Skip to content
Configurations for the FABtotum and Slicers softwares.
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
Autodesk Inventor & Fusion 360 CAM
Cura Profiles
Simplify3D
Slic3r_Configs_FABtotum
palette_plus
README.md

README.md

FAB_Configs

Configurations for the FABtotum and Slicers softwares.

===IMPORTANT: Updated for FABLIN FW 1.1.0====

troubleshooting: Use these profiles at your own risk. Use hair spray for better adhesion OR raise the temperature to 50°C and above, max 75°C for PLA and ABS. To avoid clogging of the hotend, make sure to reduce the bed temperature as much as possible or keep the bed temperature close to 40°C for PLA, this makes cooling the cold end much easier.

Learn More: fabtotum.com/knowledgebase

You can’t perform that action at this time.
You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.