Skip to content

How to Use

Jump to bottom
Doc-1 edited this page Jul 5, 2019 · 2 revisions
  • Yellow - This where you enter either a file directory such as C:/Users/Doc/Documents/photo.png. Or a URL to a photo from a photo sharing site such as Imgur, imgbb, discord, ect. The URL should end with a .png or other photo file extension. In the config file, you can disable print from URL.
  • Green - By default, it is set to print from a file's path. While on this setting you cannot print from a URL. If you are set to print from a URL you cannot print from a file's path.
  • Red - "Paste" is the same as ctrl+v or right click and paste. It will paste whatever you have copied in your clipboard. "Print" will convert the image to a Little Tile structure as long as an advanced recipe is inside the Inventory Slot highlighted in blue.
  • Blue - This is where the photo with be printed to. An advanced recipe is required to be placed in it to work unless you are in creative.
  • Brown - This is the size of the tiles that will print in as.
  • Purple - By default, you can only print an image that is 96x96 pixels large. In the config file, you can change the maximum amount it can print. But be careful, for anything larger than 96x98 will take much longer to compile. X and Y are the new dimensions of the photo if you enter a number larger then the limit it will not print. It will only apply the new size if you check "Resize Image".
  • Cyan - This will take you to the Block printing GUI.

The block printing GUI is the same as the photo printing GUI except for:

  • Red - This is which face of the block to print from. In some cases, there are several blocks that have more than one face such as grass, logs, furnace.

  • Blue - This is where you choose the block to print from.

  • Crafting Recipe:

Clone this wiki locally