Skip to content

EnterpriseDB/edb-postgres-for-kubernetes-charts

Repository files navigation

EDB Kubernetes Operator Helm Charts

Helm charts to install the following Operators:

  1. EDB Postgres for Kubernetes operator (PG4K), designed by EnterpriseDB to manage PostgreSQL workloads on any supported Kubernetes cluster running in private, public, or hybrid cloud environments. Derived from CloudNativePG's Helm chart.

  2. EDB Postgres Distributed for Kubernetes (PG4K-PGD), designed by EnterpriseDB to manage EDB Postgres Distributed v5 workloads on Kubernetes, with traffic routed by PGD Proxy.

Usage

Before deploying the charts, add the following repository by running:

helm repo add edb https://enterprisedb.github.io/edb-postgres-for-kubernetes-charts/

You can then run helm search repo edb to see the all the available charts.

Deployment of the EDB Postgres for Kubernetes operator (PG4K)

helm upgrade --install edb-pg4k \
  --namespace postgresql-operator-system \
  --create-namespace \
  edb/edb-postgres-for-kubernetes

This will create a deployment in the postgresql-operator-system namespace. You can check it's ready:

$ kubectl get deployments -n postgresql-operator-system
NAME                                   READY   UP-TO-DATE   AVAILABLE   AGE
edb-pg4k-edb-postgres-for-kubernetes   1/1     1            1           11s

Once it is ready, you can verify that you can deploy the sample cluster suggested by the helm chart.

Single namespace installation

It is possible to limit the operator's capabilities to solely the namespace in which it has been installed. With this restriction, the cluster-level permissions required by the operator will be substantially reduced, and the security profile of the installation will be enhanced.

You can install the operator in single-namespace mode by setting the config.clusterWide flag to false, as in the following example:

helm upgrade --install edb-pg4k \
  --namespace postgresql-operator-system \
  --create-namespace \
  --set config.clusterWide=false \
  edb/edb-postgres-for-kubernetes

IMPORTANT: the single-namespace installation mode can't coexist with the cluster-wide operator. Otherwise there would be collisions when managing the resources in the namespace watched by the single-namespace operator. It is up to the user to ensure there is no collision between operators.

Deploying EDB Postgres for Kubernetes (PG4K) operator from EDB's private registry

By default, PG4K will be deployed using images publicly hosted on Quay.io, without a pullSecret but requiring a license key.

Additionally, both the operator and the operand images required by PG4K may be pulled from the k8s_enterprise or k8s_standard repositories at docker.enterprisedb.com, available with an EDB subscription plan.

To do that, you need to configure the chart to pull images from a private registry (this works similarly in case you want to host the operator images in your own private registry).

For example, to deploy via the k8s_enterprise repository:

helm upgrade --install edb-pg4k \
  --namespace postgresql-operator-system \
  --create-namespace \
  --set image.repository=docker.enterprisedb.com/k8s_enterprise/edb-postgres-for-kubernetes \
  --set image.imageCredentials.username=k8s_enterprise \
  --set image.imageCredentials.password=<THE-TOKEN> \
  --set image.imageCredentials.create=true \
  --set imagePullSecrets[0].name=postgresql-operator-pull-secret \
  --set config.data.PULL_SECRET_NAME=postgresql-operator-pull-secret \
  edb/edb-postgres-for-kubernetes

Note: If instead you want to deploy using the k8s_standard repository, you can do that by adjusting the following settings in the above example:

  • Set image.repository to docker.enterprisedb.com/k8s_standard/edb-postgres-for-kubernetes
  • Set image.imageCredentials.username to k8s_standard

Deployment of the EDB Postgres Distributed for Kubernetes operator (PG4K-PGD)

Note: the edb-postgres-distributed-for-kubernetes chart will by default also install the PG4K and cert-manager operators, which are dependencies. You can avoid this if necessary. See the sub-section on deploying individually.

Note: this helm chart uses a default registry to retrieve the operator images from: docker.enterprisedb.com/k8s_enterprise_pgd. If you want to use another registry, you will need set it explicitly. For more information please see the section on controlling the image repositories.

Note: You will need credentials to retrieve the various operator and operand images. Make sure to replace USERNAME and PASSWORD with your own credentials in the command below, which uses the k8s_enterprise_pgd image registry by default:

helm upgrade --dependency-update \
  --install edb-pg4k-pgd \
  --namespace pgd-operator-system \
  --create-namespace \
  edb/edb-postgres-distributed-for-kubernetes \
  --set image.imageCredentials.username=${USERNAME} \
  --set image.imageCredentials.password=${PASSWORD}

Once the above runs, a new namespace pgd-operator-system will be created, with several deployments, including the two operators.

$ kubectl get deployments -n pgd-operator-system
NAME                                                   READY   UP-TO-DATE   AVAILABLE   AGE
edb-pg4k-pgd-cert-manager                              1/1     1            1           7m46s
edb-pg4k-pgd-cert-manager-cainjector                   1/1     1            1           7m46s
edb-pg4k-pgd-cert-manager-webhook                      1/1     1            1           7m46s
edb-pg4k-pgd-edb-postgres-distributed-for-kubernetes   1/1     1            1           7m46s
edb-pg4k-pgd-edb-postgres-for-kubernetes               1/1     1            1           7m46s

When the deployments are ready, you can verify that the steps suggested by the helm chart are working:

  • set up a cert-manager issuer
  • deploy an example 3-region PGD cluster

Deploying the operators individually

The chart edb-postgres-distributed-for-kubernetes is set by default to also install PG4K and cert-manager operators, which it depends on. When following this route, all operators will be installed in the same namespace. This is in contrast with other installation paths, where the operators reside in dedicated namespaces.

Installing all dependencies in the same namespace is a design limitation of Helm, but we can get around it by installing dependencies with separate invocations of helm.

If you would like to install the operators in separate namespaces, please follow the below steps.

Setup PG4K

First, deploy the PG4K helm chart.

Setup cert-manager

EDB Postgres Distributed for Kubernetes also requires Cert Manager 1.10 or higher.

Note: In case a supported version of the cert-manager operator is already deployed in your K8S setup, you can skip this section and go directly to the setup of PG4K-PGD.

You can decide to either:

  1. Also deploy cert-manager in its own namespace
$ helm repo add jetstack https://charts.jetstack.io
$ helm upgrade --install cert-manager jetstack/cert-manager \
  --create-namespace \
  --namespace cert-manager \
  --version "v1.11.1" \
  --set installCRDs=true \
  --wait

In case you choose this option, remember to also specify --set cert-manager.enabled=false during the installation of the PG4K-PGD helm chart in the next section.

  1. Deploy cert-manager as a PG4K-PGD dependency

This is the default option. Unless --set cert-manager.enabled=false is set during the installation of the PG4K-PGD helm chart, cert-manager will be installed as part of the PG4K-PGD namespace.

Setup PG4K-PGD

Once the above deployments are ready, you can run the PG4K-PGD helm chart, taking care to set edb-postgres-for-kubernetes.enabled to false, and in case you also installed cert-manager separately, also set cert-manager.enabled to false.

Note: In the following example, cert-manager will be installed alongside PG4K-PGD in the same namespace. If you don't want that, set cert-manager.enabled to false. See the cert-manager section.

```console
helm upgrade --dependency-update \
  --install edb-pg4k-pgd \
  --namespace pgd-operator-system \
  --create-namespace \
  edb/edb-postgres-distributed-for-kubernetes \
  --set edb-postgres-for-kubernetes.enabled=false \
  --set image.repository=docker.enterprisedb.com/k8s_standard_pgd/pg4k-pgd \
  --set edb-postgres-for-kubernetes.image.repository=docker.enterprisedb.com/k8s_standard_pgd/edb-postgres-for-kubernetes \
  --set config.data.PGD_IMAGE_NAME=docker.enterprisedb.com/k8s_standard_pgd/postgresql-pgd:15.6-5.4.0-1 \
  --set config.data.PGD_PROXY_IMAGE_NAME=docker.enterprisedb.com/k8s_standard_pgd/edb-pgd-proxy:5.4.0 

Note: in the above command, the flags setting the credentials were elided to put the focus on the enabled=false condition. The flags may still be necessary, unless the credentials are provided in the values.yaml file.

You can see the two separate namespaces, the same that would be created if installing manually without Helm charts.

$ kubectl get ns
NAME                         STATUS   AGE
default                      Active   6m28s
…
pgd-operator-system          Active   55s
postgresql-operator-system   Active   5m33s

Controlling the image repositories

The various operator and operand images necessary for PGD may be pulled from a variety of repositories. This helm chart uses k8s_enterprise_pgd as the default repository. If you want to use another, you will need to fill in the image registry and the credentials, according to your subscription plan. This needs to be done in several places in the command-line invocation.

The following example uses the k8s_standard_pgd registry in docker.enterprisedb.com. Note the multiple --set options, for the image.repository, PGD_IMAGE_NAME and PGD_PROXY_IMAGE_NAME in addition to the edb-postgres-for-kubernetes.image.repository where the PGD operator is pulled from. 4 in total. Assuming that you have your necessary credentials, please fill in the USERNAME and PASSWORD below.

helm upgrade --dependency-update \
  --install edb-pg4k-pgd \
  --namespace pgd-operator-system \
  --create-namespace \
  edb/edb-postgres-distributed-for-kubernetes \
  --set image.imageCredentials.username=${USERNAME} \
  --set image.imageCredentials.password=${PASSWORD} \
  --set image.repository=docker.enterprisedb.com/k8s_standard_pgd/pg4k-pgd \
  --set edb-postgres-for-kubernetes.image.repository=docker.enterprisedb.com/k8s_standard_pgd/edb-postgres-for-kubernetes \
  --set config.data.PGD_IMAGE_NAME=docker.enterprisedb.com/k8s_standard_pgd/postgresql-pgd:15.6-5.4.0-1 \
  --set config.data.PGD_PROXY_IMAGE_NAME=docker.enterprisedb.com/k8s_standard_pgd/edb-pgd-proxy:5.4.0

Deployment using local chart

To deploy an operator from source, first clone the current repository locally and then run the following command: (Example for EDB-PG4K)

helm upgrade --install edb-pg4k \
  --namespace postgresql-operator-system \
  --create-namespace \
  charts/edb-postgres-for-kubernetes

Note that the image locations and the credentials are elided. Please refer to the sections above for directions.

If you update the version of the dependency charts and want to install from source, remember to run helm dependency update and helm dependency build in the chart directory before installing from the source.

Copyright

edb-postgres-for-kubernetes-charts is distributed under Apache License 2.0.

IMPORTANT: Both the operators and the operand images are distributed under different license terms, in particular the EDB Postgres for Kubernetes operator and the EDB Postgres Distributed for Kubernetes operator are distributed under the EnterpriseDB Limited Use License.

Copyright (C) 2021 EnterpriseDB Corporation.