Candle windows 11

[denhoy81]

Does Candle work on windows 11?

[mar0x]

Yes, it does.

[lrafuse1005]

i am having a terrible time making this work i think i have tried everything but i am new to this it starts, mills for a minute then stops works longer everytime but never in the same spot

HELP!

[mar0x]

Hello,
To advise anything useful it would be good to know the details about your CNC (model, firmware, etc).

For now, I guess you are running Windows 11. One of the possible reason of the behavior you have described is unreliable CNC control board power or USB connection.

[lrafuse1005]

Thank you for replying! I have a vevor 3018 prover Sent from my iPhone On Oct 16, 2023, at 3:39 AM, Max ***@***.***> wrote:  Hello, To advise anything useful it would be good to know the details about your CNC (model, firmware, etc). For now, I guess you are running Windows 11. One of the possible reason of the behavior you have described is unreliable CNC control board power or USB connection. — Reply to this email directly, view it on GitHub<#545 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BDJI5Y3LIGWDYNGT4HBVIADX7TQDRAVCNFSM5STJGRH2U5DIOJSWCZC7NNSXTN2JONZXKZKDN5WW2ZLOOQ5TCNZWGM4TAMJXG43A>. You are receiving this because you commented.Message ID: ***@***.***>

[lrafuse1005]

I read some more into some possible issues and decreased the windows running system to run windows eight for this particular product. It states it can run at 11, 10… But I am having trouble with issues that it is stopping. I will try this morning and see how it runs on windows eight and, let you know how I do. Thank you so much for your quick reply. I honestly didn’t know if anyone would reply since this thread is so outdated. Sent from my iPhone On Oct 17, 2023, at 6:53 AM, Lisa Rafuse ***@***.***> wrote:  Thank you for replying! I have a vevor 3018 prover Sent from my iPhone On Oct 16, 2023, at 3:39 AM, Max ***@***.***> wrote:  Hello, To advise anything useful it would be good to know the details about your CNC (model, firmware, etc). For now, I guess you are running Windows 11. One of the possible reason of the behavior you have described is unreliable CNC control board power or USB connection. — Reply to this email directly, view it on GitHub<#545 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BDJI5Y3LIGWDYNGT4HBVIADX7TQDRAVCNFSM5STJGRH2U5DIOJSWCZC7NNSXTN2JONZXKZKDN5WW2ZLOOQ5TCNZWGM4TAMJXG43A>. You are receiving this because you commented.Message ID: ***@***.***>