New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
No access protocol selectable for X10 with ISRM upgrade #487
Comments
@Skippydi could you please list your |
I didn't compile the firmware, but rather copied it to the X10s using the
Edge TX Flasher.
Raphael Coeffic ***@***.***> schrieb am Do. 22. Juli 2021 um
21:51:
… With my X10s with the ISRM upgrade, I cannot select an ACCESS protocol in
binding mode.
*General information*
- EdgeTX version ( 2.4.0 and 98b1cd3
<98b1cd3>
)
- Hardware (Frsky Horus X10s with ISRM Upgrade)
@Skippydi <https://github.com/Skippydi> could you please list your cmake
options used during compilation? This configuration is not available by
default, it case that was what you were trying.
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<#487 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AQMQ6ORBJFYWQFMBNPSRKFDTZBSD3ANCNFSM5AZ3VM6A>
.
|
Ah ok! So this is normal: it is still assuming you have the normal iXJT inside. As the rest of the compilation options, this will come with the online build platform. |
No, sorry. I have changed the IXJT Modul to X10 ISRM upgrade Modul Kit.
Raphael Coeffic ***@***.***> schrieb am Do. 22. Juli 2021 um
22:29:
… I didn't compile the firmware, but rather copied it to the X10s using the
Edge TX Flasher. Raphael Coeffic *@*.***> schrieb am Do. 22. Juli 2021 um
21:51:
… <#m_9004046044584140863_>
Ah ok! So this normal: it is still assuming you have the normal iXJT
inside.
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<#487 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AQMQ6OWE2XLTFJV3GXRDCETTZBWTBANCNFSM5AZ3VM6A>
.
|
I see. As of now, this requires self-compiling, until we have an online platform that will allow us to support compilation options (or remove that compilation option and exchange it against a run-time option). |
@Skippydi have a look at https://github.com/EdgeTX/edgetx/wiki/Building-and-debugging-EdgeTX to get your build environment setup and tips for self compiling. |
Wow great!! Thanks a lot for this info 👍🏽👍🏽👍🏽
Risto ***@***.***> schrieb am Do. 22. Juli 2021 um 23:03:
… @Skippydi <https://github.com/Skippydi> have a look at
https://github.com/EdgeTX/edgetx/wiki/Building-and-debugging-EdgeTX to
get your build environment setup and tips for self compiling.
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<#487 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AQMQ6OQRTEOMGOHGGWZNWTLTZB2SNANCNFSM5AZ3VM6A>
.
|
Closing as this is expected behavior. Feel free to continue to comment, or get help over on Discord. |
With my X10s with the ISRM upgrade, I cannot select an ACCESS protocol in binding mode.
General information
The text was updated successfully, but these errors were encountered: