The Micro Node is a low cost wireless Arduino IDE compatible (the Atmel ATMega328P 8MHz) microcontroller with RFM 69 CW radio on board and few other nice additions.
Best sutable for Home Automation, IOT. Could be used as core board for radio controlling any DIY project. Y
- Dimensions 17mm x 17mm
- Sleep current consumption 7-9 uA or up to 3-4 uA with soldered(shortened) LDO jumper
- RFM69-CW (low power consumption version) 915, 868 or 433 MHz Radio transceiver
- Supply voltage 3.5-6.5 Volts
- The Digital and Analog pins are 3.3 volts
- FTDI header for programming
Pin out:
| Arduino Pins | Description |
|---|---|
| A4, A5 | Available ARDUINO analog GPIO / DIGITAL GPIO |
| D10 | Connected to RFM69 CS |
| ANT | RFM69 antenna |
| Vcc | Unregulated power up to 6.5 Volts |
| Gnd | Ground |
Arduino IDE Settings
programming FTDI adapter connection
The board is created by Koresh