Skip to content
8b762bb
Compare
Choose a tag to compare
Add: Protect burn address to send any coins
patch: Compilation *_config.pri file with better structured paths.
patch: translation compilation.
69775b1
Compare
Choose a tag to compare
  • THIS IS A MANDATORY UPDATE THAT REQUIRES A WALLET RESYNC!!!
  • Version Bump
  • Security Fix to rectify exploit
  • New baseline version (lower versions will not connect prior to the 2.0.0.4 release)

NOTE: Any wallet below v2.0.0.4 will no longer work.

INSTRUCTIONS:

Download the new DigitalNote XDN wallet 2.0.0.4 and install.

Rename your current XDN folder to XDN10 for instance and then create a new blank XDN folder. All these files are located in:

Windows - ~/appdata/Roaming/XDN
Apple Mac - ~/Library/ApplicationSupport/XDN

Create a new XDN folder in the above locations.

Download the bootstrap attached (423486.zip) to load the latest blockchain. This will help you sync with the blockchain quickly.

Extract these bootstrapped files to the new XDN folder you created in step 3.

VERY IMPORTANT -->> copy your wallet.dat DigitalNote.conf and masternode.conf (if it exists) from the XDN10 folder to the new XDN folder and start wallet.

You may need to add the following nodes to your DigitalNote.conf file if you do not get connections to peers within about 10-15 minutes.

addnode=192.241.147.56
addnode=20.193.89.74
addnode=161.97.92.102
addnode=62.171.150.246:18062
addnode=62.171.150.246:18064
addnode=161.97.106.85:18060
addnode=161.97.106.85:18061
addnode=161.97.106.85:18062
addnode=161.97.106.85:18063
addnode=62.171.150.246:18093
addnode=62.171.150.246:18066
addnode=62.171.150.246:18068
addnode=62.171.150.246:18070
addnode=62.171.150.246:18072
97d6a5b
Compare
Choose a tag to compare
Pre-release

Fix: CreateNewBlock for miners and stakers.
Fix: daemon compilation suppress translation warning.

IMPORTANT: This update is only needed for miners and stakers.

e34ff8e
Compare
Choose a tag to compare
0bdf157
Compare
Choose a tag to compare
  • THIS IS A MANDATORY UPDATE THAT REQUIRES A WALLET RESYNC!!!
  • Version Bump
  • Security Fix
  • Complete Code Reorg and cleanup
  • PoW/PoS and Masternode Reward switch
  • Devops address update
  • New baseline version (lower versions will not connect prior to the 1.0.4.2 pre-release)

NOTE: Any wallet below v1.0.4.2 will no longer work.

INSTRUCTIONS:

Download the new DigitalNote XDN wallet 2.0.0.1 and install.

Rename your current XDN folder to XDN10 for instance and then create a new blank XDN folder. All these files are located in:

Windows - ~/appdata/Roaming/XDN
Apple Mac - ~/Library/ApplicationSupport/XDN

Create a new XDN folder in the above locations.

Download the bootstrap attached (403438.zip) to load the latest blockchain. This will help you sync with the blockchain quickly.

Extract these bootstrapped files to the new XDN folder you created in step 3.

VERY IMPORTANT -->> copy your wallet.dat DigitalNote.conf and masternode.conf (if it exists) from the XDN10 folder to the new XDN folder and start wallet.

You may need to add the following nodes to your DigitalNote.conf file if you do not get connections to peers within about 10-15 minutes.

addnode=192.241.147.56
addnode=20.193.89.74
addnode=161.97.92.102
addnode=62.171.150.246:18062
addnode=62.171.150.246:18064
addnode=161.97.106.85:18060
addnode=161.97.106.85:18061
addnode=161.97.106.85:18062
addnode=161.97.106.85:18063
addnode=62.171.150.246:18093
addnode=62.171.150.246:18066
addnode=62.171.150.246:18068
addnode=62.171.150.246:18070
addnode=62.171.150.246:18072
16f6906
Compare
Choose a tag to compare
  • THIS IS A MANDATORY UPDATE THAT REQUIRES A WALLET RESYNC!!!
  • Version Bump
  • Security Fix
  • Addition of Depth Block Scan during Block Validation

NOTE: Any wallet below v1.03.8 will no longer work.

INSTRUCTIONS:

  1. Download the new DigitalNote XDN wallet 1.0.3.9 and install.
  2. Rename your current XDN folder to XDN10 for instance and then create a new blank XDN folder. All these files are located in:
    Windows - ~/appdata/Roaming/XDN
    Apple Mac - ~/Library/ApplicationSupport/XDN
  3. Create a new XDN folder in the above locations.
  4. Download the bootstrap to load the latest blockchain. This will help you sync with the blockchain quickly.
    Bootstrap file: https://mega.nz/file/8x5mUbLA#4D7-TU1yQMNQfhPOt9VzwsYnuBUGtBRWWPfvMY1b0hY
  5. Extract these bootstrapped files to the new XDN folder you created in stpe 3.
  6. VERY IMPORTANT -->> copy your wallet.dat DigitalNote.conf masternode.conf (if it exists)
    from the XDN10 folder to the new XDN folder and start wallet.

You may need to add the following nodes to your DigitalNote.conf file if you do not get connections to peers within about 10-15 minutes.

addnode=142.93.201.211:18092
addnode=192.241.147.56:18092
addnode=134.209.55.249:18094
addnode=95.111.225.123:18092
Compare
Choose a tag to compare
  • Version Bump

  • Stability Improvements

  • Revert Masternode Updates until full rewrite

  • Cleanup of functions not required after Superblock

  • Build updates for win32 and macOS

  • DigitalNote-v1.0.3.8-Catalina.dmg will run on Catalina and Big Sur on the Intel Chips. M1 has not been tested. When the file downloads you may get a warning to discard the file or keep it. Select "keep" If the Mac says it cannot run the program click "cancel" and go to Settings>Security & Privacy >General> Allow anyway > then click open in the dialogue box.

For new users of the wallet, download the bootstrap to load the latest blockchain. This will help you sync with the blockchain quickly.

NOTE: Please rename your current XDN folder to XDN10 for instance and then create a new blank XDN folder. Extract these bootstrapped files to the new XDN folder. VERY IMPORTANT -->> copy your wallet.dat file from the XDN10 folder to this folder and start wallet. All these files are located in:
Windows - ~/appdata/Roaming/XDN
Apple - ~/Library/ApplicationSupport/XDN

Bootstrap file: https://mega.nz/file/E9ARxK5S#7Xfpc6piL29R5kIL6ZTaxAnBSNrN1opRUKYcQxet9-o

27ec8d1
Compare
Choose a tag to compare
0cab1d7
Compare
Choose a tag to compare

Changelog

  • Version bump
  • Added SuperBlock Registration
  • Added Masternodes messages relay
  • Changed Masternode winner decision logic
  • Added Websocket for communication with the web-wallet server
  • Fixed random crashes related to secure messaging
  • Fixed id generation of secure messaging
  • Removed "Socks" proxy handling from source (uneeded)
  • Fixed getrawtransaction json syntax
  • Updated Nodes
  • Fixed Mac based build issues and dependencies
  • Updated win32 build process
  • Fixed win32 related compile errors
  • Minor Code Updates to support QT 5.15.1
fcb5a4a
Compare
Choose a tag to compare
Pre-release

Changelog

  • Updated images with new official logos
  • Updated GUI colors to match new logo
  • Removed "Socks" proxy handling from source (uneeded)
  • Corrected previous messaging issues (relay problems)
  • Fixed messaging back button issues (linking)
  • Updated checkpoints
  • Updated secure messaging system
  • Added "copy smsinfo" button for ease of use for GUI users (copies sms data to send to the person you wish to message with)
  • Updated ssl and boost library handling/support
  • Fixed Mac based build issues and dependencies