Skip to content

Home

Jump to bottom
CVLenerginet edited this page Sep 15, 2023 · 11 revisions

WARNING: THE WIKI IS OUT-OF-DATE.

It is useable but there might be a mismatch between the latest version of the PP-MTB and this documentation.

Welcome to the PP-MTB wiki!

PP-MTB (Power Plant and Model Test Bench) is a test bench for automation of custom simulations in both PowerFactory and PSCAD with external visualizing of results. The PP-MTB is meant as a tool to help guide facility owners in checking simulation and plant performance of RMS- and EMT-models in regards to the danish grid code and the requirements for simulation models. A set of predefined cases are available with the option to add custom cases or remove exisiting ones.

Please take your time and go through the PP-MTB README. This contains a lot of information regarding requirements, contribution, contacts and more.

Quickstart Guide

Start by filling out the 'TestCases.xlsx' document contained in both the PowerFactory and PSCAD folder (keep in mind, that if you are using the PP-MTB for both PSCAD and PowerFactory, fill out and use only one of the two.). To get acquainted with this document, follow the quickstart guide below.

Once 'TestCases.xlsx' is filled out with model-specific information, you can use the test bench for PowerFactory and/or PSCAD. Follow the quickstart guides for either below.

After running the PP-MTB for PowerFactory and/or PSCAD, you can use the Plotter tool to plot the results. Follow the quickstart guide below.

For further questions or help, please check if the README or the Quickstart Guides contains the answer, otherwise please contact either:

Clone this wiki locally