# Evohome Controller
# Copyright (c) 2017 Evsdd 
# Python 2.7.11
# Requires pyserial module which can be installed using 'python -m pip install pyserial'
# A Python script designed to function as a prototype Evohome controller using an RFBee or similar serial
# device
# The script can bind with HR92 radiator controllers and send configuration information (setpoint etc)
# 
# INSTRUCTIONS FOR USE:
# To begin using the script, first configure the serial device parameters: baudrate and port.
# Set Zone_num to the number of HR92 devices you wish to control.
# Finally, enter each of your zone names into the second value in each row of the Zone_INFO array.
# You are now ready to run the script!
# Follow the device binding sequence for each HR92 device, beginning with the device you wish to be
# associated with Zone 1 etc.
# Once all your devices have been bound you can stop the script and update the first value in each row of
# Zone_INFO with the DeviceID (TYPE:ADDR) and set Device_count to your number of devices.
# This allows the script to be run again without requiring re-binding of each device.