Skip to content

Latest commit

 

History

History
60 lines (40 loc) · 1.75 KB

README.md

File metadata and controls

60 lines (40 loc) · 1.75 KB
Raw

UCA_Education_Board

Board for Education with LoRa

Version 1.0.0, September, 2019

Author: Fabien Ferrero and Trinh Le Huy

This board was developed for education to support courses on embedded software, digital and analog electronic, telecommunication, signal processing and IoT.

The board is fabricated by RFThings.

Wiring

 ATMega328p       LoRa RFM95W 
                   Module
 D8          <----> RST
 MISO  (D12) <----> MISO
 MOSI  (D11) <----> MOSI
 SCK   (D13) <----> CLK
 SS    (D10) <----> SEL (Chip Select)
 D3          <----> DIO0
 D7          <----> DIO1
 D6          <----> DIO2
 3.3V        <----> Vcc
 A0          <----> BT0
 A1          <----> BT1
 D2          <----> BT2

USB Driver

The board is using CH340C chip for USB to You may need to install the driver to use the board: https://sparks.gogo.co.nz/ch340.html

Board programming

Select "Arduino Pro or Pro Mini" Select "ATMega328p (3.3V 8MHz)" Select the port

Schematic

The schematic of the PCB is available the Schematic section.

License

All rights reserved. This Gerber, program and the accompanying materials are made available under the terms of the MIT License which accompanies this distribution, and is available at https://opensource.org/licenses/mit-license.php This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Maintained by Fabien Ferrero