a pre-installed Tectonic and then run it on your LaTeX files.

Pro:

  • Tectonic is ready really fast, because downloading the image is all it takes
  • The Docker image is really small, around 75MB
  • Works with bibtex automatically
  • Can automatically deploy pdfs
  • Works with biber

Con:

  • Slower than the other methods because all packages have to be reinstalled every time

Build time example file: two minutes

Want this? Instructions below.

2. Miniconda with Tectonic

Pro:

  • It is also fast because tectonic and packages are cached
  • Can automatically deploy pdfs
  • Can work with Biber, thanks to Malcolm Ramsay who made it work.

Con:

  • Cache is bigger, although still small enough to not really be a disadvantage

Build time example file: 1-2 minutes

Want this? Instructions below.

3. Docker image with TeX Live

This method downloads a docker image which contains a small TeX Live installation. Thanks to Andreas Strauman for figuring this out, give his tex.stackexchange.com answer an upvote if you like it! At the moment it uses latexmk to compile pdfs which is configured to run pdflatex by default, but it should be easy to configure it for other tex engines.

Pro:

  • Very clean build files, only a very short .travis.yml file is needed.
  • You can specify options in your .travis.yml, for example which files to build and which packages to install.
  • You can also provide extra latexmk flags, for example -dvi to generate a dvi file.

Con:

  • Packages are (not yet) cached, so the build time is long
  • You still need to specify which packages you require to be installed (unless you use the texliveonfly image, see the instructions below)

Build time example file: 4 minutes (9 minutes when using texliveonfly)

Want this? Instructions below.

4. TeX Live with pdflatex/lualatex/latexmk/xelatex/texliveonfly/etc

Thanks to Joseph Wright who pointed out that they use something based on this setup for LaTeX3 development.

Pro:

  • Uses any compiler you want, this can be useful for example if you need pdflatex for some cases like the minted package.
  • Fast, because of caching
  • Almost all required packages are downloaded automatically
  • Tested to work with the minted package
  • Tested to work with custom fonts

Con:

  • You need to copy extra build files to each repository, besides the .travis.yml.

Build time example file: 1-2 minutes

Want this? Instructions below.

5. TeX Live and pdflatex via tinytex with R.

Thanks to Hugh for pointing out this option.

Pro:

  • Uses pdflatex
  • Automatically installs packages needed
  • Works with Biber

Con:

  • You need to specify how much times to compile
  • Build time is very long

Build time example file: 5-8 minutes

Want this? Instructions below.

Instructions for each build method

  • Install the Travis GitHub App by going to the Marketplace, scroll down, select Open Source (also when you want to use private repos) and select 'Install it for free', then 'Complete order and begin installation'.
  • Now you should be in Personal settings | Applications | Travis CI | Configure and you can allow access to repositories, either select repos or all repos.
  • Copy 1-tectonic-docker/.travis.yml and specify the right tex file in the line with docker run. If your tex file is not in the src/ folder, you also need to change the path in that line after $TRAVIS_BUILD_DIR.
  • If you want to compile multiple files, you can replace tectonic main.tex by tectonic main.tex; tectonic main2.tex.
  • If you want to use biber, you can use tectonic --keep-intermediates --reruns 0 main.tex; biber main; tectonic main.tex
  • Commit and push, you can view your repositories at travis-ci.com.
  • For deploying to GitHub releases, see the notes below.
  • Have a look at the Tips.
  • If your build doesn't start, see Troubleshooting.
  • Install the Travis GitHub App by going to the Marketplace, scroll down, select Open Source (also when you want to use private repos) and select 'Install it for free', then 'Complete order and begin installation'.
  • Now you should be in Personal settings | Applications | Travis CI | Configure and you can allow access to repositories, either select repos or all repos.
  • Copy 2-tectonic-miniconda/.travis.yml and specify the right tex file in the script section in .travis.yml. You can uncomment the makeindex line and the extra tectonic call if you want to use an index.
  • Commit and push, you can view your repositories at travis-ci.com.
  • For deploying to GitHub releases, see the notes below.
  • Have a look at the Tips.
  • If your build doesn't start, see Troubleshooting.
  • If you get the error This means that your biber (2.xx) and biblatex (3.yy) versions are incompatible that means that Tectonic has a different biblatex version than the biber version specified in the config. To fix this, open your .travis.yml and change biber==2.xx to biber==2.yy, for example if biblatex 3.11 is present then you need to install biber 2.11. This trick works for any recent version of biblatex, as can be seen in the biber docs.

These changes have already been added to the .travis.yml, but to be clear here are the separate instructions if you already have Miniconda and Tectonic running:

  • Install the correct biber version (see above) either from sourceforge, or with conda conda install -c malramsay biber==2.xx
  • Run tectonic once to create intermediate files, followed by biber, and finally complete compilation of the document with tectonic.
tectonic --keep-intermediates --reruns 0 ./main.tex
biber main
tectonic ./main.tex
  • Following this project, Malcolm Ramsay has a great blog post documenting this use case in a very complete way.
  • Install the Travis GitHub App by going to the Marketplace, scroll down, select Open Source (also when you want to use private repos) and select 'Install it for free', then 'Complete order and begin installation'.
  • Now you should be in Personal settings | Applications | Travis CI | Configure and you can allow access to repositories, either select repos or all repos.
  • Copy 3-texlive-docker/.travis.yml and specify which tex files you want to build in the build-pattern option.
  • Add all the required LaTeX packages to the packages option, by checking at https://www.ctan.org/pkg/some-package to see in which TeX Live package it is contained (which may be different than the LaTeX package name). Alternatively, use the texliveonfly images as below.
  • Commit and push, you can view your repositories at travis-ci.com.
  • For deploying to GitHub releases, see the notes below.
  • Have a look at the Tips.
  • If your build doesn't start, see Troubleshooting.

You can also use a docker image which uses texliveonfly, it is based on the above-mentioned docker image. It is somewhat experimental in the sense that sometimes texliveonfly seems to hang (for longer than 10 mins), although usually it seems to work fine. Texliveonfly calls pdflatex by default, but you can change this and more options in arguments. Some documentation can be found at https://tex.stackexchange.com/a/463842/98850 which also includes a little list of packages which texliveonfly does not download.

The only change in the instructions is that you use the docker image as specified in texlive-docker-texliveonfly/.travis.yml, and that you don't need to specify packages manually in that file.

The docker source file of this image can be found in https://github.com/Strauman/travis-latexbuild/tree/master/docker/texliveonfly

Github Package Registry

Instead of downloading from Docker Hub, you can also download the image from the Github Package Registry. You can see it at https://github.com/Strauman/travis-latexbuild/packages/92067?version=texliveonfly-2019

This requires you to upload your username and a github token as Travis environment variables.

Just replace the script: block with

script:
  - docker login -u $GH_REGISTRY_USERNAME -p $GH_REGISTRY_TOKEN docker.pkg.github.com
  - docker run --mount src=$TRAVIS_BUILD_DIR/,target=/repo,type=bind docker.pkg.github.com/strauman/travis-latexbuild/texlive-latexbuild:texliveonfly-2019

If for some reason you prefer the pdflatex (or any other) engine with the TeX Live distribution, read on. This is based on the LaTeX3 build file.

This method installs an almost minimal TeX Live installation on Travis, and compiles with pdflatex. This repo contains:

  • The TeX Live install script texlive_install.sh including profile texlive/texlive.profile (specifies for example the TeX Live scheme)
  • A Travis configuration file
  • Demonstration LaTeX files in src/

Instructions

  • Install the Travis GitHub App by going to the Marketplace, scroll down, select Open Source (also when you want to use private repos) and select 'Install it for free', then 'Complete order and begin installation'.

  • Now you should be in Personal settings | Applications | Travis CI | Configure and you can allow access to repositories, either select repos or all repos.

  • Copy the files in the folder 4-texlive to your repo, so .travis.yml and the texlive/ folder.

  • Specify the right tex file in the .travis.yml under the script section. Possibly you also need to change the folder in before_script if not using src/.

  • Commit and push, you can view your repositories at travis-ci.com. (Thanks to @jason-neal for improving this)

  • For deploying to GitHub releases, see the notes below.

  • If the build fails because some package is missing you have to add it manually in texlive_packages. This configuration uses the texliveonfly package which tries to download missing packages but sometimes the error message is non-standard and that fails.

    In that case, put the package you want to install in texlive/texlive_packages, by checking at https://www.ctan.org/pkg/some-package to see in which TeX Live package it is contained (which may be different than the LaTeX package name). If you find a package which is not automatically downloaded, it would be great if you could let us know by submitting an issue.

    You can find required LaTeX packages of your document (say main.tex) by installing the snapshot package and then running pdflatex -draftmode -interaction=batchmode "\RequirePackage{snapshot}\input{main}" (thanks to Pablo Gonzalez for finding this). This will produce a file snapshot.dep with dependencies. Note this requires that you have all required packages installed on your system.

  • If you use custom fonts, read on.

  • Tip from gvacaliuc: In order to maintain the install scripts in a central repo and link to them, you could also just copy .travis.yml and replace

install:
 - source ./texlive/texlive_install.sh

with

install:
  - mkdir ./texlive/
  - 4-texlive
  - 4-texlive
  - 4-texlive
  - source ./texlive/texlive_install.sh
  • Preferably you fork this repo so you can maintain your own build files with the right packages.

Note that sometimes tlmgr selects a broken mirror to download TeX Live from, so you get an error like Output was gpg: verify signatures failed: eof. Restarting the build will probably fix this, it will auto-select a different mirror. (Thanks to @jason-neal for testing this.)

You can also read a nice blog post by Jeremy Grifski (@jrg94) about using the setup from this repo including the minted package at https://therenegadecoder.com/code/how-to-build-latex-with-travis-ci-and-minted/

In order to enable Travis to use custom fonts, i.e. those fonts not provided by Ubuntu or TeX Live packages, it is probably easiest to push them with git. An example is in this repo, with the file src/fonts.tex and the fonts in src/fonts. You can do the following to use them on Travis:

  • Make sure you have the fonts pushed to you GitHub repository
  • Make sure that your texlive_packages file contains the packages collection-fontsrecommended and luaotfload
  • If you are starting from scratch, you can adapt 4-texlive/fonts-travis-yml/.travis.yml. If you want to change your current .travis.yml, do the following:
    • In the .travis.yml, uncomment the following lines (make sure to change src/fonts to your own path if it is different)
    before_install:
      - mkdir $HOME/.fonts
      - cp -a $TRAVIS_BUILD_DIR/src/fonts/. $HOME/.fonts/
      - fc-cache -f -v
    • Make sure to compile with lualatex or xelatex, for example if you previously had texliveonfly main.tex and latexmk -pdf main.tex in your .travis.yml, then change them to texliveonfly main.tex --compiler=lualatex and latexmk -pdflua main.tex.
    • Install the Travis GitHub App by going to the Marketplace, scroll down, select Open Source (also when you want to use private repos) and select 'Install it for free', then 'Complete order and begin installation'.
    • Now you should be in Personal settings | Applications | Travis CI | Configure and you can allow access to repositories, either select repos or all repos.
  • Copy the files in the folder 5-tinytex to your repo, so .travis.yml and install_texlive.R.
  • Specify the right tex file in .travis.yml.
  • Commit and push, you can view your repositories at travis-ci.com.
  • For deploying to GitHub releases, see the notes below.
  • Have a look at the Tips.
  • If your build doesn't start, see Troubleshooting.

First time setup

We will add a configuration to the .travis.yml such that a pdf will be automatically uploaded to GitHub releases when you tag a commit, also see the Travis documentation.

  • We will generate a GitHub OAuth key so Travis can push to your releases, with the important difference (compared to just gettting it via GitHub settings) that it's encryped so you can push it safely.
  • (Windows) Download ruby and at at end of the installation make sure to install MSYS including development kit.
  • Run gem install travis --no-document to install the Travis Command-line Tool.

For every new project

  • Go to the directory of your repository, open the command prompt (Windows: SHIFT+F10 W ENTER) and run travis login --pro --github-token mytoken where mytoken is a token from https://github.com/settings/tokens (or leave the --github-token flag out if you want to use your password).
  • Run travis setup releases --pro and leave File to Upload empty.
  • Replace everything below your encryped api key with (changing the path to your pdf file, probably the same folder as your tex file is in)
  file: 
  - ./src/nameofmytexfile.pdf
  - ./otherfile.pdf
  skip_cleanup: true
  on:
    tags: true
    branch: master
  • Commit and push.
  • If you are ready to release, just tag and push.
  • You can tell Travis to skip the build for a certain commit by prefixing the commit message with [ci skip].
  • If you want the badge in your readme, just copy the code below to your readme and change the links.

Markdown:

[![Build Status](https://api.travis-ci.com/username/reponame.svg)](https://travis-ci.com/username/reponame)

reStructuredText:

.. image:: https://travis-ci.com/username/reponame.svg?branch=master
    :target: https://travis-ci.com/username/reponame
    :alt: Build Status
  • You may want to edit settings on Travis to not build both on pull request and branch updates, and cancel running jobs if new ones are pushed.
  • You can automatically add a footnote, tag and/or git hash to the document by adding the following lines to your .travis.yml:
before_install:
  - chmod +x .travis/git-info-2.sh
  - ".travis/git-info-2.sh"

Also copy the .travis/git-info-2.sh to your repository. Then in your LaTeX file add \usepackage{gitinfo2}.

Now you can for example get the hash of the commit with \gitHash. An example can be found in src/git-info-2-mwe.tex. For more info, see the documentation at http://mirrors.ctan.org/macros/latex/contrib/gitinfo2/gitinfo2.pdf (Thanks to @shabbychef for mentioning this)

  • When trying to fix your .travis.yml, it may be helpful to trigger custom builds instead of creating a new commit every time, as explained in https://blog.travis-ci.com/2017-08-24-trigger-custom-build

  • If your build doesn't start you should first look at Travis (so on https://travis-ci.com/username/reponame) under More Options | Requests, it might for example be that the .travis.yml could not be parsed, for example because your indentation is wrong. You can also manually trigger a build there.

  • If you do not understand why your build is failing, it may help to run the relevant commands on a local Ubuntu system, if you have one.

Notes

  • There are much more CI services than just Travis, for example CircleCI or SemaphoreCI and much more. If you manage to use one of them, it would be great if you could report back!

I also put some of these instructions on the TeX Stackexchange.

Some original thoughts from harshjv's blog, and thanks to jackolney for all his attempts to put it into practice. Also see harshjv's original blog post.

Contributing

If you want to add/update a method to build LaTeX, look in the contributing guidelines.

At the moment, only the Texlive method explained above was tested in GitLab for this repo. The instructions are similar but with of course a different configuration file, which can be found in gitlab/texlive for now. This still has to be moved to GitLab. The only disadvantage is that the caching of TeX Live does not work, because it is not installed in the project, but artifacts have to be in the project directory for GitLab. The build time for the example file is around four minutes.

A more extensive overview of configurations for GitLab CI will come in the future, either in this or an other repo. Please contribute if you can help with this! Some links to get started:

https://tex.stackexchange.com/questions/459484/compiling-latex-files-automatically-with-gitlab-ci

https://www.vipinajayakumar.com/continuous-integration-of-latex-projects-with-gitlab-pages.html

https://sayantangkhan.github.io/latex-gitlab-ci.html

https://tex.stackexchange.com/questions/412740/gitlab-ci-runner-with-relative-paths-in-main-tex

https://tex.stackexchange.com/questions/437553/gitlab-ci-using-miktex-docker-image

Following a TeX Stackexchange answer from the TeXnician and the official docs at https://wiki.contextgarden.net/ConTeXt_Standalone#Single_user_installation it is not too difficult to install ConTeXt (and cache the installation).

As an alternative, you could use a Docker image, for example one from https://gitlab.com/islandoftex/images/context

In this repository there is an example for Github Actions, see .github/workflows/context.yml, but it should be easy to extend to other build systems as well.

Usage of the Github Action

  • Copy .github/workflows/context.yml to your repository in .github/workflows
  • Adjust the path to your tex file and possibly other things you want customized
  • Commit and push
  • On GitHub, check the Actions tab

This actions caches the ConTeXt installation. Build time example file: around 30-40 sec.

About

Overview of different methods to build LaTeX with GitHub Actions or Travis-CI (idea by @jackolney but completely rewritten by @PHPirates and contributors).

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • TeX 73.0%
  • Shell 24.3%
  • R 2.4%
  • Batchfile 0.3%