Skip to content

Releases: Fightingbox/DuelPad-A16-Software

0.7.8-r1.2

04 May 15:25
@Fightingbox Fightingbox
0.7.8-r1.2
504385f
Compare
Choose a tag to compare
0.7.8-r1.2 Latest
Latest

Change log:

Turn off the LEDs in FOCUS mode

Upgrade the firmware:

  • Unplug your device.
  • Put your device into Bootsel/USB mode. A new removable drive named RPI-RP2 should appear in your file explorer.
  • Drag and drop the flash_nuke.uf2 (.uf2 file) into the removable drive.(This will completely clears programs and configuration files.)
  • After about ten seconds, it will automatically enter the bootsel mode.
  • Then Drag and drop the GP2040-CE_XXX (.uf2 file) into the removable drive.
  • Wait for the device to automatically disconnect.

If you encounter problems updating firmware, please refer to the official firmware update tutorial.

Assets 4

DuelPad-A16 firmware v0.7.8-r1

01 May 09:50
@Fightingbox Fightingbox
0.7.8-r1
1a866d2
Compare
Choose a tag to compare
DuelPad-A16 firmware v0.7.8-r1

Note:

  1. Fix the DPAD switch is switched to LS, RS, and no indicator light appears after the button is pressed.
  2. Re-modified the 16KEYS layout displayed on OLED
  3. At present, all 16 keys have indicator lights on

Upgrade the firmware:
Unplug your device.
Put your device into Bootsel/USB mode. A new removable drive named RPI-RP2 should appear in your file explorer.
Drag and drop the flash_nuke.uf2 (.uf2 file) into the removable drive.(This will completely clears programs and configuration files.)
After about ten seconds, it will automatically enter the bootsel mode.
Then Drag and drop the GP2040-CE_XXX (.uf2 file) into the removable drive.
Wait for the device to automatically disconnect.
If you encounter problems updating firmware, please refer to the official firmware update tutorial.

Full Changelog: 0.7.8...0.7.8

Full Changelog: 0.7.8...0.7.8-r1

Assets 3

Duelpad A16 firmware 0.7.7

07 Apr 11:29
@Fightingbox Fightingbox
0.7.7
3bef847
Compare
Choose a tag to compare
Duelpad A16 firmware 0.7.7

Upgrade the firmware:

  1. Unplug your device.
  2. Put your device into Bootsel/USB mode. A new removable drive named RPI-RP2 should appear in your file explorer.
  3. Drag and drop the flash_nuke.uf2 (.uf2 file) into the removable drive.(This will completely clears programs and configuration files.)
  4. After about ten seconds, it will automatically enter the bootsel mode.
  5. Then Drag and drop the GP2040-CE_XXX (.uf2 file) into the removable drive.
  6. Wait for the device to automatically disconnect.

If you encounter problems updating firmware, please refer to the official firmware update tutorial.

Assets 4