This is a low-cost, easy to build and configure wifi-nameplate based on the nodeMCU's ESP-8266-Chipset.
You can change the displayed text and the busy/free-status easilie by browser. The status can be changed also manually by pushing the push-button :-)
- nodeMCU v3 (1-3 MB Flash)
- i2c Converter-Board for LQ-Displays
- 20x04 Liquid-Crystal Display (only optimized for this size)
- Push-Button
- 2 x Resistor 220 Ohm or 330 Ohm
- 1 x Resistor 10 kOhm
- red LED
- green LED
The display uses the 5 V VIN-Pin for powering. The Push-Button Pin is externally pulled up by a 10k-Resistor.
##Configuration
There are 4 Files in the Project-Directory presenting the default configuration for each line.
Change the wifi-configuration to your settings and the individual i2c-hex-adress of your display.
##Pictures
###Bootsplash
###Webserver-GUI
###Display in action