A small mod board for the GDP Pocket to add a tiny internal USB hub for various purposes.
| Reference | Description | Part Number |
|---|---|---|
| U1 | 4-port USB 2.0 Hub IC | CY7C65632-28LTXC |
| Y1 | 12MHz Crystal | ABM10-166-12.000MHZ-T3 |
| R4 | 649 resistor (0603, 1%) | (generic) |
| R1,R3 | 10k resistor (0603, 1%) | (generic) |
| R2 | 47k resistor (0603, 1%) | (generic) |
| C3,C4 | 7pF capacitor (0603, 50V, NP0) | CGA3E2NP01H070D080AA |
| C5 | 1uF capacitor (0603, 25V, X7R) | CL10B105KA8NNNC |
| C1,C2 | 10uF capacitor (0805, 6.3V, X5R, low profile) | CL21A106MQCLNNC |
| P1,P2 | Flat Flex Connector | FH19C-10S-0.5SH |
| 10pos 0.5mm pitch 4cm Flex Cable | 152660095 | |
| PCB (16mm x 13mm x 0.4mm) |
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
