V2. Deploy an ArcGIS Pro Single Use

This workflow guides you through the first-time installation of ArcGIS Pro software on a single machine. When the PowerShell DSC for ArcGIS module is finished, your machine will have ArcGIS Pro installed and licensed.

Prepare your deployment

Before you run the command to the module in PowerShell DSC, you’ll need to obtain the necessary files and resources and add them to your local machine.

Note: We recommend you use WMF 5.x for the best experience.

Log in to the machine on which you'll be installing ArcGIS Pro. You should have PowerShell DSC, 7-Zip, and administrative authority on the machine.

Caution: The PowerShell DSC for ArcGIS module uses 7-Zip; if the tool is not already installed on your machine, the module will attempt to download and install it. This may be blocked by your firewall, so it's best to have the tool already installed on the machine before you begin.

You can prepare the files either through GitHub or using the PowerShell gallery:

Option 1: Prepare your deployment using GitHub

1. Clone this repository to your local machine.
2. Add the "ArcGIS" modules folder to your PsModulePath, or copy the modules into the default PowerShell Modules folder (e.g. C:\Program Files\WindowsPowerShell\Modules).
3. Log in to My Esri. Download your ArcGIS Pro software installation files and licenses to the machine.

Option 2: Prepare your deployment using the PowerShell Gallery

1. Log in to my.esri.com. Download your ArcGIS Pro software installation files and licenses.
2. Install the ArcGIS module using the command Install-Module arcgis.
3. Download the SampleConfigs files from the GitHub repository.

Edit the configuration file

1. Open the Pro-SingleUse.json file from the SampleConfigs folder on your local machine.
2. Replace the placeholder variables in brackets with your deployment properties and parameters. Refer to the Variables reference page for a full list.

Install your deployment

In PowerShell DSC, run the Configure-ArcGIS cmdlet and provide the path to the configuration file as an input parameter. Mode and Credential are optional arguments.

 Configure-ArcGIS -ConfigurationParametersFile [[Path to Configuration JSON File]] -Mode [Install | InstallLicense | Uninstall ] -Credential [Config RunAs - Optional]

or

Configure-ArcGIS [[Path to Configuration json File]] [Install | InstallLicense | Uninstall ] -Credential [Config RunAs - Optional]