Home Assistant Add-on

ha-hoymiles-wifi-addon/CHANGELOG.md

@@ -0,0 +1,8 @@
+# Changelog
+
+All notable changes to this project will be documented in this file.
+
+The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/).
+
+## [v0.1]
+Initial release

ha-hoymiles-wifi-addon/Dockerfile

@@ -0,0 +1,16 @@
+ARG BUILD_FROM
+
+# Use pre-built image to copy the binary from
+FROM dennisosrm/hms-mqtt-publisher:v0.1 AS builder
+
+FROM $BUILD_FROM
+
+# Copy the compiled binary from the builder stage
+COPY --from=builder /usr/local/bin/hms-mqtt-publish /usr/local/bin/hms-mqtt-publish
+
+# Copy the run script into the container
+COPY run.sh /run.sh
+RUN chmod a+x /run.sh
+
+# When the container starts, run the script
+CMD [ "/run.sh" ]

ha-hoymiles-wifi-addon/README.md

@@ -0,0 +1,31 @@
+# Home Assistant Add-on
+
+This tool can directly run inside Home Assistant OS as an addon. To get started, add the URL of this repository to the add-on store in Home Assistant and install the add-on. Alternatively, you can also run it stand-alone on any machine that supports rust or docker (see section below).
+
+## Configuration
+
+To set up the add-on, fill in the following configuration parameters:
+
+- `inverter_host`: The hostname or IP address of your inverter.
+- `mqtt_broker_host`: The hostname or IP address of your MQTT broker.
+- `mqtt_username`: The username for your MQTT broker.
+- `mqtt_password`: The password for your MQTT broker. Keep this secret!
+- `mqtt_port`: The port of your MQTT broker (default is 1883 for unencrypted MQTT).
+
+## Example configuration
+
+```yaml
+inverter_host: "192.168.1.100"
+mqtt_broker_host: "core-mosquitto"
+mqtt_username: "yourusername"
+mqtt_password: "yourpassword"
+mqtt_port: 1883
+```
+
+## Note of caution
+Please note: The tool does not come with any guarantees and if by chance you fry your inverter with a funny series of bits, you are on your own. That being said, no inverters have been harmed during development. 
+
+## Known limitations
+- One can only fetch updates approximately twice per minute. The inverter firmware seems to implement a mandatory wait period of a little more than 30 seconds. If one makes a request within 30 seconds of the previous one, then the inverter will reply with the previous reading and restart the countdown. It will also not send updated values to S-Miles Cloud if this happens. 
+- The tools was developed for (and with an) HMS-800W-T2. It may work with the other inverters from the series, but is untested at the time of writing
+

ha-hoymiles-wifi-addon/build.yaml

@@ -0,0 +1,5 @@
+---
+build_from:
+  aarch64: ghcr.io/hassio-addons/debian-base:7.2.0
+  amd64: ghcr.io/hassio-addons/debian-base:7.2.0
+  armv7: ghcr.io/hassio-addons/debian-base:7.2.0

ha-hoymiles-wifi-addon/config.yaml

@@ -0,0 +1,25 @@
+---
+name: Hoymiles HMS Wifi Addon
+version: '0.1'
+slug: ha-hoymiles-wifi-addon
+description: Publishes telemetry information from Hoymiles HMS-XXXXW-T2 micro-inverters to your home assistant MQTT broker
+url: https://github.com/dominikandreas/hms-mqtt-publisher/tree/master/ha-hoymiles-wifi-addon
+init: false
+arch:                              # List of supported architectures.
+  - armv7
+  - aarch64
+  - amd64
+startup: application              # When the add-on should start.
+boot: auto                        # Boot options, auto or manual.
+options:                          # Default options value for the add-on.
+  inverter_host: ''
+  mqtt_broker_host: ''
+  mqtt_username: ''
+  mqtt_password: ''
+  mqtt_port: 1883
+schema:                            # Schema validation for the options.
+  inverter_host: str
+  mqtt_broker_host: str
+  mqtt_username: str
+  mqtt_password: str
+  mqtt_port: int

ha-hoymiles-wifi-addon/run.sh

@@ -0,0 +1,36 @@
+#!/usr/bin/with-contenv bashio
+
+# Enable strict mode for bash (exit on error, error on undefined variable, error if any pipeline element fails)
+set -euo pipefail
+
+# Fetch values from the add-on configuration by extracting it from /data/options.json
+INVERTER_HOST=$(bashio::config 'inverter_host')
+MQTT_BROKER_HOST=$(bashio::config 'mqtt_broker_host')
+MQTT_USERNAME=$(bashio::config 'mqtt_username')
+MQTT_PASSWORD=$(bashio::config 'mqtt_password')
+MQTT_PORT=$(bashio::config 'mqtt_port')
+
+
+# Check if the required configs are provided
+if [[ -z "$INVERTER_HOST" ]]; then
+  echo "The inverter_host is not configured."
+  exit 1
+fi
+
+if [[ -z "$MQTT_BROKER_HOST" ]]; then
+  echo "The mqtt_broker_host is not configured."
+  exit 1
+fi
+
+if [[ -z "$MQTT_USERNAME" ]]; then
+  echo "The mqtt_username is not configured."
+  exit 1
+fi
+
+if [[ -z "$MQTT_PASSWORD" ]]; then
+  echo "The mqtt_password is not configured."
+  exit 1
+fi
+
+# Execute the application with the configuration
+/usr/local/bin/hms-mqtt-publish "$INVERTER_HOST" "$MQTT_BROKER_HOST" "$MQTT_USERNAME" "$MQTT_PASSWORD" "$MQTT_PORT"

repository.json

@@ -0,0 +1,5 @@
+{
+    "name": "HA Hoymiles Wifi Addon",
+    "url": "https://github.com/dominikandreas/hms-mqtt-publisher",
+    "maintainer": "Dominik Andreas <13525040+dominikandreas@users.noreply.github.com>"
+}