Request a firmware build - 2.8.1

[pfeerick]

Ask here if you want/need specific options that are not included in the stock builds. Builds will be uploaded to here (same link as 'By request' below), so check it out before making a request just in case there is already a custom build with your chosen options...

The Language builds are automated builds based off of 2.8.1

Please remember to specify your transmitter when requesting a build ;)

• Language builds - zip file per transmitter containing all languages built, with a second zip for builds with heli page enabled.
• Language builds - more - zip file per transmitter containing all languages built, with variants for BLUETOOTH, HELI, BLUETOOTH+HELI, LUAMIXER where size and validity of options permit
• By request

[jiri-jirus]

hello, please, would it be possible to create TX16S EN BLUETOOTH builds automatically as new version of EdgeTX is released? many of us has this radio with BT, so we will always want this build.

Thank you

[pfeerick]

Sure can. I've added both bluetooth colorlcd multi-language builds, and also lua_mixer, so will see how they go... usually takes about 3 hours to build the full set, probably a bit more than 4 now 🤭

[tedsears]

Thanks Pete! You are always super nice about building the Bluetooth version, but if it's automated we won't have to bug you each time... Thanks!

[pfeerick]

Check out the second link above - now points to where the further variants exist -> https://github.com/pfeerick/lang-firmwares/releases/tag/latest

[gharris07]

Can you please post build 2.8.1 with Bluetooth enabled and Heli mode enabled for the Radiomaster TX16S and Radiomaster Boxer also.

[pfeerick]

Check out the second link above - now points to where the further variants exist, including BLUETOOTH+HELI -> https://github.com/pfeerick/lang-firmwares/releases/tag/latest

[Helipro]

Can you please post a build with the T16 with Mode 2, Bluetooth, Gvars, Us units, External access mod, Lua, and with NO heli and NO override channel function. Thanks so much!
EDIT: I was able to compile my own under the 2.8.1 branch with everything working properly just as was done for 2.8.
Thanks again!

[templeofthelord]

Hello, would it be possible to integrate a option to reverse the stick direction (throttle, elevator, aileron, rudder stick) for Taranis 9XE Hall?
The directions are shown wrong on the display, especially throttle and elevator.
Thank you

[pfeerick]

Can I just clarify also - I just realised you specifically said:

The directions are shown wrong on the display, especially throttle and elevator.

By this, do you mean these sticks themselves move the channels in the correct direction (without adding reversing to the mix or input)?

[templeofthelord]

My Radio https://www.mhm-modellbau.de/frsky-taranis-x9e.php

By this, do you mean these sticks themselves move the channels in the correct direction (without adding reversing to the mix or input)?
That`s right

OpenTX with horussticks option selected == EdgeTX X9E-Hall
OpenTX with horussticks option not selected == EdgeTX X9E

I tried all this

How are you flashing the firmware onto the radio?
flashing from SD-Card

horussticks' in the options list
is not shown with both builds, but in the older opentx-version (which is ok) it is also not shown

An integrated button for changing the directions of the sticks is missing

An automatic firmware compilier/download to choose all wanted options (for example shutdownconfirm and others) on EdgeTx-companion like before in OpenTx-companion is missing

So i will wait going to EdgeTx till this options are available, but i am afraid this will never be...

Thank you and greetings from Germany

[gagarinlg]

You are wrong there, take a look at
https://github.com/EdgeTX/cloudbuild

We are working on it.

[pfeerick]

Are you sure about that?

[templeofthelord]

i will check it again later and then i will give a feedback

[Rmsf33]

Hello, could you please edit the Taranis X9D Plus file? I would like it to be in Portuguese and that the Heli function is enabled. Thank you very much!

[pfeerick]

I've done two builds - link is in the first post - one is specifically v2.8.1, and the other is the current state of the 2.8 branch, i.e. a preview of 2.8.5.

FLAVOR=x9dp EXTRA_OPTIONS="-DTRANSLATIONS=PT -DHELI=ON" tools/build-gh.sh

[Rmsf33]

Eu fiz duas compilações - o link está no primeiro post - uma é especificamente v2.8.1 e a outra é o estado atual da ramificação 2.8, ou seja, uma prévia de 2.8.5.

FLAVOR=x9dp EXTRA_OPTIONS="-DTRANSLATIONS=PT -DHELI=ON" tools/build-gh.sh

Thank you very much! It worked, I just upgraded the firmware. I just noticed an oscillation in the sticks, if you look at the sticks graphics they are oscillating. But I performed a test and found that the same error occurs in all EdgeTx versions.

[pfeerick]

If by "oscillation" you mean the numbers are changing just slightly, then yes, a little noise is normal... the sample rate is that high you get that slight jitter shown on the display. We're probably going to drop showing the digit after the decimal so it's not visible, as it is of no consequence once fed to a flight controller, or dampened out by the jitter filter.