The server side of the wireless doorbell project (raspberry running a tcp node server)
See also http://github.com/Rubinat/doorbell for documentation.
GET: http://bel.vcxl.nl:8081/api/v1/status
POST: http://bel.vcxl.nl:8081/api/v1/ring/F1.19
(values retrieved by following these steps)
sudo nano /etc/network/interfaces
......
iface eth0 inet static
address 217.149.135.9
netmask 255.255.255.192
network 217.149.135.0
gateway 217.149.135.62
broadcast 217.149.135.63
dns-nameservers 8.8.8.8 8.8.4.4
.......
sudo reboot
At the time of writing there is an open pull request for gpio-admin by VipSaran which solves a filepath issue to the gpio folders. I added VipSaran's fork as a submodule to our repository. So clone our repository recursively or use git submodule update --init. Make sure to make and sudo make install the gpio-project. Then run our initports.sh script to initialize the gpio pins.
Make a symbolic link to bell.sh
sudo ln -s ~/RaspberryDoorbell/bell.sh /etc/init.d/bellThen run sudo update-rc.d bell defaults (as described here)
the layout is now part of the source code in nodeServer.js
| Unit | row-col | Unit | row-col | Unit | row-col | Unit | row-col |
|---|---|---|---|---|---|---|---|
| VCXL | 0-0 | D1.2 | 1-0 | E1.5 | 2-0 | F1.18 | 3-0 |
| C1.2 | 0-1 | D1.3 | 1-1 | E2.1 | 2-1 | F1.19 | 3-1 |
| C1.3 | 0-2 | D1.4 | 1-2 | E2.2 | 2-2 | G1.11 | 3-2 |
| C1.4 | 0-3 | D2.1 | 1-3 | E2.3 | 2-3 | G1.11a | 3-3 |
| C1.5 | 0-4 | D2.2 | 1-4 | E2.4 | 2-4 | G1.14 | 3-4 |
| C1.6 | 0-5 | D2.3 | 1-5 | E2.5 | 2-5 | G1.15 | 3-5 |
| C2.1 | 0-6 | D2.4 | 1-6 | F1.4 | 2-6 | G1.16 | 3-6 |
| C2.2 | 0-7 | E1.1 | 1-7 | F1.5 | 2-7 | G1.18 | 3-7 |
| C2.3 | 0-8 | E1.2 | 1-8 | F1.10 | 2-8 | G2.4 | 3-8 |
| C2.4 | 0-9 | E1.3 | 1-9 | F1.11 | 2-9 | G2.5 | 3-9 |
| C2.5 | 0-10 | E1.4 | 1-10 | F1.17 | 2-10 |