[ERF][Toolhead_Modifications] Port CW2 Main Bodys from CW2 motor plate RC1 to Release Version

[EmJay276]

This PR applies changes done to the CW2 motor plate from RC1 to Release version to all Clockwork2 main bodys.

Additonally adds a M6 bowden fitting version of the main body without sensor and a stronger latch.

Update
I also converted the Toolhead_Modifications to the new motor plate for consistency

[Tyler8299]

most all mid plates will need updated too as most are the older thicker design single sensor and dual sensor with ecas

[EmJay276]

@Tyler8299

most all mid plates will need updated too as most are the older thicker design single sensor and dual sensor with ecas

What thickness did change?
I didn't see any differences in the CAD data despite the red "edge" that was removed/shrinked.

I am already using the new M6 body without any issues SB_CW2_Body_M6

[Tyler8299]

[Tyler8299]

all the mid plates we offer have the thicker tongue

[Tyler8299]

[Tyler8299]

and the latch and motor plate is universal between what we offer for no confusion

[EmJay276]

My designs are all based on the Main Bodys of the Filametrix Repo with the sensors.
I just removed the additional material that was marked in red in the first post.
If you didn't change the Filametrix parts, they will fit. My parts are already approved by @sorted01 in the original Filametrix repo. sorted01/Filametrix#40
The original latch is compatible with the additonal M6 main body, I just added a little more sturdy handly if you use the M6 body.

[EmJay276]

I also converted the Toolhead_Modifications to the new motor plate for consistency, see 0afea0e

[Anollya]

FYI:
Bigtreetech has yesterday updated the EBB SB2240_2209 CAN STLs including the main_body and the cable cover -> V1.2
https://github.com/bigtreetech/EBB/tree/master/EBB%20SB2240_2209%20CAN
Is it interesting for the Filament Cutter Mod?

[EmJay276]

FYI: Bigtreetech has yesterday updated the EBB SB2240_2209 CAN STLs including the main_body and the cable cover -> V1.2 https://github.com/bigtreetech/EBB/tree/master/EBB%20SB2240_2209%20CAN Is it interesting for the Filament Cutter Mod?

If I understand this correct, the new EBB SB2240_2209 CAN STLs is for the new CW2 motor plate, isn't it?

[Anollya]

Yes, for the new motor plate and it has for the new EBB cover a rounded edge.
I have made a new motor plate cut together with prusa slicer -> new btt motor plate with ecas, toolhead sensor and Filamentrix Cutter.
I think this is the first one.

May be anyone would test it:
SB_CW2_new_motor_plate_BTT_EBB1_2_Toolheadsenor_ECAS_Filamentrix_Cutter.zip

[jfgordon2]

I’m just some dude trying to print your files for his build, but I’m wondering if you know why the ECAS latch has to get thinner closer to its hinge, or if we can keep the thickness from the regular latch and only make room for the ECAS for the modification?

[EmJay276]

I’m just some dude trying to print your files for his build, but I’m wondering if you know why the ECAS latch has to get thinner closer to its hinge, or if we can keep the thickness from the regular latch and only make room for the ECAS for the modification?

I can have a look at it on the weekend, we can probably keep the regular thickness.

Would you be available for testing a new ECAS latch if I design it?

[jfgordon2]

I’m just some dude trying to print your files for his build, but I’m wondering if you know why the ECAS latch has to get thinner closer to its hinge, or if we can keep the thickness from the regular latch and only make room for the ECAS for the modification?

I can have a look at it on the weekend, we can probably keep the regular thickness.

Would you be available for testing a new ECAS latch if I design it?

Of course!

[jfgordon2]

Yes, for the new motor plate and it has for the new EBB cover a rounded edge.

I have made a new motor plate cut together with prusa slicer -> new btt motor plate with ecas, toolhead sensor and Filamentrix Cutter.

I think this is the first one.

May be anyone would test it:

SB_CW2_new_motor_plate_BTT_EBB1_2_Toolheadsenor_ECAS_Filamentrix_Cutter.zip

@Anollya I printed this off and it seems dimensionally accurate, but the tongue snapped off with the eSUN ABS+ I used, so I'm reordering something with better layer adhesion to fully assemble the stealthburner with this and the EBB cable cover.

Update: I was able to print these and successfully build. I am guessing my print settings may have led to my frustrations with the thinner tongue since it only attached on the layer below in very small areas. With it in place, I'm more concerned now with using the thin ECAS latch.

[Tyler8299]

Reading this makes another +1 in my book for the older style with beefier tongue.

[EmJay276]

Reading this makes another +1 in my book for the older style with beefier tongue.

The beefier tongue is the newer style

[EmJay276]

@jfgordon2
I just added the stronger ECAS latch
In CAD it fits, would be a charm if you could test it.

Edit: Chamfer added in 3c70f10