Config stored on RX on each quad #2047
Replies: 3 comments 4 replies
-
So basically if we use Modelmatch all elrs setting should be stored for each ELRS setting ? Isit not yet the case ? From my side, to setup channels, endpoinds low high thresholds asign switches on both sides is annoying.. Would be nice if we can assign/define in Edge Tx our controls Arms switches our stick axis our endpoints with labels etc in Betaflight nothing to set just select ELRS ? (Possibly a library in EdgeTx, select Betaflight, library, Ardupilot library with all available switch/stick labels options controls options etc, in Edge Tx you than pick from the library assign/define/label any available function, to switches, then it matches the Fc and no more need to setup both sides Fc ? |
Beta Was this translation helpful? Give feedback.
-
Basically what you are asking for is model configurations (with or without model match), which we already have. |
Beta Was this translation helpful? Give feedback.
-
I think this is a good idea. I fly fixed wing planes, and have discussed this concept with a few people. The theory is that, if you have three models you want to fly, you switch on your transmitter and model A, and... go fly. Next flight you switch on your transmitter and model B and... go fly. Next flight you switch on your transmitter and model C and... go fly. The idea is that the setup for each model is stored in the receiver to match what the transmitter is sending. So there is nothing in the transmitter to select. There is no information about any particular model in the transmitter at all. It always sends the same thing regardless of what model is being flown. That's the way we used to do it back in the 70s before our transmitters had computers in them. ;-) |
Beta Was this translation helpful? Give feedback.
-
Hey guys, how are you doing?
I've been a user and promoter of the project since when it was just an idea, nothing was ready and we had to assemble our hardware...
But anyway, I updated all my quads recently to version 3.1.2 and an idea came to me...
Would it be possible to store the ELRS configuration in the Receiver of each drone, instead of having to change it every time we change drones? I'll give you an example: I have a cinematic filming drone, which I use with a packet rate setting of 150Hz, telemetry in 1:64... I have another Freestyle drone that I fly with a packet rate of 500Hz and telemetry 1:16. ..
This configuration of each model, store in the RX itself, and when the bind is done, send this config to the TX and automatically set the configuration...
Another point is that in BF 4.3, using the presets, we have to choose the packet rate update rate because of the filters and other things... It would help a lot if the RX saved the config and sent it to the TX when the bind was done ...
What do you think?
Beta Was this translation helpful? Give feedback.
All reactions